Super Slick Bottom Paint on a Jonboat (Swamp N Stomp ep. #64)
Вставка
- Опубліковано 14 жов 2024
- In this DIY video, Mark applies the Fasco Super Slick epoxy bottom paint to his Lowe 1236 Jonboat. As you can see at the end, this bottom paint makes it glide over even some of the sketchier obstacles.
.
.
.
.
.
Follow us on Instagram:
/ swampnstomp18
/ swampnstompdanny
/ swampnstomp_mark
Swamp N Stomp is a channel or vlog, whatever you want to call it, dedicated to helping the hunting community grow, specifically in Florida. Studies show that the majority of modern hunters had family members who raised them as hunters, and a large portion of non-hunters want to hunt but don't know where to start. By documenting our hunting adventures, making instructional or tutorial videos, and really anything-hunting-related videos, we hope to help bridge that gap by providing practical information for beginner and experienced hunters on how to become a better and more ethical hunter. Click that subscribe button and join us for the ride! Thanks for watching!
Disclaimer: Swamp N Stomp LLC and it's constituents are not responsible for any accidents, injury, or legal ramifications that result from your actions. The information presented in these videos are based on personal preference, should you choose to adopt methods presented in these videos, the responsibility for that decision falls on you. Furthermore, it is important to stay up to date with rules and regulations that apply to you and the land you hunt on. Be safe, stay diligent, and good luck in the woods!
i’m thinking of putting in a coat on the bottom of my Jon boat , which I grinded down to bare aluminum, but I was also thinking of maybe putting a coat on the inside bottom, which has a coat of paint my question is, do you think if I just scratch that paint with 80 grit will the steel flex will that adhere to it or do I need to take that down to bare aluminum also?
I wouldn’t worry about paiting the inside. It’s not affecting the performance of your boat, and aluminum can’t rust so what’s the point? Seems like a lot of work for nothing. Steel flex requires adherence to bare metal. -Mark
I wouldn’t want the inside of my boat being slicker than a minnow’s peter. It’s an accident waiting to happen.
Does the pigment come with the kit? Or did you have to buy that separately?
You pick the color you want and buy it separately for a few bucks. -Danny
Was there any leaks in the boat before and if there was did it seal 5hem up afterwards?
No there wasn’t. If it’s a small leak I think it would do fine but if it’s a crack I would fix it before applying. -Mark
looking good . i read the comments . it seems like it is holding up . good job.
You think one pint is good enough or 2 is better i have a 12ft also thinking of doing it too
It was more than enough. There no benefit to do it thicker and you can’t layer it anyway
What kinda roller did you use?
What roller did you use?
What’s it look like now ?? How’s it holding up ??
I’ve run it into a lot of stumps and rocks. The rocks will scratch it a bit but for the most part it’s all there and still super slick. It’s worth the time and money!
@@SwampNStomp cool !! I wasn’t sure if spending the money difference between it and the Gator Glide stuff would make a difference, Thanks !!
Crap did I screw up I sanded my boat and primed it should of not did the primer ?
Probably not. But it’s done now...
How is the Super Slick 2000 Epoxy Bottom Coating holding up?
I have drove over some pretty stupid things and the super slick doesn’t care... I have another video where I do a speed test and you can see me drive it over a log that basically took the whole boat out of the water. Not a scratch! Thanks for watching, don’t forget to subscribe! -mark
@@SwampNStomp can u send me a gallon for me boat I need address of this so I can order rhanks
How is it holding up? I literally just bought a 12' project jon boat to turn into a mud boat 3 days ago. I was researching bottom coats and saw this.
It’s holding up great... except I got a big scratch it where I ran over some rocks... don’t run over rocks! -Mark
Need that for mine,
If yiu have a girlfriend that will help you do that kinda stuff, better keep hee and put a ring on her.
Dumped her ass and found a better one 😅
How slick is it? Have can you push it off the trailer or on flat ground? I’m trying to decide between this stuff and gator glide. Thanks in advance for the input
Yea you can push it right off the trailer. It’s slick!
hi, what outboard is that? i see them alot in SE asia, but rarely in the US
It’s called a long tail or a mud motor. You can buy the kit from Swamp Runner and fit whatever motor you like to it. Personally I have a 13hp predator motor from harbor freight. - Mark
How much did you use and how big is your boat ? Gonna order some for my 15ft boat and don’t want to over order haha
How much you end up using I bought the 2 pints kinda wish I would’ve got gallon
Is that south Florida?
No it was Alachua county!
Man that was a good video. That was cool watching You do that work. You did a very good job man. It was also awesome to watch you do it in flip flops. The flip flops is the only Footwear that I can wear because i have big very very wide feet sz15 6 EEEEEE wide with very very fat wide toe that are equally straight across making my foot 6 1/2 inches wide from my big toe to the lil toes. my foot out grew tennis shoes 33 years ago so there's no shoes , sock , or boot that's wide enough for my foot. The flip-flops is the only thing that were barely and I mean barely fit my foot because my toes are wider than the flip-flop straps. It really really sucks having a very very extremely wide foot that is 6 1/2 inches wide with very very fat wide toe that are straight across. I wish my toes were at a 45 degree angle like everybody else toes that way my foot would not be so wide. I also like your tattoos man those are awesome. Great video man thank you for sharing.
Wtf