Peugeot 2008 Rear Disc and Pads and Wheel Bearing Replacement Overview
Вставка
- Опубліковано 27 сер 2024
- This is not a super in depth guide but it does show you have to replace the brake discs, pads and wheel bearings on the rear axle of a Peugeot 2008. This is a similar design to many other Peugeots.
As always, great tutorial and some good camera photography.
Thanks for the comment mate good to hear from you 😄
Looking good in the new colours!!! 😊
Cheers me old fruit 🍌
Best thing about coming back to a car you've worked on ... ... Wheel stuck on 😂😂
That’s just a given in Ireland bro
@@maxautouk sure sure 🤭
👀
You have a cameraperson now 😮
If you move over you can be my cameraman too 😘
@@maxautouk not got the mad wicked skills of this guy
💪🏽
Thank you 😊
Thanks
What size socket to undo the brake disc??
Same Q here. I had read it was 32mm but doing the job today it is larger.
@@mattbuckels46 it's 36mm mate found out of another video
Hi yea it is a 36mm hex nut, 38mm on some models and 40mm on the picassos
Dude, the 2008 doesn't have lifting points on the back or front, am i wrong? They are only on the sides.
I cant remember where but i did find somewhere to put a stand when i did a rear exhaust on one of these
What if i changed brake disc with bearing because it was excessive play on one side for two new ones and it still play on same side it was before even i changed the sides of new discs to check it's that bad bearing but it seems both bearings are good. What to do now ?
If the wheel moves and the caliper doesnt then its play in the wheel bearing
Its both impossible for new parts to be faulty
@@maxautouk i solved the problem by adding more torque to hub nut (I bought long breaker bar).