If you did all of this but system info still says disabled you may need to ENBLE FACTORY KEYS under secure boot > custom in your BIOS, other than that - bang on thx dude
@@blasesux it finally worked, I had to deactivate it, reboot, then activate it but in custom mode and after that activating a product key or something it finally worked.
Thank you for the video. For some reason, when I switched the boot to secure and pressed F10 and went back into windows, my system information still said Secure Boot State was off. Fixed the issue like some others by going back into the bios menu, changed secure boot to disabled and an option that said ‘standard’ to ‘custom’. Restarted the pc and let it load windows fully, went back into the bios again and switched it all back to standard and enabled secure boot. No idea why that had to be done but it worked.
For anyone who is still stuck, when you change the option from custom to standard, click "yes" when it asks to load factory defaults and then click "no" when it asks if you want to exit without saving. Do that and it should boot with secure boot on.
@@RollwithPunch Hey man, I know you're not an IT helpline, I followed the steps and done the conversions in the command prompt I'm now met with a screen that says. "an operating system wasn't found. try disconnecting any drives that don't contain an operating system. press ctrl-alt-del to restart" I'm left with a black screen and I cannot do anything I can never get to the BIOS but I have no idea of what settings I need to be able to change, is my main work computer I'm unable to do anything so if you have any solutions it would help me out I'll be very grateful
So glad to have found this video - AMD, two settings in BIOS, and done -- after an hour of googling and watching videos that didn't have the whole story. I don't get why this information was so hard to find. Would love to buy you a coffee if I could.
Thank you so much! I've been frustrated for so long trying to get my system upgraded to windows 11. Your very clear and thorough tutorial was just what I needed to find the missing piece (converting MBR to GBT).
cause your changing the setting in setup mode not in user mode, how i do it is i change the secure boot mode to custom and then back to standard. and then the system mode will say "user" instead of "setup", then disable secure boot and then enable it again. hope this helps
You know, I just went into this video wondering why it's 11 minutes for just enabling secure boot.... and I noticed it's because it's a super basic guide for even the people who has never seen the BIOS screen. Especially loved the way you entered BIOS via recovery restart rather than telling people to spam DEL/F12 :D
6:05 Secure boot appears when disabling CSM support!!! Thanks a million for this discovery! Completely odd logic in the Asus bios setup, but you nailed it. Thanks a million for this discovery!
Thanks so much, it worked. For people who have Secure boot state still showing off even after enabling the secure boot in BIOS, you might try go into BIOS > Security Tab > Secure Boot Mode - Custom > Key Management > Restore Factory Keys > Save & Exit. (Refer to 6:40 for the security tab)
Thank you for helping share this, additionally we have since released a video that covers this topic: ua-cam.com/video/I65j7U6mMDw/v-deo.html&lc=Ugx8OfTsxeSGR7NBmo54AaABAg
You can check the partition style from CMD in recovery mode: diskpart and hit enter then type list disk to show all connected drives. Note the disk number of the one you want to check. In the disk details, in the GPT column if there is * (asterisk) then it means the partition scheme is 'GPT', and if there is no * then it means the partition scheme/style is 'MBR'. Then if you get a message like: MBR2GPT: Attempting to convert disk -1 MBR2GPT: Retrieving layout of disk Failed to retrieve geometry for disk -1 Just type the number of the disk that the disk part utility gave you. For me it looked like mbr2gpt /disk:0 /validate and then mbr2gpt /disk:0 /convert. Worked like a charm! Awesome video!!!
Thank you so much. I've been trying to solve the blue screen problem after enabling the TPM and secure boot. Many videos about the topic but nobody knows what they do. All of them copy each other. The real issue was the partition style. I've followed you and converted the MBR partition style to GPT style and enabled what I need and it is done.
PSA: for anyone getting a validation error after doing the mbr2gpt /validation. I had to go into disk management and assign my partition a drive letter. This fixed the issue for me.
