Hey, i am a student from india pursuing my degree in electrical engineering. For my final year project we are using this circuit with a CW multiplier. The wikipedia page and a few textbooks we referred to said that pulsated DC works with CW multipliers. The transformer output is pulsated DC ri8? Pls clarify if possible as it would help us a lot for the current project.
I've never seen a man so happy to almost get electrocuted Edit: Since so damn many of y'all think I'm new to this channel, let me resphrase my statement. Out of all his videos so far, I've never seen him so happy to almost be electrocuted. A now stop "welcoming me to the channel" and telling me to watch his other videos. I've been here for years people.
"Boom!" - Frankie the Flyback. Those arcs are massive for a 12 volt battery input. Really. There's an inherent risk of internal damage though if the high voltage is allowed to arc to anything but the high voltage ground wire. I think you've got your safety all squared away though :P Let me know if you need some design help with the Marx. I've built a few, and they have design consideration to take into account.
@@monujangid8372 oh frick my bad, I didn't see the k at the end and I didn't see a 1 at the beginning. So I just thought they had 33 subscribers. Sorry man.
@Mr Guy yes I have been on his channel before. I tapped on his icon but I was blind. I have no clue how I didn't see the k at the end of his subscriber count. But yeah, plasma channel has great content.
Ah finally, more painful learning! Also, you should put terminal blocks at the output so you don’t have to solder and desolder stuff when trying to modify the output load.
@@ElectroBOOM One thing! Just one thing! Please tell IT to me: WHY tf do I have so many fans even though no UA-camr is unprettier than I am? WORLDWIDE!!!! WHY??? Tell me, dear elec
@@thearchetype9829 Actually, Flash capacitors are meant to discharge a huge pulse of electricity (for gas flash tubes found in cameras). A VTTC generates constant high frequency pulses. The flash capacitors have to recharge, and they have such a high capacitance that they cannot operate at the right frequency, not without severely declining in efficiency. Not only that, but the high power DC output can actually damage your body. Conductor skin-effect will not apply, since it’s DC. It basically acts like a one-shot taser, outputting a fast pulse of high power DC that can paralyse muscles temporarily and cause electrical burns if it’s bad enough. VTTCs are high frequency AC, operating at essentially radio frequencies (since that’s what the tubes used were originally meant for - High power/range HAM radios) that can not interfere with muscles. They can burn your skin a little if exposed long enough, but it’s mainly safe to touch.
@@tomandjerry9729 2 months and only 91 likes 1 comment.. the notification of your reply just made me more depressed than I already was in my personal life... :(
Mehdi: Hey it's working! High voltage arcs! Transformer: **Burns and smokes** Mehdi: Oh no my alarm is gonna sound! But I have a solution! **Ha ha I go brrrrrrrrrrrrrrrrrrr.**
@@timmyg8888 Precisely. Although he thought the smoke didn't get to the sensor, he contributed to make helicopter noises. Hopefully he will make a video on this ventilater thingy-majig he is going to install, maybe a home made one (even though his mechanical skills are worse than his electrical ones!)
The arcs are electrically isolated from the rest of the circuit by transformer. You could make a common ground between them to make sure they blow up though!
@@ElectroBOOM This is an interesting point. However, considering how high the voltage is, with stray capacitive coupling everywhere and that only a few volts at DC would destroy the input of my spectrum analyzers, I am fairy sure even without a common-ground, it would destroy the input if I get close enough. It would be an interesting, (and expensive) experiment to do. I think it is right up your alley Mehdi! And of course as always, great work on the videos. I never miss one.
I don't know what I love most about electroBOOM. The mad scientist in you? The crazy funny editing and timing and your sense of humor? Your great wealth of knowledge and tutorial style mixed with explosions? All the adhoc projects and experiments? Or just that crazy accent that is pure gold to listen too? I don't know anything electronics, but it's always fun watching your stuff. I will learn one day!
