Great work! splendid video, now, there is a reason why universal generic controllers include a " device " button, but other than that, this was great man, respect.
Hello i have a question. So when you have the emmiter code or led i cant see any line of code that identifies pin number of the led so it doesnt know wheres the led can someone explain???
To make ReceiveDump example work on the NANO, the IR sensor had to be connected to pin D2. Don't know why it wasn't a simple #define on the project source code. But the biggest problem is, you show all the wiring steps to the IR controller, but you don't show where the code is available.
Hello bro i have a doubt using this i cant upload code to attiny 85 its showing serial.println not declared in the scope. i get keep on getting the same error. but i can upload blink sketch perfectly on attiny 85. but this not working. Please help me
Can this remote be used to turn on a Dell company project. My Dell company projector remote has got damaged. So can I make this remote to operate Dell projectors. Please reply.
I was wondering if this can be achieved on a windows operating system?And if yes what programs do you exactly use from your pc to bring this remote to life?
Hi, thanks for the video! Really awesome. I have a question if you don't mind. Is it possible to add a button that controls a specific function of the device? for example, if I want to desaturate all the colors of my tv. Thanks again!
As far as I know that would only be possible if your TV had some kind of programmable function that let you make specific settings that could be controlled with a remote. If it had some sort of custom picture mode, and it had a setting to change picture mode profiles with a remote I assume it would be possible. It would require a smart TV that already had this kind of function.
Probably not exactly what you were imagining, but I reckon it must be possible to send a sequence of IR values, rather than just a single one. This means that you could hard code a sequence that opens your TV settings, navigates the menu and adjusts the values you want to change. However, this is really jank and probably won't be fast, since you would need to wait between each signal to make sure your TV has had time to execute the previous step (depending on your TV, opening the options or navigating the menu might take more than a second to complete). One example could be making a button to switch from HDMI input 1 to 2, where you could program a sequence where you first send the IR code for the 'sources', wait for a second, then send the IR code for 'down', wait another second and then send the IR code for 'enter'
thanks a lot, i have a question: what i should do if i have a decimal code not HEX, its a log code i got it from net and i have no idea how to convert it to HEX could you help me out
In Arduino IDE Software go to example and open IR Remote dump file and upload it to Arduino Uno board and IR Sensor connected to Arduino first then open serial monitor and Press any key of remote and showing Hex Code
Sir could you please answer , how can i put multiple hexa decimal codes of different remote in one button, could you please explain, it will be really helpful..
One big request bro Please upload atleast a crash course of pcb design using eagle software, my main doubt is how to add a logo in pcb board like yours.. bro pls
Is it possible to make 3 receiver and 3 transmitter using single arduino uno and each emitter must be sent only one hex code like if we have 3 emitter A,B,C A have some 0*ASEDYG B ____ & C HAVE some 0*IDEGJY. ..
Please help me. I have bought a projector with Amazon firestick. I want to make cloned remotes for both remotes...so I have spares. Also if these cloned remotes can be powered by rechargeable batteries and USB charger. How do I do that or if anyone anywhere in DELHI can do it for me and how much it can cost? Can I get spare ready built remotes?
Hii brother. Can you please make a automatic water level indicator just like kiyani tech made. Kiyani tech used only atmega ic instead of complete arduino board so circuit became quite difficult. Brother i request you to please make such project by using complete arduino board (instead of only atmega chip).
For all those who cannot find the code from library examples, download version 2.2.3. The current(latest) version does not have this code
Great work! splendid video, now, there is a reason why universal generic controllers include a " device " button, but other than that, this was great man, respect.
Thank you! This is just what I was looking for!
Marvelous! I like the way you explained each and every part of the project.
I love you and I love your work. You are great, all the words endure him.♥️♥️♥️♥️♥️🇸🇦🇮🇳
Goodnight! Could you show how you made the IRremote library work in ATTiny85?
same problem
Dude you're really smart.
Can the buttons sense how long they are held down for for something like turning a servo when the button is held?
Hi there, what program or website do u use for making the circuits diagrams? Like at 2:30
Looks like Fritz
Which prog. U have used for drawing breadboard and components ? Can I have the name and link
Freezing software
Sir circuit diagram
He shows it in the video, pay attention this is school 😂
0:53
The thing with TV remote is thay always send different value ( 30-50 diffrant values in round robin )
Same for Air Conditioner remote
.
