Looks good but how has the nominal voltage worked out for you since 18650 li-ion cells are only 4.2v at full charge but nominal is only 3.6 volt that's only 10.8 for that 3s battery ? I have had to go 4s to 16.8 volts then the nominal voltage is a manageable14.4 volts , my use is ham radio and my radio can handle that voltage but for an inverter not sure which one can take that high of voltage that's why we go to 24 volt li-ion battery and 24 volt inverters .
When it comes to old cell or reused cell , it's always better to use a nickel wire instead of a nickel strip. As there might be some cells getting bad down-the-line and it will not effect the remaining cell in parallel.
nice video brother , can you tell me what charger do you use , im planing to make 3s battery pack for my electric boat motor , want to be around 120-40 amps and i wondering what kind of charger can i buy ... will be super if you advice me thank you
Good evening, I made a 48 volt battery, but after a full charge it does not exceed 51 volts. What is the problem? Thank you, my friend. I follow you from Egypt
I get mine for free from a local computer repair shop. They used to have to pay to have them recycled. Now they but them in a box and I go pick them up about once a month. Been doing this for about a year now and have gotten around 400 good cells for free. Rejects get taken in to Battery's+ for recycling (at no cost to me).
I get mine for free from a local computer repair shop. They used to have to pay to have them recycled. Now they but them in a box and I go pick them up about once a month. Been doing this for about a year now and have gotten around 400 good cells for free. Rejects get taken in to Battery's+ for recycling (at no cost to me).
Hello bro. I like your video so much the i literally watched it a 50 time a day. For no reason. One dought how much did the old laptop battery cost.. and how may did you get and from where. I k ow it is to many questions but still. Need help .. Thank you.
@MakerMan and the better 18650s can go above 3000mah or 3ah, but be prepared to $$. generally they are around 2000mah. connect 4 cells (3.2vx4) in parallel to achieve one 12v battery. 1000mah=1ah 2000mah=2ah 2200mah=2.2ah....decimals game
Thanks The wiring diagram ae01.alicdn.com/kf/HTB1XpIqacTxK1Rjy0Fgq6yovpXap/3S-100A-BMS-12V-16-8V-21V-100A-Li-ion-LMO-Ternary-Lithium-Battery-Protection-Circuit.jpg_Q90.jpg_.webp
@@MakerMan thats good cause it csn be baaad but good job really nice one i have 150cells and just charging in separate charger and discharge 1 in a time with imax b6 1cell discharges in 3h thinking to get second charger discharger with 4cells at least
Hello everything looks good and great but you know that 18650 and other cells are not soldered but spot welded because the film is made of plastic where the lithium and cobalt is steamed on it, this can cause damage and if the cells have a pressure relief valve automatically by a hiss degas or even burst.
Why Switch to Lithium? Longer Life, No Maintenance, and Faster Charging are just a few of the advantages lithium has over lead-acid batteries. Making it an exceptional return on your investment for years to come. SERVICE LIFE: Lithium-ion batteries last 3-4 times longer than lead-acid batteries without losing effectiveness over time. #lithiumbattery #leadacidbatteries #batteries #maintenance #investment
Dude, I have to tell you. I couldn't learn a thing from your extremely high speed playback. I almost wanted to puke. You have a lot pf good information in your video. Just slow it down when you start a scene so people can absorb what you just showed them. I look forward to your next video.
Hi Matt. Sorry for the way you feel about this video. It's a bit challenging to cramp 2weeks project in to less than 10mins. I want to show all the process of the project in one go, I could make in longer video or make many part video. Then 90% of the veiwers would get pissed for that. So I decided, I will make the video like a quick montage and later if someone one has any questions, I am here to help. Just tell me what & where didn't you understand. Hope this reply finds you well. V -- MakerMan
@@MakerMan Thanks for the response. I did enjoy the content. I was interested in the gauge of copper and the leads from the cells etc. I'm an older guy and things take a little longer to be absorbed into the grey matter. Keep em coming.
Looks like a good and safe build with all 18650 cells fused 🙂👍
Thanks buddy
This has been the best and most complete video I have ever seen. Thanks a lot
This is so satisfying to watch
6:40 which one is negative/positive you dont give caption,
it would also be appropriate to sort according to internal resistance.
Can we make 100ah battery like this one and replace with inverter tubular 100ah battery?
Same question
Yes
What's the fuse ratings
How match cell i need to build a 12v 38ah battrie for a electric weelcher pls inlight me and thx for advence
I didnt see any solder on battery terminals. I'm confused on how they're connected. Please enlighten me
Omg I really love that wall system you have for charging and testing your cells. Do you have a diy video of that?
Yes I have made videos on that too.
@@MakerMan bro can you answer my question
Sure
I need this cell holder can you tell me about cell holders information
Charginh kay liya kitna amphere charger ka istemale kiya ho is 12v 70amphere battery ko charge karne kay liya
Love you content Bro... your explanation and efforts are on next level... Love from india
Thanks buddy, glad you liked it.
Hi, great content, what is this spot welder that u use in this video?