As a precaution, I would recommend stabilizing your HV wire to something and holding a non-conductive ground wire towards the output, in order that you don't inadvertently reach towards the ground of the circuit while also holding the HV output / 6:28 Rather than that, it's a really well designed circuit with the slow-rise implementation you've done.
@@user-fv3kl7dc9n subscribe to his patreon, you get first access before it fully publishes on youtube. You don't even need to pay much. Like a dollar a month is enough
Are you saying you SHOULD be sad instead? Like there's some obligation to be miserable ? It's idiotic in fact... Sometimes you're sad and sometimes you want to express joy. If Mehdi got electrocuted again and it's hilarious, you laugh. No problem here.
Oh no OH GODS that's not an arc you want to be so close to, you see how it's all thick and flame like, and then the sparks start flying out? The sparks are molten steel from the contacts, and the arc looks like that because it carries quite the high current. At least be as profesional as me and duct tape the wire to an axe handle to keep safe distance man. Jokes aside that's one cool ark, and because it's high current it's also really stretchy, but in all seriousness, kids, don't do this at home, this could kill you, probably in multiple ways
I think you should make a Marx Generator. The arcs would be massive this way. You really shoud do it! By the way, great video as always.(Sorry if my English is bad, I'm acutally Turkish, and I'm trying to improve my English with watching English UA-cam videos of you and the other Electronics channels.)
4:54........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... you are a very hairy man.
"don't try this at home"
"but if you want to try this at home, here are all the schematics and circuit diagrams so you can build it yourself"
i think you can use the software he introduced in his last video
Try it outside maybe 🤔
Wtf 7 hours ago!?
@@Triospirit Patreons are earlier
the trick is to do it at your friend's house.
This video is sponsored by Arc Industries, helping you bridge the gap since 1950
Do you mean his eyebrow by saying gap.
@@Auroramystic r/idonthavereddit
When are you gonna make a hot glue gun 4 but with a laser
*[Lincoln Electric™ would like to know your location]*
@@Davwid did you see my web shooter teaser?
oh my god the eye rotating at 7:03 alone is worth a sub, the context leading up to it makes it even better.
2:53, my mind after hearing that sound: HELIKOPTER HELIKOPTER 🚁🚁🚁🚁 ...
When mehdi unplugged the sensor thingy I was like what the hell are you doin bro it would burn the sh*t out of you!
Over the years, it feels like we have watched this man turn into super villain...
What do you think about Rodin Coils, and what can you do with them?
6:20 I can feel my eyebrows being singed just from watching this XD
Best thumbnail ever
I wouldn't be surprised if I saw a video of him at the hospital someday.
Are the resistor and capacitor in the soft-starter (0:43) the same as those in the RC filter (0:18)?
THE FIRST THING I DO WHEN I MOVE INTO AN APARTMENT IS DISCONNECT THE SMOKE ALARM
Usually, when it smells like Ozone, it's time to stop. But not here.
Hey, i am a student from india pursuing my degree in electrical engineering. For my final year project we are using this circuit with a CW multiplier. The wikipedia page and a few textbooks we referred to said that pulsated DC works with CW multipliers. The transformer output is pulsated DC ri8? Pls clarify if possible as it would help us a lot for the current project.
I'm expecting him to become THOR one day
Have you seen a man that is really powerful that can’t even feel high voltage
And he can fix electricity
ua-cam.com/video/jtb89ZLuH-w/v-deo.html
Hi I like it very nice. Keep it up,😄
Hi mehdi pls answer
Why you didnt use your microwave transformer?
Mehdi: “Never try this at home!!!!”
Also Mehdi: disconnects house safety features
"Never try this at home"
...
"Anyway here's the video for how to do this"
“never try this at home”
“but here’s all the circuits and designs if you want to try it at home”
HERE LET ME DEMONSTRATE
That's why do it at school fair
#69?
Huh 🤔 wonder what are the other 68?
Mehdi: "Don't try this at home!"
