07-2011 Toyota Camary timing cover reseal

Поділитися
Вставка
  • Опубліковано 4 гру 2024

КОМЕНТАРІ • 105

  • @RTC_SA
    @RTC_SA 3 роки тому +4

    Good job, the best how to video on 2az, now i can fix that damn oil leak

  • @jamiewatson536
    @jamiewatson536 Рік тому +2

    Good tip with the zip tie on the chain and cam!

  • @babyjay5464
    @babyjay5464 2 роки тому +1

    Thanks brother.. From the Bayarea.. That helped out alot..

  • @cyrusmoser1090
    @cyrusmoser1090 3 роки тому +5

    Good job man! I do all my own work to my vehicles. I replaced the timing belt and water pump on 04 Sienna van pain in the butt

  • @luckymbatha2679
    @luckymbatha2679 2 роки тому +2

    Good work my man

  • @captainstress
    @captainstress Рік тому +1

    This is a good video. Thank you. Did you have to remove the power steering pump and alternator out of the way, too?

    • @vangmotive7023
      @vangmotive7023  Рік тому +1

      The powersteer pump will need to be undone and just let it hang there. Alternator will not be touch.

  • @oscary896
    @oscary896 3 місяці тому

    Nice video I’m going to attempt to do this in the next few days and you have good lighting good camera work and for an intermediate like myself it looks like it can be done

  • @mg-7047
    @mg-7047 Рік тому +3

    Thanks for the excellent tutorial! There's a chance I might have to do this on my '05 Camry SE 2AZ-FE. Funny how that front P/S fluid reservoir hose always seems to leak where it clamps. From the name, you're probably the same guy on toyotanation. Thanks again!

  • @robgonzalez6723
    @robgonzalez6723 Рік тому +1

    Awesome video bro

  • @robertforrester4019
    @robertforrester4019 3 роки тому +1

    great job!!! I don't see. much of a oil leak

  • @weimou4203
    @weimou4203 Рік тому +1

    Good demonstration! However, looking at 24:25, you might have forgotten to tighten one bolt. I hope I was wrong, though.

    • @vangmotive7023
      @vangmotive7023  Рік тому

      Yes, it was tighten down. Double check everything on the timing cover before assembling the side torque mount.

  • @richardmwenda1366
    @richardmwenda1366 3 роки тому +1

    Good morning nice one . Thank you for shearing the knowledge cheers cheers

  • @richardodegard2618
    @richardodegard2618 Рік тому

    Great job, does the 2016 Camry have the same configuration or is it different?

    • @vangmotive7023
      @vangmotive7023  Рік тому

      It's similar setup. but they just added dual vvt.

  • @villademorosc
    @villademorosc Рік тому +1

    Have to fix timing slap. This is only video comes close to describing the true process of my needs

  • @ceezauto213
    @ceezauto213 4 роки тому +2

    Hi great video does this apply to a 2009 scion TC ?

  • @pbhero
    @pbhero Рік тому

    Great video. I know dealerships basically over charge. But i came across this video looking to see why the dealership wants to charge $3300 on my 2014 model for timing cover reseal. Then $2400 for transmission cover seal, and $1500 for valve cover seal.
    Might as well buy a new vehicle.

    • @vangmotive7023
      @vangmotive7023  Рік тому

      I would recommend finding a trusted local shop that can do the job and get an estimate.

  • @ptlpszt1
    @ptlpszt1 3 роки тому +1

    Great video. Thank you

  • @oyen11
    @oyen11 3 роки тому +1

    Hi, can you please help me & make a video on how change a 2013 Toyota Corolla timing chain tensioner: seal only. (Because it's leaking)

    • @vangmotive7023
      @vangmotive7023  3 роки тому

      It will take some time, I don't really see the 2013 camry leaking from the chain tensioner. The 2013 and newer model tensioner likes to jump timing if it's not properly released..

  • @joecox9958
    @joecox9958 Рік тому

    very nice thanks! but it could be better if you explain a bit say when remove water pump pulley bolt you need to hold the pulley in some way, or I just guess.

  • @bloodangel9489
    @bloodangel9489 3 роки тому +2

    I have a 2010 Corolla. Does it apply to that engine? Took car to dealership, they quoted me 1800 dollar job on it.

    • @vangmotive7023
      @vangmotive7023  3 роки тому +1

      it will be the same engine. so yes.

    • @JirenT
      @JirenT 3 роки тому +1

      Bruh.. 1800? I got quoted for 2400 lmao.. i was like wtf

    • @vangmotive7023
      @vangmotive7023  3 роки тому

      @@JirenT lol,Price are never a set price in the auto industry. Labor, tax, and parts are really base on where u live.

