For your next project mix pigment in Part 2 first. Don't use a power mixer as that reduces your working time tremendously. Use short nap roller. 2 coats maximum. Pour out whole container of mixed product to spread it out as fast as possible, the more you leave in the container by volume the faster it will get hot and start to kick. Never mix more then you can apply within 10 to 15 minutes.
Your company is the best I bought this because of him. The best thing I have to say is have a good sanded clean surface I also used Por-15 cleaner degreaser and Por-15 Metal prep. I used it for my 1973 Sears 14 foot Aluminum boat, I put 2 coats on.
I was in 5th grade when this album came out. They did a cover of the 70's song "Come on Feel the Noise" by British pop/rock group Slade. I saved my money and bought the Record. Other tunes on the album that I loved as a kid ... Run for Cover, Slick Black Cadillac ... great Album. Slade came out with an album not long after Quiet Riot hit with their song. Check out Runaway by Slade.
Thanks for making this video. I just picked up an old Bassway 1848 jon boat and am thinking about coating the bottom like you did. I already tightened the leaky rivets and am about to repaint the wood transom next.
Ok, I bought this for my 12' Jon boat. I mixed my colorant in part 2 first then added part1and mixed. Applied with roller and a plastic spreader. 2 coats and it came out great. I really appreciate your videos. My old boat looks new again. And no leaks
The corrosion pitting from the trailer bunks is usually caused by pressure treated boards. The chemicals react with the alum. Only the regular boards should be used.
Great job. if you would like to make the job go faster steel wire it , that works great. and remove all the stuff off the boat first, and mix the color in the pint and mix it up first it, then add the harder and finish mixing it. that will give you a little more time to work with.
@@Auntyweehaa great so far. Had it flipped over during the winter, I did notice that one area that the sun was beaming down on had chipped. I figure it was because of a little dirt so cleaned it, and reapplied. Hoping to get it out next month.
Thanks for the video as I'm about to do a 16/48 lowe aluminum boat. I want to do the entire outside of the boat. Going to have a buddy of mine sand blast it first. The thing is got to remind who ever does the sand blasting they need to remember you can NOT blast aluminum to hard or you will loose hull thickness as aluminum is very soft lol.
Before you put that on. Did you have any cracks were rivets are. I bought a Bass pro 15ft tracker jon boat in 2010 2012 plus I'm running a 15hp mercury 4stroke.i used boat to install boat lifts all over lakes in oklahoma so your talking about putting around. Well this year I'm not installing lifts.in tje years ive owned this boat ive put flex seal paint bottom & inside jb weld on a crack it held for a little bit. Now I'm scraping the flex off the bottom cause it's flaking away ive noticed around rivets thier is cracks oh ya also a weld in the seam has a big --- crack about 8 10inches long. I guess bass pro is cheap on boats but they are exspinsive.im not sure how all this has happend to this boat from pushing lifts. I'm talking trolling speed.
Hey man do you remember what pigment color this was? Looks like a forest green almost. I'm looking to order some but I want more of an Olive Drab color..
So I just bought a jon boat we are currently stripping it down to paint it but I we did discover some leaking rivets would I be fine just covering them all with this to stop the leaking?? Also do I still have to Primer over the thing or should just paint over it?
like Bondo, if you want to slow the curing time just use less hardener. in addition, the chemical reaction will be much faster if you are mixing on a hot day.
If you do not use the correct amount of hardber it will not cure correctly, if you use to much it will over cure causing it to fail later .. yes temperature has a lot to do with it
Blake Sanders I just watched this today. I see you replied to Tim Commerford’s question about being out on the water a year ago. May we please have an update as to the status of your boat with a video of it on the water. In this video, you said something like you couldn’t believe someone hasn’t done a video like the one you were doing. Every video I watch about fixing Jon boats/aluminum boats, no one ever shows the boat out on the water to prove their handy work is what they claim it to be. I’m not hating. I’d just like to see if your method really works before I go ahead with your informative video. It was a great video
Damn no wonder that set up on you. You have to be the slowest person I've ever seen You didn't clean off your extra material before you started, wasted time! That stuff started setting up as soon as you mixed it
It is a long tested bottom coating epoxy paint. It is used for marine applications. It comes with a choice of pigments to add color. The cost per gallon is around $140 including four oz pigment. About the same price as any marine epoxy paint.
For your next project mix pigment in Part 2 first. Don't use a power mixer as that reduces your working time tremendously. Use short nap roller. 2 coats maximum. Pour out whole container of mixed product to spread it out as fast as possible, the more you leave in the container by volume the faster it will get hot and start to kick. Never mix more then you can apply within 10 to 15 minutes.
Fasco Epoxies well wish I would have known that,but it turned out great
Fasco Epoxies does this stop leaks?