Mehdi, 3 seconds later: "If you want to know how I made this..."
as Steve Spangler says: don’t try it at home, try it at a friend’s home
@@harrietjameson 😂😂
@@harrietjameson yes
Just try it at a friend's house!
We learn it so we can practice not doing it at home.
I've never seen a man so happy to almost get electrocuted
Edit: Since so damn many of y'all think I'm new to this channel, let me resphrase my statement.
Out of all his videos so far, I've never seen him so happy to almost be electrocuted. A now stop "welcoming me to the channel" and telling me to watch his other videos. I've been here for years people.
You must be new here. ;)
@@TheConjurersTower no I've just never seen him happy to almost be electrocuted. He usually has a worried or scared face when he tests things out
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
Lol😂
imagine if your teacher got electrocuted every 5 minutes
5:35 heaven moment xd
I wish I had someone who looked at me the way Medhi looks at high voltage.
@@onerandombruh u definitely saw the comments of his old taser vid lol
"Power! Unlimited power!" - Darth Mehdious
Hey The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
Zua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
Diode RECTIFIER!!
"NO! THAT'S IMPOSSIBLE!" - Like Mehdiwalker
Oooo this is good 🔥
"may the POWER be with you." the Dark Lord, Star Trek
"oh it smells like ozone" never heard a sane person say that
Not anymore If you're in the Stratosphere
You think he's sane?
I've said it lots of times... oh, wait...
it's typical if you've ever did something with high voltage
You said, sane xD
Most of the time he shocks himself for educational and entertainment value, but in this video he reaches 100% mad scientist mode and I love it.
"Boom!" - Frankie the Flyback. Those arcs are massive for a 12 volt battery input. Really. There's an inherent risk of internal damage though if the high voltage is allowed to arc to anything but the high voltage ground wire. I think you've got your safety all squared away though :P Let me know if you need some design help with the Marx. I've built a few, and they have design consideration to take into account.
@@poopman2904 no, he isn't.
Glad to see you everytime here Jay
@@monujangid8372 oh frick my bad, I didn't see the k at the end and I didn't see a 1 at the beginning. So I just thought they had 33 subscribers. Sorry man.
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
@Mr Guy yes I have been on his channel before. I tapped on his icon but I was blind. I have no clue how I didn't see the k at the end of his subscriber count. But yeah, plasma channel has great content.
Instead of being full of old toys and books, Mehdi’s basement is gonna be full of blackened transformer units and blown circuits
It probably already is.. XD
And instead of dust it's littered with the remains of exploded capacitors
The frequency to pain graph is the funniest thing I've seen in a while.
The only thing funnier is the video showing how he made it
Making a High Voltage Generator: The Good Ending.
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
@@thearchetype9829 ElectroBOOM also talks about flash capacitors in his USB Killer video.
@@thearchetype9829 stop spamming, seriously.
The (unfortunately) good ending
Damn straight, my good sire. 😎
Ah finally, more painful learning!
Also, you should put terminal blocks at the output so you don’t have to solder and desolder stuff when trying to modify the output load.
Hey, that's a good idea!!
@@ElectroBOOM One thing! Just one thing! Please tell IT to me: WHY tf do I have so many fans even though no UA-camr is unprettier than I am? WORLDWIDE!!!! WHY??? Tell me, dear elec
@@ElectroBOOM good idea for video make spark gap Tesla coil using this transformer
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
@@thearchetype9829 Actually, Flash capacitors are meant to discharge a huge pulse of electricity (for gas flash tubes found in cameras). A VTTC generates constant high frequency pulses. The flash capacitors have to recharge, and they have such a high capacitance that they cannot operate at the right frequency, not without severely declining in efficiency.
Not only that, but the high power DC output can actually damage your body. Conductor skin-effect will not apply, since it’s DC. It basically acts like a one-shot taser, outputting a fast pulse of high power DC that can paralyse muscles temporarily and cause electrical burns if it’s bad enough.