    • @bloodangel9489
      @bloodangel9489 3 роки тому

      @@JirenT I ended up putting some thread on one of the sensors right below the chain tensioner. And guess what? It stop the oil leak. I guess the dealer was fucking wrong

    • @adamp2574
      @adamp2574 3 роки тому

      @@JirenT $2100 for me 14 Corolla S . Just go it done at the dealership , luckily I bought and extended warranty, and they paid for it. 19 hours of labor they said.

  • @amyhazelvang7198
    @amyhazelvang7198 Рік тому +1

    Good video brother

  • @nat15.9
    @nat15.9 Рік тому

    Please advise: Is this almost the same with 3zz of Altis 2004 ? , mine is now overwhelmed with oil leak all around the cover seam 😢, so I wish that I could follow all steps from this video to re-seal it all.

  • @mcornish2000
    @mcornish2000 Рік тому

    This is a great tutorial but I am stuck t the power steering pulley. I got the bolts out but it won't move. Can you help?

    • @vangmotive7023
      @vangmotive7023  Рік тому

      When you get the 2 bolts out, use a pry bar and just pry it, it should loosening up the pinch nut on the back

  • @የሥላሴባርያነኝ
    @የሥላሴባርያነኝ 4 роки тому +2

    I don't get it ? I thought 2.4L LE Camry with chain Timing Belt? What are u changing here? Dose Camry has a timing belt or chain belt? Mine Camry 2010 LE what u saying?

    • @vangmotive7023
      @vangmotive7023  4 роки тому +1

      Hi, this video cover timing cover reseal, the 2.4l are timing chain. They don't run a timing belt. These engine are known for oil leaks behide thing timing chain tensioner. Which is the timing cover that always leaks.

    • @cesarbriones2419
      @cesarbriones2419 2 роки тому

      If you have a chain you have 2.5L 2AR-FE(Toyota engine type) and 179hp.
      Here’s the catch most 2010 (made 09) or as late April 2010 have the 2.4L 2AZ-FE 169hp
      If your car was made after April chances are it was made in August 2010 thru March 2011 in Kentucky and has the 2.5L 2AR-FE. What’s the difference? All tbe timing components, chain, vvti (how the gas is fed into engine and the how engine valves signal for power, acceleration, deceleration) and that moves the phasers which the chain is attached to which is attached to the (bottom) crankshaft. It’s how the car turns combustion into velocity

    • @የሥላሴባርያነኝ
      @የሥላሴባርያነኝ 2 роки тому

      I thank you for ur professional explanation . Keep on the good job 👏.

  • @josuefelix7706
    @josuefelix7706 Рік тому

    I was replacing the valve cover gasket and a piece of hard plastic fell into the area where the timing chain is , tried to grab it and ended up falling all the way down to where i cant see it anymore. Do you think it ended up in the oil pan or should i try to remove the timing cover .. looks like a lot of work

  • @danielbishop5752
    @danielbishop5752 2 роки тому +2

    Great video. I used it for working on the same issue with my 07 Camry. It's got 172,000 and started leaking the the Exxon Valdeez yesterday. What's your take on Toyota not using a timing cover gasket or a valve cover gasket? Seems like this problem could be prevented if they used gaskets instead of just RTV.

    • @vangmotive7023
      @vangmotive7023  2 роки тому +1

      This engine does have a valve cover gasket but as for the timing cover using rtv. I believe it will be a similar problem even though using a gasket. When the casting was made, it was not perfect, so how they solve it by just using rtv to fill the gaps.. u can see it between the head and block, it does not sit flush to each other. The new subaru engine that switch over too timing chain also have this problem. Engine was not cast properly causing them to just use rtv to fill the gaps.

    • @danielbishop5752
      @danielbishop5752 2 роки тому +1

      @@vangmotive7023 I meant to say oil pan instead of valve cover..... great video. Very helpful. I've got mine torn down ready to reassemble after I get all of the parts. Thanks again.

  • @DLS_Chaos
    @DLS_Chaos 2 роки тому +1

    How long did this take? I need to replace my timing kit myself because I can’t afford to pay a shop to do it lol

    • @vangmotive7023
      @vangmotive7023  2 роки тому

      This took me 4hr. But I've done alot of them before so it will just depends on your knowledge of this engine. The book is around 5 to 6hrs.

  • @luckyme5122
    @luckyme5122 2 роки тому

    How much would a job like this cost ?? not sure if i have all the tools for this....

    • @vangmotive7023
      @vangmotive7023  2 роки тому

      Shop price can vary fron 800 to 1200 depending where you live.

  • @willpage79
    @willpage79 Рік тому

    2007 avalon can you do the timing cover without taking the engine out?

    • @vangmotive7023
      @vangmotive7023  Рік тому

      Yes, you can. You'll need to remove the lower engine mount on the passenger side and when you are ready to remove the timing cover you'll need to jack up the timing cover side as high as you can to have the engine Tilting so you can remove the timing cover.

