3D Printed Robotic Turtle
Вставка
- Опубліковано 29 вер 2024
- This 3D print is of the Robotic Turtle designed by MatMire Makes. This print took right at 21 hours to complete and was printed to a size of 75% from the original. This is a well designed print and should hold up very well playing with it as all of the joints seem to be very sturdy.
The STL file is available at:
cults3d.com/en...
You should try using some 3d print bed adhesive to prevent parts from popping off the plate. I got a tube of Magigoo off Amazon for less than $20 and it works great so far.
If I took the time to find tune the Z axis it would work better. Guess I'm just lazy.
@@thegnewguy if you can manually tune the z offset on that printer you can do something called the paper test for a super quick and easy calibration. just get a standard sheet of printer paper and lower the Z-offset until you can move the paper and it just barely scrapes the nozzle.
@@frozenepsilon5295 I have a video on how to do that. My bed is level. I haven't cleaned it in over a year. Guess I'm just lazy.