VTTCs are high frequency AC, operating at essentially radio frequencies (since that’s what the tubes used were originally meant for - High power/range HAM radios) that can not interfere with muscles. They can burn your skin a little if exposed long enough, but it’s mainly safe to touch.
One day he’ll stop uploading, and that’s when we’ll know.
We will know if he is dead
I take this as joke, cuz i assume he zap himself on purpose and he know what hes doing. Yeah, just my opinion
@@windestruct FO REAL BRO????
Don’t say that
@@avocadolfnonym4692 firstly, it is r/wooosh and second, you have no reason to wooosh me
December 31st 2020, 11:59 p.m.:
Electroboom succeeds in creating a circuit that generates gazillion volts. There is no 12:00 a.m.
Thus leaving us in the 2020 forever..
1.21 Gigawatts!
Electroboom caused 5G.
perfect end to the perfect year
Lets be honest this dude is way better at teaching us than teachers at schools😂
Nope not for me
Stating facts right there
Yes
So true!!. Except he won't be shocking himself at school for obvious reasons lol. Also this is gonna be the top comment.
@@sairuthvik7134 You are app right because school teachers dose not have practical skills bro
6:13 when ape makes fire first time
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
"Please, don't do this at home"
"Well, if you want to know how I made this here's an in-depth tutorial"
🤣I love electroboom
I wanna know his electricity bill
Edit:43 likes SOO GOOD!
NO
@shimulskitchens47002days ago
:/
The government is to scared to charge him
4:05 I feel that this is comeback of the heated chair
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
Omg I remember that
"Funniest shit I've ever seen"
Things that make Mehdi happy:
-Arcs
-Pain
-Jumpscares
-His children
-Full bridge rectifier
-Whatever marx thing that was in the video
-pain
pain peko
Is he naruto fan? (pain)
@@proffesor4709 dunno~~
Old communist electrical components.
You put pain twice
2:40 Ants: ok, MY HOUSE IS ON FIRE!
"Oh, it's burning... GOOD THING I REMOVED THE SMOKE DETECTOR"
lolll
(Becomes a helicopter)
"Don't try this at home! If you want to know how I made this..."
the duality of man
00:04:47 *Would shock the s**t out of you!* - Mehdi Sadaghdar 2020
2:56 why don’t you just build one😂
Exactly. I just realized, he even has a solder fume extractor fan. He could just use that instead 👁️👄👁️🤚
With no safety features, of course.
If they build they gonna lose hand.
"I really need to add powerful vents to my room"
*Mehdi was an Impostor*
Hello The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
Zua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
@@thearchetype9829 pls dont
SmarterEveryDay : Laminar Flow!
ElectroBOOM: ARC!
I love this side of UA-cam.
2:52 I wish I could move that fast!
and he only showed 0.1% of his power
What attackhelicopter model is that?
Same dude
Te be fair this man has the power of thousands of watts through his veins.
@@bertodg001 Nah that is just his natural movement speed. I want to see him move his version of fast.
"Don't try this at home" - Mehdi, trying it at home
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
@@thearchetype9829 Why are you on every comment
3:57 never gonna happen as you are the god of electricity!!!!!
Mehdi: being just happy and admires the arc
me: *touch it Mehdi. touch the arc.*
This Kills the Electroboom.
That would probobly kill him
7:07, *that's how the demon under my bed looks...*
Lol
@@tomandjerry9729 2 months and only 91 likes 1 comment..
the notification of your reply just made me more depressed than I already was in my personal life... :(
I laughed so fuckin' hard at that part lmao.
The only non-Science related part of his videos is when he says “Hi”
I would be an electrician if he was my teacher growing up.
Chances are that you wouldn't be for long.
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
Is that an insult? I can't tell. :)
oh man, show passion to inspire passion
that's what schools lack today
Show passion, TEACH passion.
He’s an engineer, that’s not what electricians do. Electricians install the equipment that the engineers design.