  • @maxodorestant9053
    @maxodorestant9053 4 роки тому +1

    You did a terrific job, nice video.

  • @mileagerunner9759
    @mileagerunner9759 4 роки тому +5

    I can see why my Toyota dealership saiD it would cost $1650 for this service

    • @vangmotive7023
      @vangmotive7023  3 роки тому +5

      shop prices may vary depending where you live. I understand the frustration having to pay for a large bill. If you really break it down you have parts, labor, taxes plus supplies adds up very fast. As a professional we as a shop like to inspect vehicles and come up with a repair budget plan with the customer so you have no surprises. I highly recommend finding a trusted shop that will always look out for there customer than forcing a sell on the job.

    • @mileagerunner9759
      @mileagerunner9759 3 роки тому +2

      @@vangmotive7023 I am not frustrated at all and would pay it, but my service advisor just said check the oil level every two weeks and I would be fine . Car has almost 210,000 miles on it

    • @vangmotive7023
      @vangmotive7023  3 роки тому +1

      @@mileagerunner9759 that is good too know.

  • @truthbaetold
    @truthbaetold 4 роки тому +1

    Where is this place? Estimated costs???

    • @vangmotive7023
      @vangmotive7023  4 роки тому +1

      We are located in Kirkland wa. TLC autocare. Call for estimated

  • @vampyretier
    @vampyretier 2 роки тому

    Do you know if there is a difference in timing chain/vvt sprockets/guides kits available for these cars? I get mixed results when I try to find a kit for a 2008 2AZFE engine in a tC to a 2010 2AZFE tC. I thought all 2AZFE engines had the same timing components.

    • @vangmotive7023
      @vangmotive7023  2 роки тому +1

      If it's the same engine code it's the same everything.

  • @ahmadghosheh3104
    @ahmadghosheh3104 2 роки тому +1

    Great video, I like your approach, minimum parts removal, just get them out of the way.

  • @koriseitz2629
    @koriseitz2629 2 роки тому

    You don’t have to put the timing in Tdc when you remove the chain tensioner?

    • @vangmotive7023
      @vangmotive7023  2 роки тому

      For this engine you dont have to set it at tdc, this only works for the single vvt engine. For the newer dual VVT engine require you to set it to tdc to remove the tensioner if not then it will skip timing.

    • @koriseitz2629
      @koriseitz2629 2 роки тому

      @@vangmotive7023 is the 03 single or dual? Do you know?

    • @vangmotive7023
      @vangmotive7023  2 роки тому +1

      ​@@koriseitz2629 that engine will be a single VVT.

  • @salvadorurzua3060
    @salvadorurzua3060 Рік тому

    Does any one know or even the guy who made this video what is the total time it takes to do this job and I’m not talking about all data software either because they are not for the consumer please lmk thanks

    • @vangmotive7023
      @vangmotive7023  Рік тому

      This timing cover takes me about 3.5 hrs for the 4cylinder and 10hrs for the v6 model. Hopefully this helps answer your question.

  • @MrJoshdixon123
    @MrJoshdixon123 3 роки тому +1

    Nicely done, ive never messed with timing chains and im a bit hesitant. Your very skilled for such a young age. I have an 2002 camry 2.4L 4cyl that has some leaks around the same areas, does it have an internal oil pump? I heard you say this particular engine in the video didn't have one. Im trying to figure out where my problem lies. Do you know any common leaks on mine ? And lastly, about how much labor hours does this take if I decided to let a garage do it?

    • @vangmotive7023
      @vangmotive7023  3 роки тому +3

      The oil pump is mounted inside the engine, instead of the timing cover side. I believe the newer 2.4 engine are mounted on the timing cover side. But its very common for these engine to leak at the timing cover. As for book time/labor its usually about 7 to 8hrs.. so it will really depends up too. I have got it down to 4hrs doing this job.

    • @jasonk5244
      @jasonk5244 3 роки тому +1

      ​@@vangmotive7023 Thanks for your excellent video and advice. I have a 2008 corolla with less than 70k miles but leaking oil on one end that needs this timing cover sealing according to the dealership and also leaking on the opposite top end which they say needs a valve cover gasket replacement. Both services were to take 12hrs but I negotiated to 10hrs. The work has not been done yet because I'm still weighing my options. I wonder why the dealership is charging me for 10hrs if it can be done in 4hrs. The oil leak is visible on the outside but it's not dripping to the point of needing any oil top-ups between oil change intervals. How long do you think I can safely postpone/put off this service without having damaging repercussions, as I try to gather some financial momentum? Again thanks

