How to Replace Headlight 2009-2015 Honda Pilot
Вставка
- Опубліковано 5 гру 2022
- Buy Now!
New Headlight Assembly from 1AAuto.com 1aau.to/ia/1ALHL01870
This video shows you how to install new, quality, TRQ headlight assemblies on your 2009-2015 Honda Pilot. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This process should be similar on the following vehicles:
2009 Honda Pilot
2010 Honda Pilot
2011 Honda Pilot
2012 Honda Pilot
2013 Honda Pilot
2014 Honda Pilot
2015 Honda Pilot
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oa2m/1AXAA00013
• 10mm Wrench 1aau.to/oLb/1AXAA00010
• 10mm Socket 1aau.to/oaKZ/1AXAA00017
• 8mm Socket 1aau.to/oaKZ/1AXAA00017
• Trim Tool Set 1aau.to/oUy/1AXXX00006
• Needle nose pliers 1aau.to/oxD/1AXAA00051
• Needle nose pliers 1aau.to/oxD/1AXAA00052
• Ratchet 1aau.to/obeM/1AXAA00016
• Socket Extensions 1aau.to/oa2Y/1AXAA00015
• Drill
• Gloves 1aau.to/oys/1AXSS00048
• Safety Glasses 1aau.to/osH/1AXAA00343
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thank you!! I watched this video a few times before replacing the headlights in a 2012 Pilot. I completed it without any frustration :)
Yikes. Glad I watched this before I got myself into this mess. Looks easier to just buy a new car.
Great video... Just did this today... couple of things the next guy should know... there are 4 screws securing the bumper/trim which are 'underneath' the front end and not mentioned; the one by each wheel well is easy enough to find... there are 2 others which are recessed and hard to see/find unless you are looking for them... or have the front end up high.. these professionals have a lift.. so no biggie to see that sort of stuff. A shade-tree mechanic like myself has a harder time when reaching under.... so put your Pilot on ramps or jack up the front end, it'll help. Don't need to remove the wheels& there are 3 trim screws (not 2 as in video) per wheel well... but they are accessible without taking off the tires if you have a shortie screwdriver or use a wrench with a screwdriver bit.
Never had to replace them when they were made out of glass! I miss those days.
If you’re just needing to replace a bulb, you do not need to go through all this trouble! I was able to just take off the air vent cover and the battery ground and reach behind to take off the coupler and replace the low-beam. No need to take off your entire bumper! At least not on my 2014.
I'm about to attempt a double headlight assembly, change out, and all new coil caps and plugs. Gonna be a long day.😂
This was super helpful. I got the job done thanks to this video!
Thank you so much for this video. I may have saved myself up to $1000 by doing this work myself.
excellent instructions I definitely will have a friend help me on this job
No wonder people just use the refinishing kit for their cloudy headlights. A sturdy build, but a way to pump up the labor cost to replace a headlight assembly.
Thanks just installed new headlights on my 09 pilot
Ugh seems like a lot but you make it look pretty easy. Good direction and instruction. 👍
Thank you
You're in too tight, lost me at under bumper...did you lift up the truck or what?
anyone have a part # for that lower bracket?
that is the long way, I have no idea why you would do it that way when you could simply just reach in there push the tab down remove the harness turn the headlight bulb quarter of a turn. Remove it, replace it with a new one reconnect the harness. There is no need to take off any of that stuff.
To install a new seven dollar headlight bulb go ahead and completely disassemble your whole f-ing car
All that for a lightbulb? 🤦🏻♂️
Just change my oil while at it lol