I like your newest video / audio effects
really gives a special flair to your content!
Wtf how did you commented 8hours ago???
What am I seeing ........😐...8 hours
Because Patreon
@@MohitSharmaxp i think patreons or some other kind of supporter can view the video early
@@agnelaustin2144 ummmm🤔 I still have doubts!
Mehdi: Hey it's working! High voltage arcs!
Transformer: **Burns and smokes**
Mehdi: Oh no my alarm is gonna sound! But I have a solution!
**Ha ha I go brrrrrrrrrrrrrrrrrrr.**
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
He became a helicopter
@@timmyg8888 Precisely. Although he thought the smoke didn't get to the sensor, he contributed to make helicopter noises.
Hopefully he will make a video on this ventilater thingy-majig he is going to install, maybe a home made one (even though his mechanical skills are worse than his electrical ones!)
2:47 Mr Bean
I want to try this in my lab. But if by mistake one of the arcs gets too close to one of my instruments, there goes $100k!
Imagine it arcs to the front end of the uxr scope
1.3$ million bye bye
no esd protection? ):
The arcs are electrically isolated from the rest of the circuit by transformer. You could make a common ground between them to make sure they blow up though!
@@ElectroBOOM it would be nice to see shahrihar doing that to one of his scopes or at least probes
@@ElectroBOOM This is an interesting point. However, considering how high the voltage is, with stray capacitive coupling everywhere and that only a few volts at DC would destroy the input of my spectrum analyzers, I am fairy sure even without a common-ground, it would destroy the input if I get close enough.
It would be an interesting, (and expensive) experiment to do. I think it is right up your alley Mehdi! And of course as always, great work on the videos. I never miss one.
5:48 maybe electroboom could’ve used that for his previous jacobs ladder
“Why is there so much wire under my chair?!?”
🤣🤣🤣. I started laughing so hard, I almost fell out my chair and onto a bunch of wire!
I think he's addicted to high voltage. Doesn't surprise me but the face.
4:20 me explaining project to team mates
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
The look of joy on his face is so pure, this made me incredibly happy. Good job
YOU HAVEN'T ZAPPED YOURSELF IN THIS VIDEO
But we had fire instead
Wow very rare
5:36 my face reaction when that thing finally worked an year ago
I don't know what I love most about electroBOOM. The mad scientist in you? The crazy funny editing and timing and your sense of humor? Your great wealth of knowledge and tutorial style mixed with explosions? All the adhoc projects and experiments? Or just that crazy accent that is pure gold to listen too? I don't know anything electronics, but it's always fun watching your stuff. I will learn one day!
The same,naturally i love the same things of this guy,he sometimes is creepy like a mad scientist but yeah,is very funny. XD
He speaks Farsi in a funny way too.
@@sirkooshiar
Yeah,true. XD
Mehdi: "Maybe i should make a Marx Generator"
Me: "Yeeeaah"
Mehdi: "Yeeeah"
Me: :0
Instructions unclear, made Capital generator instead
@@revimfadli4666 XD
2:23 freaking seals. makes my heart almost pops.
4:31 the best sounds effect ever
5:23 and it smells like OZON
As a precaution, I would recommend stabilizing your HV wire to something and holding a non-conductive ground wire towards the output, in order that you don't inadvertently reach towards the ground of the circuit while also holding the HV output / 6:28 Rather than that, it's a really well designed circuit with the slow-rise implementation you've done.
Funny you said that because the next video he posted (Marx Generator) he did EXACTLY THAT at 0:57, probably the nastiest shock i've seen from him.
guess he learned the hard way
whats a precaution? - electroboom
"let's make super high voltage"
"But I can't because this thing is TRASH"
"I really need to add a powerful vent to my room"
Proceeds being THE powerful vent
7:06 evil laught 🤣
Aaarc de triumph
How did you commented 9 hours ago 😐
@@user-fv3kl7dc9n subscribe to his patreon, you get first access before it fully publishes on youtube. You don't even need to pay much. Like a dollar a month is enough
@@xTerminatorAndy thanks for explaining.