    • @vangmotive7023
      @vangmotive7023  3 роки тому +3

      @@jasonk5244 12hr is out of range. Ideal range should be about 8hrs-10hr on book time. It is possible that they are charging you for both job, valve cover and timing cover reseal. the valve cover labor should not be add on for additional time because it is considered an overlap job with the timing cover reseal. In the automotive business side all shop uses a labor time guild line which was made by 1 master Technicians, 1 mid level tech and 1 entry level tech to come up with an average number. Which we call it the books or just book time . The books will call a job for 8 hrs- 10hrs but a experience Technician can have it done way under 8hr hours anything over the 8hrs the Technician is no longer getting paid and is working for free. The book times are created for estimate and to protect Technician pay. As some Technician will be on flat rate or a proformace base pay. As for your oil leak its hard to say but the way it sounds like you can hold off on the repair.. without seeing the car I would recommend checking your oil level every time you pump gas to keep an eye on the oil level.also I would recommend getting an second opinion from another trusted shop to access the oil leak. Hopefully this help answer your questions

    • @jasonk5244
      @jasonk5244 3 роки тому +1

      @@vangmotive7023 Hi thanks very much for taking your time to reply and helping me understand the timelines. I was so shocked about the diagnosis because the engine has relatively low miles (less than 70k) and I often keep up with oil changes but I guess it's more to do with age than miles. I'll take your advice to constantly check the oil and I'll ask around other shops. Again thanks.

    • @dwaynerattan6749
      @dwaynerattan6749 Рік тому

      ​@vangmotive7023 if I put a zip tie on the chain can I rotate crankshaft anti clockwise to release instead of reaching in with a screwdriver to unclip?

  • @dannysautorepair
    @dannysautorepair 2 роки тому

    Very good

  • @rs-zl7re
    @rs-zl7re 3 роки тому

    Good video.

  • @kingbam7062
    @kingbam7062 2 роки тому

    What yr camary and is this a 2.5 or 2.7

  • @alexandermorrekelly9774
    @alexandermorrekelly9774 3 роки тому

    can u tell me what noise is this??

    • @vangmotive7023
      @vangmotive7023  3 роки тому

      Do you have a video of it or can you describe what kind of noise and where you think it's coming from?

  • @scaryhorrormoviee
    @scaryhorrormoviee 4 роки тому +1

    Nice video bro im going to make my channel too

  • @cesarbriones2419
    @cesarbriones2419 3 роки тому +1

    Good shit

  • @dbfcrell8300
    @dbfcrell8300 3 роки тому

    I'm still trying to figure out what a Camary is.

    • @mdoc7
      @mdoc7 3 роки тому

      Made in Japan; in Japan, this car model is called "kanmuri," which means "crown."

    • @dbfcrell8300
      @dbfcrell8300 3 роки тому

      @@mdoc7 Oh that's neat.

  • @giovannirodriguez2852
    @giovannirodriguez2852 3 роки тому +2

    How much does work like this cost?

    • @vangmotive7023
      @vangmotive7023  3 роки тому +1

      This will vary where you live. Labor cost are different everywhere.

    • @giovannirodriguez2852
      @giovannirodriguez2852 3 роки тому +1

      @@vangmotive7023 ok how much did this special example cost? I’m being charged 1200 for the same work here in AZ

    • @giovannirodriguez2852
      @giovannirodriguez2852 3 роки тому +2

      @@vangmotive7023 and this video was awesome 😎

    • @vangmotive7023
      @vangmotive7023  3 роки тому +1

      @@giovannirodriguez2852 1200 sounds pretty close. Was it at a dealership?

    • @giovannirodriguez2852
      @giovannirodriguez2852 3 роки тому +2

      @@vangmotive7023 no it’s my neighborhood mechanic shop

  • @HonrUk
    @HonrUk Місяць тому

    ❤😊

  • @hermanjoseph7611
    @hermanjoseph7611 4 роки тому +1

    Is this a toyota dealership

  • @tdgdbs1
    @tdgdbs1 4 роки тому

    2011 Camry has the newer 2.5

  • @jasoncaldwell8880
    @jasoncaldwell8880 4 роки тому +1

    Can I have your shops name and number so I can call to get an estimate to fix same issue in my 05 Rav asap please?

  • @felixlechat1780
    @felixlechat1780 2 роки тому

    I have a Toyota Camry 2014 2.5L. It's got 368500km and started leaking, 500$CAD

    • @vangmotive7023
      @vangmotive7023  2 роки тому

      Fun times. Probably about time for a new engine.

    • @felixlechat1780
      @felixlechat1780 2 роки тому

      @@vangmotive7023 you think? I did all of it 85% mostly on the highway

    • @vangmotive7023
      @vangmotive7023  2 роки тому

      @@felixlechat1780 it will just depends on your oil services, if you services it around every 3k than you should be ok. I have seen some in the shop hitting 350k miles and still runs strong.

  • @beyond305
    @beyond305 3 роки тому

    just replaced that pcv hose, its a BITCH to get off

  • @butterflydoze
    @butterflydoze Рік тому

    Coulda left the water pump pulley on I did a head gasket on one of them