I want the library for IR remote that you used to get hex codes from the remote.
What is the simulation program which you use it
Hello i have a question.
So when you have the emmiter code or led i cant see any line of code that identifies pin number of the led so it doesnt know wheres the led can someone explain???
same
Where you made this circuit diagram?
Great work and a very good explanation 🌟
Keep up the good work 👍
To make ReceiveDump example work on the NANO, the IR sensor had to be connected to pin D2. Don't know why it wasn't a simple #define on the project source code. But the biggest problem is, you show all the wiring steps to the IR controller, but you don't show where the code is available.
The Example sketch shown in the video doesn't seem to exist in the current version of the library.
yes i too cannot find it
hi, I need the circuit diagram of how you connected the components on the zero PCB
may I know which software are u using to design the circuit?
He‘s using Fritzing
I think it is Easyeda
Hello bro i have a doubt using this i cant upload code to attiny 85 its showing serial.println not declared in the scope. i get keep on getting the same error. but i can upload blink sketch perfectly on attiny 85. but this not working. Please help me
I have this model home theater and remote is not working.. help me to make a full version remote for that
So you used the chip so you can use the remote without the arduino?
Can we can do with adniuno uno
does this work with an arduino leonardo?
Very good presentation, easy to follow 👍
I want to make it with attiny85. But I don't know the circuit. I can't understand by looking in the circuit diagram. Can you please explain?
Can this remote be used to turn on a Dell company project. My Dell company projector remote has got damaged. So can I make this remote to operate Dell projectors. Please reply.
can you do that to audrino uno 3 ?
Is there an equivalent BT learning remote?
I'd love to build a learning remote that can also control my Chromecast with Google TV as well.
We can use making indian trains? Tell me bro
Can this remote be used to operate Dell projector. Please reply
Can you control a led board with this ?
Nice Boss......good job👍🏻👍🏻👍🏻
I was wondering if this can be achieved on a windows operating system?And if yes what programs do you exactly use from your pc to bring this remote to life?
Can be done as long as arduino software works on windows.
Prolem, lowpower library is not compatible with attiny
sir, whu no power coming to infrarad led ,even after pressing button...???? I've done every possible changes but not working..
becuase ir led output is not defined in the code
how about remote doesn't use infra-red?
Can you make one with the latest arduino IDE...
Hi, thanks for the video! Really awesome. I have a question if you don't mind. Is it possible to add a button that controls a specific function of the device? for example, if I want to desaturate all the colors of my tv. Thanks again!
As far as I know that would only be possible if your TV had some kind of programmable function that let you make specific settings that could be controlled with a remote. If it had some sort of custom picture mode, and it had a setting to change picture mode profiles with a remote I assume it would be possible. It would require a smart TV that already had this kind of function.
Probably not exactly what you were imagining, but I reckon it must be possible to send a sequence of IR values, rather than just a single one. This means that you could hard code a sequence that opens your TV settings, navigates the menu and adjusts the values you want to change.
However, this is really jank and probably won't be fast, since you would need to wait between each signal to make sure your TV has had time to execute the previous step (depending on your TV, opening the options or navigating the menu might take more than a second to complete).
One example could be making a button to switch from HDMI input 1 to 2, where you could program a sequence where you first send the IR code for the 'sources', wait for a second, then send the IR code for 'down', wait another second and then send the IR code for 'enter'
thanks a lot, i have a question: what i should do if i have a decimal code not HEX, its a log code i got it from net and i have no idea how to convert it to HEX could you help me out
In Arduino IDE Software go to example and open IR Remote dump file and upload it to Arduino Uno board and IR Sensor connected to Arduino first then open serial monitor and Press any key of remote and showing Hex Code
Hey 3:11 Why does some of the resisters go straight but some don’t? Some look like (L) and others (I).
What is the name of the emulator that you use for the diagram?
Nice very great project, wta how long the battery last?
can i use 5.7 k resistors for this?
can i use arduino uno r3 instead of arduino nano?