Your company is the best I bought this because of him. The best thing I have to say is have a good sanded clean surface I also used Por-15 cleaner degreaser and Por-15 Metal prep. I used it for my 1973 Sears 14 foot Aluminum boat, I put 2 coats on.
Fasco Epoxies Hey can you please provide me with any tips on applying on a wooden hull?
[Get Schwifty] Has it lasted?
I was in 5th grade when this album came out. They did a cover of the 70's song "Come on Feel the Noise" by British pop/rock group Slade. I saved my money and bought the Record. Other tunes on the album that I loved as a kid ... Run for Cover, Slick Black Cadillac ... great Album. Slade came out with an album not long after Quiet Riot hit with their song. Check out Runaway by Slade.
Thanks for making this video. I just picked up an old Bassway 1848 jon boat and am thinking about coating the bottom like you did. I already tightened the leaky rivets and am about to repaint the wood transom next.
Awesome video. I'm fixing to do a 16ft smoker craft in this stuff. Hope it goes well. Thank you for this video
Ok, I bought this for my 12' Jon boat. I mixed my colorant in part 2 first then added part1and mixed. Applied with roller and a plastic spreader. 2 coats and it came out great. I really appreciate your videos. My old boat looks new again. And no leaks
What product did you use the same one?
Is that 2 coats with one batch or two separate coats on different days?
The corrosion pitting from the trailer bunks is usually caused by pressure treated boards. The chemicals react with the alum. Only the regular boards should be used.
This was applied two coats. One each day. Holding up great. Very please with results
Could you give us an update? Show the bottom and any gouges from hitting things or grounding.
Sorry I sold the boat,
Thanks for the video and warnings about the struggles you had.
Chris Baker yea it's a quick process
We use Steel Flex on our Airboat’s also a product called Frog Spit ( lol ) this stuff is great and hard as a rock, DO NOT USE A MIXER.
Great job. if you would like to make the job go faster steel wire it , that works great. and remove all the stuff off the boat first, and mix the color in the pint and mix it up first it, then add the harder and finish mixing it. that will give you a little more time to work with.
Thanks for doing this video I bought this last year for my boat.
hows it holding up?
@@Auntyweehaa great so far. Had it flipped over during the winter, I did notice that one area that the sun was beaming down on had chipped. I figure it was because of a little dirt so cleaned it, and reapplied. Hoping to get it out next month.
How did it turn out? Are you please? Any loose rivets or leaks
JUST WISH PEOPLE WOULD LEAVE ROOM FOR AN UPDATE HOW IT WORKED AFTER IT HITS THE WATER!
Sorry I sold the boat
Man l won't you to you ready helped me out and save me alot of money l didn't know about this inteal I saw this thanks alot
Glad I was able to help you!!
Thanks for the video as I'm about to do a 16/48 lowe aluminum boat. I want to do the entire outside of the boat. Going to have a buddy of mine sand blast it first. The thing is got to remind who ever does the sand blasting they need to remember you can NOT blast aluminum to hard or you will loose hull thickness as aluminum is very soft lol.
So how is the Jon boat holding up since you applied the sealant.
Sorry, its has been great I saw it a month ago and zero chipping, zero leaks
Before you put that on. Did you have any cracks were rivets are. I bought a Bass pro 15ft tracker jon boat in 2010 2012 plus I'm running a 15hp mercury 4stroke.i used boat to install boat lifts all over lakes in oklahoma so your talking about putting around. Well this year I'm not installing lifts.in tje years ive owned this boat ive put flex seal paint bottom & inside jb weld on a crack it held for a little bit. Now I'm scraping the flex off the bottom cause it's flaking away ive noticed around rivets thier is cracks oh ya also a weld in the seam has a big --- crack about 8 10inches long. I guess bass pro is cheap on boats but they are exspinsive.im not sure how all this has happend to this boat from pushing lifts. I'm talking trolling speed.
This was great! Thanks for posting it! Helped me with my Gheenoe restoration.
Awesome news. I'm in the middle of a Gheenoe refurb.
Good information to know
Hey man do you remember what pigment color this was? Looks like a forest green almost. I'm looking to order some but I want more of an Olive Drab color..
Where did you get it and how much was it very informative video
Just did that to my job boat did the water test no leaks I put 2 coats on I will see how it does on the water
How many qts did u use on your boat for the 2 coats?
@@hectormacias5395 so I have a 10ft 48 I used 2 quarts
Thankyou brother
What size is your jon boat?
I watch your video and did every thing you did except adding paint is this why it harden up real fast?
No, probably mixed to long of a time.. it dose not take long to harden,
So how did it turn out/did you need another coating?
im doing mine do think it will still stick to a primed jon boat
whats wrong with a paint brush?