Do these have good life cycles if we use them on solar inverter?plz guide
Yes
Sir
Hame kharedana Ho to kya prize lage ga or battery life kitani hogi
Looks good but how has the nominal voltage worked out for you since 18650 li-ion cells are only 4.2v at full charge but nominal is only 3.6 volt that's only 10.8 for that 3s battery ? I have had to go 4s to 16.8 volts then the nominal voltage is a manageable14.4 volts , my use is ham radio and my radio can handle that voltage but for an inverter not sure which one can take that high of voltage that's why we go to 24 volt li-ion battery and 24 volt inverters .
Food job brother..
Thanks
Good morning
why not use nickel strips per point and put a bms? That would be easier, right?
THANKS
When it comes to old cell or reused cell , it's always better to use a nickel wire instead of a nickel strip. As there might be some cells getting bad down-the-line and it will not effect the remaining cell in parallel.
Can I get a link on where to buy the batteries and accessories? Thanks
I got my battery from the local scrap yard.
Hi where did you buy the BMS from? any link to share?
AliExpress
Отличная работа
nice video brother , can you tell me what charger do you use , im planing to make 3s battery pack for my electric boat motor , want to be around 120-40 amps and i wondering what kind of charger can i buy ... will be super if you advice me thank you
@Miles Jerry can you post a link
12 volt 70 ah kitne rupaye lagte Hain bol dijiye
Watched, liked and subscribed. Great video and workflow! thank you for sharing!
Thanks buddy glad to hear that.
Hola porfa tienes el vídeo de como hacer el cargador para las baterías 18650?
Sir pls reply bms name pls
Sir can we use this for supplying 12v fish shocker for electric fishing?
Yes
But water proof it. :)
@@MakerMan thanks sir.
Good evening, I made a 48 volt battery, but after a full charge it does not exceed 51 volts. What is the problem? Thank you, my friend. I follow you from Egypt
Are you sure you can follow him all the way from Egypt?
What you get kwh ,12v system solar ?
What is that application you used?
Bms model and where buy
You do nice work. Thanks for the helpful video!
Thanks buddy
Thanks for the Video. What Software do you use to calculate where to put the Cells in? Packer?
Repakr.com
@@MakerMan Thx. Unfortunately the website is down :(
@@MakerMan oh ok. it is www.repackr.com/
www.repackr.com/#/pack-builder
Try this
It was really good
I learn alot
Love it and have subscribed
Thanks glad you liked it.
I am planning to make a bigger one. 100ah
@@MakerMan can't wait for it. Please also add schematics on the future video.
Sure
70amh banane ke liye kitani pice battery lage gi or kitane amh ki PCB lagaye
Where did you buy batteries
I bought from my local scrap yard
Good job 👍
Testing cell power value ???
Old laptop battery 😱😱😱
Yes
Where did you get all those old laptop batteries from?
Local scrap yard
I get mine for free from a local computer repair shop. They used to have to pay to have them recycled. Now they but them in a box and I go pick them up about once a month. Been doing this for about a year now and have gotten around 400 good cells for free. Rejects get taken in to Battery's+ for recycling (at no cost to me).
I get mine for free from a local computer repair shop. They used to have to pay to have them recycled. Now they but them in a box and I go pick them up about once a month. Been doing this for about a year now and have gotten around 400 good cells for free. Rejects get taken in to Battery's+ for recycling (at no cost to me).
Thanks you so much that i uses all my lithium ion cell safely.
One question how much did you pay for the laptop battery.
Hello bro.
I like your video so much the i literally watched it a 50 time a day. For no reason.
One dought how much did the old laptop battery cost.. and how may did you get and from where.
I k ow it is to many questions but still.
Need help ..
Thank you.
Nice work. One question, what charger do you use to charge it ? How many ah ?
You can use any bench power supply for example.
If each 18650 battery has C rating of 1 can you increase the c rating of the entire pack by combining them?
Yes
@@MakerMan How is this done? Does it matter if they are in series or parallel?
Only in parallel.
@@MakerMan Amazing!
PCB kaha se buy kare plz link de do kitane volt & amp ki le
Brapa volt batas baterai saat dilakukan discharging pada alat ukur kapasitas????
Loss .. why don't you use the 100ah BMS?
12v, 3s?
hello great please how big is the bus bars? 0.5mm²? 1mm²?
why 3 threads on the minus and the plus?
thank you so much👍
I believe it was 1.2 or 1.5,
I will email you the grabber file some, it is on my home PC, and I am away for work for a few days.
@@MakerMan thank you very much you must have a lot of messages for your work and your youtube channel is at the top
Bro love your video. You deserved a sub👍
Thanks buddy
Plz iska circuit diagram bta dijiye 🙏
How many hours it will run 3 tube lights (3*20=60w) 1 fan,
1 hour
Hello my frend
I would be interested in the PCB. Where can it be purchased? If you have for sale I am interested, With respect Nicu
Very innovative
Thanks
Sir what is the cost of 12v 72ah battery pack if I will purchase it from you !
Email me please
@@MakerMan I’m interested too ! In a 100 ah one Where is your email lol
anna one dought , can i know from where you got the batterys. because i want to bulid one for my house.
pl contact no.. to contact you.