Of course, but it will be less compact
It dosn't work for the attiny send, librarys not compatible with attiny, please heeeelp
Great video. Much appreciated
Sir could you please answer , how can i put multiple hexa decimal codes of different remote in one button, could you please explain, it will be really helpful..
How far is remote can control?
can u help me to make drone controller....
What does capasitor do in reset pin?
One big request bro
Please upload atleast a crash course of pcb design using eagle software, my main doubt is how to add a logo in pcb board like yours.. bro pls
can i use this device for air conditioning?
Brother how did you programm your controller
can same code be programmed into the attiny85
Wow , I test it and got the error
and it has error in IRrecv V2 , Why ??
ngl this is very useful
Perfect. You are a fantastic man. Just perfect. pls....can you tell me .. which of name of software you use for the diagram??
How will i identify which button for?
Esp8266 ir remote blynk iot platform tutorial
the download link of the code and PCB order at web side NOT working ay more . please check and Fix it
I had a doubt that how a single button can transmit different ir signal for light,and volume in video.
Any institution of centre where we can learn . Please help ?
Is it possible to make 3 receiver and 3 transmitter using single arduino uno and each emitter must be sent only one hex code like if we have 3 emitter A,B,C A have some 0*ASEDYG B ____ & C HAVE some 0*IDEGJY. ..
Can u make to bluetooth remote,its have bluetooth. So we can use to gamepad,mi tv,etc
i like your quality
Please help me. I have bought a projector with Amazon firestick.
I want to make cloned remotes for both remotes...so I have spares. Also if these cloned remotes can be powered by rechargeable batteries and USB charger. How do I do that or if anyone anywhere in DELHI can do it for me and how much it can cost? Can I get spare ready built remotes?
i dont have the exempke code named IRrecvDumpV2 .... why? :(
same
Nice bro👌👌
Which application you make the drawing bro
Frizing
Excellent !! Well done 👏👏👍
Which application do you use for editing and which effect is used in showing the components required for the Project please do tell me
I am using FinalCutPro for editing
@@ViralScience hello. Can you please help me? I lost the remote of my treadmill and now I cannot use it.
Where can we find this codes from
Bro any.microcontroller we can use ??
Sir,
How is the Red switch on your remote connected? Which pin of the microcontroller?
I see this project in Great scott
Long life and prosperity
In my Arduino software in examples there is no IR remote can please give me the code for it
I need a pcb to suite onkyo stereo amplifier Model TX 840 bearing remote control no. RC 151S
Which programming language is used for the code in this remote?
How to mirror 16*2 lcd by using esp3266?
Please explain the concept in detail
Unable to download code from your webpage
what does the 32 mean in irsend.sendNEC(/*Hex*/, 32);
the data length in pulses are 32 bits long for NEC, and Sony uses 15 pulses, etc
How long the battery will last?
how to set a distance between infrared and receiver ?
Can someone garuntee me that this will work 100% on any device as long as there is an ir signal.
First learn the spelling of guarantee
@@Star_world.1325 Bro, seriously
Yess i tried without microcontroller and it's working fine...
at 1:17 what app is it?
Same code can we upload in attiny13 ic attiny2313 or not sie
Is this work for tv bro
Very good
Hii brother. Can you please make a automatic water level indicator just like kiyani tech made.
Kiyani tech used only atmega ic instead of complete arduino board so circuit became quite difficult. Brother i request you to please make such project by using complete arduino board (instead of only atmega chip).
ua-cam.com/video/WwGaTuqidGA/v-deo.html
Excellent diy
This is fake.infra rays refects on mobile cams.. In this video the IR led not blinking
Depends on if the camera has an IR filter on it genius
Can you me make a portal to a dimension I will so happy if you can do that for me😊
Doesn't work to control a TV. The library that does exist doesn't work for controlling a TV beyond turning it on and off.
Now a days You can't rely on tubers .Lot of frauds to get Likes
@@christycroos5340 iIF IT IS TRUE, THIS CIRCUIT IS A FRAUD, THE irRMOTE LIBRARY DOES NOT WORK ON attiny85, it only works on an arduino board.
which software you used for connection checking?
Which software do you use for the circuit designing bro?
this is fritzing
@@quantumfluctuations1 ohh
@@quantumfluctuations1 wait thats tinkercad
Ur given Gerber files doesn't get downloaded.