Sadly in my country you can't subscribe to a patreon , netflix , youtube and lot others
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
@@user-fv3kl7dc9n well, reading and listening isn't forbidden, right?
Me seeing the nice white arc: ElectorBoom has reached his final form
5:30 best part
05:58 seeing him so happy makes me smile but then... sadness struck 😭
But then happiness again 👍
The video: 1 minutes ago
The comments: 7 hours ago
I know right
UA-cam is drunk.
ua-cam.com/video/eQ7SNyn3pCE/v-deo.html
patrion perks probaly
The video was published before on his Patreon
"don't try this at home"
-says the guy trying this at his home
That's why he's advising
He's experienced
@@Kitty-SicarioSan r/wooooosh
Finally, something besides election BS. You make me laugh with every video. Keep it up and be safe
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
I'm being electioncuted pls send help
6:30 happy diwali
@7:06 I guess this laugh justifies the name of the channel! All time viewer/subscriber btw, amazing work!
"My alarm is going to sound!! NOOO!!!"
just mourn an old friend passing.. Started watching this and was giggling after a few mins... Man i hate myself.. And love this!
watch the one where he tested GFCI outlet, and the one with Jacob's ladder, it's a prescription for lifting up spirit. Cheers
Are you saying you SHOULD be sad instead? Like there's some obligation to be miserable ? It's idiotic in fact... Sometimes you're sad and sometimes you want to express joy. If Mehdi got electrocuted again and it's hilarious, you laugh. No problem here.
"Don't try this at home"
Fine I'll try it at school
and then you get kicked out of school
7:33 my favourite evil scientist accent
0:03 Anybody else think that his induction heater looks like a planetary rover?
The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
ua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
@@thearchetype9829 Dude stop it. Spam is bad.
Oh no OH GODS that's not an arc you want to be so close to, you see how it's all thick and flame like, and then the sparks start flying out? The sparks are molten steel from the contacts, and the arc looks like that because it carries quite the high current. At least be as profesional as me and duct tape the wire to an axe handle to keep safe distance man. Jokes aside that's one cool ark, and because it's high current it's also really stretchy, but in all seriousness, kids, don't do this at home, this could kill you, probably in multiple ways
I can't tell my professor that you are my inspiration to stay active in EE lol
habibi you are so funny =]
x ⋅ ∞ = lol :)
He is not Arab he is iranian😁
@@salivan4688 lol
That ain't Farsi
@@demonking86420 no doost is farsi that mean friend habibi is Arabic 😄
5:10, #69
69
Ok, he posted, now I can be safe for another week..knowing he didn't accidentally kill himself.
7:46 the hell are you talking about, I'm making it as soon as I'm done with the video.
Hey The same arcs can also be produced by flash capacitors
So this is how a flash capacitor works
Zua-cam.com/video/SHwy6IRxAws/v-deo.html!!!
7:40 “Things are burning, good thing I unplugged that fire sensor thingy”
“don’t do this at home” anyways heres how i made it-
When the seals appeared I thought something blew up for a second.
"As a fan of super high voltage.."
despite my extremely poor English, I'm getting addicted to your videos, it's funny and I still learn something, thanks for that electroboom
I think you should make a Marx Generator. The arcs would be massive this way. You really shoud do it! By the way, great video as always.(Sorry if my English is bad, I'm acutally Turkish, and I'm trying to improve my English with watching English UA-cam videos of you and the other Electronics channels.)
you're doing well!
ama emin A-coo-tuh-ly aslında ak-choo-aly.
Anthony G Sorry but I can't understand you
Anthony G I think you tried to speak Turkish but I can say It is not Turkish(except for the words emin and aslında)
4:54........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... you are a very hairy man.
Sir you're literally one of the best intellectual comedian 😂 and a genius who let's us fools learn so much without actually opening a book