Nice
What BMS did you use?
3s 100amp BMS
12v70ah battery pack for sale? Rate? For grade B
Hi Makerman ,great build where did you get the large led panel from?
Camping supply shop
Konsa BMS lagaya hai bhai..
100A 3s 12v
BMS from AliExpress
смотрю все делают без корпуса АКБ , давайте видео с коробкой для аккумулятора . Лайк
How do you charge this thing?
I use my solar system
what is a MAH of 1 cell
Around 1800 to 2100 mah.
@MakerMan and the better 18650s can go above 3000mah or 3ah, but be prepared to $$. generally they are around 2000mah. connect 4 cells (3.2vx4) in parallel to achieve one 12v battery. 1000mah=1ah 2000mah=2ah 2200mah=2.2ah....decimals game
Is it 3S or 4S?
3s
Grade B 18650 cell for sale? Rate please
Where did the pack builder come from?
U mean the cell packer.
I want the software to divide the battery capacity like yours.
Here u go.
www.repackr.com/
Thank you very much. I am Vietnamese, really want to learn from you
Always here to help.
How can you get this laptop battery
Check ur location scrap yard
How many watt in this Bettery pack
800 watt-hour
Your the man... Subs for you.. may you can provide me if you don't mind a copy of schematic diagram.. thank you..
Thanks
The wiring diagram
ae01.alicdn.com/kf/HTB1XpIqacTxK1Rjy0Fgq6yovpXap/3S-100A-BMS-12V-16-8V-21V-100A-Li-ion-LMO-Ternary-Lithium-Battery-Protection-Circuit.jpg_Q90.jpg_.webp
I want this battery
How ????
Price????
plz tell me how much amps u using and how long its charging? @@ plz @@
Changing time depends on your chargers amps.
@@MakerMan and what kind u using? no one not tells me 1a...40a...60a?...
Where do you get that fuse wire?
eBay
Hi. Can You tell me somethings about your guillotine to batteries ?
Good
Thanks buddy
Wow
Thanks
I wanted to know how much you do this for me
Bro bms name please ❤😂🎉
Cooooolllll
Thanks
How many batteries
108
@@MakerMan how much each were the batteries?
I got each laptop battery pack for around 0.5$ here at a local scrap yard. Each laptop has 6 or more cells.
@MakerMan that's cheap. I am in England and they are expensive
See if your friends and family have some old laptop batteries or power tool batteries. That would be an option.
Bhai aapane connection to kar diya lekin aapane Bataye Nahin
there was one cell that was turned to + then all pack was - hope he so all
All fine I have recheck, maybe behind the scene.
@@MakerMan thats good cause it csn be baaad but good job really nice one i have 150cells and just charging in separate charger and discharge 1 in a time with imax b6 1cell discharges in 3h thinking to get second charger discharger with 4cells at least
Hello everything looks good and great but you know that 18650 and other cells are not soldered but spot welded because the film is made of plastic where the lithium and cobalt is steamed on it, this can cause damage and if the cells have a pressure relief valve automatically by a hiss degas or even burst.
Why Switch to Lithium?
Longer Life, No Maintenance, and Faster Charging are just a few of the advantages lithium has over lead-acid batteries. Making it an exceptional return on your investment for years to come.
SERVICE LIFE: Lithium-ion batteries last 3-4 times longer than lead-acid batteries without losing effectiveness over time. #lithiumbattery #leadacidbatteries #batteries #maintenance #investment
Yes
Would you be interested in sending out a unity for testing and reviewing.
I emailed to your sales team.
please tell us this BMS secrets 😌
It's a 100 amp BMS
@@MakerMan thanks sir 🙏🏻
Dangerous..pls use spot welding for battery welding..can fire lithium iron battery.
Este fabric ante Como que es mudo
Nice wn
Thanks
@@MakerMan bms model and where buy
100amp 3s BMS . From AliExpress
@@MakerMan how much maxium and minimum number of battery add
Depends on the cell amps
left pack midle
Hi maker man how are you?
Good
Dude, I have to tell you. I couldn't learn a thing from your extremely high speed playback. I almost wanted to puke. You have a lot pf good information in your video. Just slow it down when you start a scene so people can absorb what you just showed them. I look forward to your next video.
Hi Matt.
Sorry for the way you feel about this video.
It's a bit challenging to cramp 2weeks project in to less than 10mins.
I want to show all the process of the project in one go, I could make in longer video or make many part video.
Then 90% of the veiwers would get pissed for that.
So I decided, I will make the video like a quick montage and later if someone one has any questions, I am here to help. Just tell me what & where didn't you understand.
Hope this reply finds you well.
V
--
MakerMan
@@MakerMan Thanks for the response. I did enjoy the content. I was interested in the gauge of copper and the leads from the cells etc. I'm an older guy and things take a little longer to be absorbed into the grey matter. Keep em coming.
Copper busbar- 2mm
Fuse wire - 30awg
@@MakerMan Thank you for the info.
drop to .5 speed and mute plus he really did not have to show how he reclaimed all the batteries. one pack maybe but the rest was useless
Bro buy a battery
Y
Nice
I want this battery
How ????
Price????