Is it durable for beaching a boat?
Hei Blake, how bout some update on your steelflex 2000. really curious hows that turn out so far. Thanks in advance
marty4619 it's has healed up perfect.. love it
Could I use this on aluminum???
The boat is aluminum 🐡
What products did u use and where can i get them
Would this product be good to paint on a fiberglass water trough for a water fall ?
Looks great, I have a 14 foot by 36. Do you think 3 pints will be enough for mine? Is the stuff expensive?
Yes absolutely
Hey buddy put up an update. Thx
What product is this exactly? , there are a lot on the site , thanks
What size boat was this?
14/36
So I just bought a jon boat we are currently stripping it down to paint it but I we did discover some leaking rivets would I be fine just covering them all with this to stop the leaking?? Also do I still have to Primer over the thing or should just paint over it?
I'm doing the same. No primer. Remove all the paint. Sand down with 24 grits. I even sanded down old jb weld. Clean. Apply
Next one he is going to sand blast it , wow I want to see that.
I am going to do another one soon make sure to subscribe
Can I. Add a layer of poly eurethane over the flex seal? Or is it unnecessary?
Not needed once it cures it would not stick due to the Teflon coating
Hey what color did you choose? Just the basic “green”?
Yes od green
Thanks. They have a green and then a dark green
How has the steel flex handlled long term ?
No longer have boat but lasted a long time
What was the name of the product
Will it stop leaks?
Yes
like Bondo, if you want to slow the curing time just use less hardener. in addition, the chemical reaction will be much faster if you are mixing on a hot day.
If you do not use the correct amount of hardber it will not cure correctly, if you use to much it will over cure causing it to fail later .. yes temperature has a lot to do with it
@@Samuria87 it will cure perfectly if you drop the hardener 10-20% if you’re not in a hurry.
can u use it on your boat if its already painted on the bottom?
yes just prep correctly
where did you purchese the steel flex
fascoepoxies.com
What kinda of roller is that?
Just a NAP roller from lowes.. nothing special
@@Samuria87 Thanks.
I heard to use lintless. I'm about to do my boat is why I'm asking.
what is a pient?
Looks good , how did it seal up
Really well
Where can I order stuff and what does it run
How did boat work out on the water. No leaks?
Tim Commerford lol it's still in the garage.. I have been busy. hope to have it next month
Blake Sanders I just watched this today. I see you replied to Tim Commerford’s question about being out on the water a year ago. May we please have an update as to the status of your boat with a video of it on the water. In this video, you said something like you couldn’t believe someone hasn’t done a video like the one you were doing. Every video I watch about fixing Jon boats/aluminum boats, no one ever shows the boat out on the water to prove their handy work is what they claim it to be. I’m not hating. I’d just like to see if your method really works before I go ahead with your informative video. It was a great video
How is it holding up and is there any concerns with this product?
Anthony Hernandez holds up perfect
Nice job
Were do you get it
"Fasco 9XN2000 Super Slick Epoxy Bottom Coating" fascoepoxies.com/Fasco-9xn-2000-Super-Slick-Epoxy-Bottom-Coating.html
Or Amazon
Were the two pints of steal flex enough for you Jon boat?
He said he used 2 pints but had a 3rd to thicken up the thin spots 🤙🏻
let out a sneaky fart out at 21:12 lol
No lol
@@Samuria87 lol no one well know
How much would I need for a 16ft boat?
one gallon
Any body else want to move the drill ? Thanks for good ideas 💡
Move the drill?
You said 30 SF and later said 30 SY. Which is it?
How much did you have to use to coat the entire hull well? 1 quart or did it take 2?
Sean Behnke took 3 quarts
update?
nice video men thank you men
Great video! Thanks!
Thanks for video.
Guess Who your welcome
Enjoyed the sh=t outta this video. Thanks.
Nice bro
Did this help prevent noise from hull slap?
Brad yes on my other boat it did
Yes it helped
With All that flex seal & jb weld it still leaked
nope
Damn no wonder that set up on you. You have to be the slowest person I've ever seen
You didn't clean off your extra material before you started, wasted time! That stuff started setting up as soon as you mixed it
I'm needing some help
A little on the job education, "how to" video.
what does that shit do?
It is a long tested bottom coating epoxy paint. It is used for marine applications. It comes with a choice of pigments to add color. The cost per gallon is around $140 including four oz pigment. About the same price as any marine epoxy paint.
You sound like its a real chore to get your Jon ready, personally, I don't want to watch you paint your boat for 20 minutes
well go and get on top of your daughter for 20 mins....u should be excited now...he did a good job !!!! cant wait till funky trump build that wall
You said 30 SF and later said 30 SY. Which is it?