I tried this method and in the command promt when i typed in the command it said that "Disk layout validation failed for disk". What can I do in this situation? Thanks for the help
Unfortunately if it is not working your likely best solution to ensure you don't have problems in the future is to do a clean install. If you would like to watch out guide you can visit here: ua-cam.com/video/QU2LlQPeQdI/v-deo.html
Had the same problem. Had more than 3 particion on that drive. That was the reason it failed. Emtied a particion, expanded windows partition and it worked
When i try the command prompt section for validating the mbr2gpt its says "Disk layout validation failed for disk 0" could you help me with this failure?
I tried this a while back and couldn't get secure boot to load my windows drive. Turns out it needed converting and this is the first I've seen about it. Thought I was having issues with bios problems as my drives would no longer show. Just wanted to say thank you for a fantastic guide. Saved me so much time and frustration.
Thank you! I had hair until I ran into this problem. Your video was way more helpful than the two sentences in the Gigabyte mother manual: Secure Boot Allows you to enable or disable Secure Boot and configure related settings. This item is configurable only when CSM Support is set to Disabled.
If you can’t find ‘Secure Boot’ option under BIOS on intel Gigabyte, make sure the ‘CSM’ is disabled, reboot and then go to BIOS again straight away. It will be there. Thank you so much man, much appreciated!
No joke, i spent about 3 to 4 hours and this video saved my sanity. I haven't had to deal with Windows 11 but im familiar with installing other versions of Windows. My issue was that when enabling fTPM and secure boot i would not only be unable to boot into windows but couldn't even see my boot devices. Long story short i didn't have my drive using GPT. I did have a secondary issue in the bios that caused me to not see TPM 2.0 in windows. Theres a option under TPM 2.0 to hide it from the OS. Thanks for your video
OMG THANKS YOU SO MUCH !!!! I CAN FINALLY INSTALL WINDOWS 11 !!!! I couldn't just because of Secure boot that was (when enable) not booting windows and redirecting me in the BIOS options. BUT ITS NOW FIXED THANK YOU SO MUCH YOU ARE A LIFE SAVER !!!!
Awesome, clear and concise. Saved me from buying a TPM module lol. I had no idea it was already on my motherboard. You’ve gotten my like and subscription Thanks for the video!
I was stuck booting into the bios when I first tried to enable secure boot. Seems all I had to do was change the format of the SSD 😭 you have saved me so much time and money 💪
@@revengexd__ honestly, I think it’s just a lot of trial and error. Be patient and come back to it with a fresh brain. I’m sure you’ll have it done in no time :)
Thank you so much for the tip, I will give you a shoutout in the next video!
2 роки тому+10
Thank you very much for this detailed and easy to follow instructions vídeo! I was able to finally activate secure boot in my AMD board. Keep up the good work!
Hello, so I have enabled tpm but when I go into the secure boot option and enable it, under it it says not active and it won’t let me click on it, after finishing and saving I do the system info thing and look at the secure boot option and it says off. Also for some reason my mouse got a little bit of lag. Please help, I’m very bored and the game I want to play needs this… I think
@@noadoesnotpost For everyone Having the same issue, Yes, there is a fix. Basically in the bios, in the boot tab, at the very bottom, there's an option called Preferred Operating Mode, and by default, it should be set to Auto. Change it and mess around with each option, because I don't remember any of the options (I think one might be called Custom if so, select that and try to activate secure boot) because this was a while ago, but yeah, pretty weird way to have bios set up in my opinion, but what can you do?
After I clicked ok when it said “secure boot can be enabled when system is in user mode. Repeat operation after enrolling platform” it still said disabled
Hello I tried to enable the secure boot in gigabyte but said "secure boot can be enabled when System in User Mode. Repeat operation after enrolling Platform Key(PK)" pls help!
@@RollwithPunch On my gigabyte bios if Secure boot says Enable it wont show ON on Windows System Information. To have it ON in Windows, Secure Boot needs to be set to "Enable" AND "Active" otherwise it wont show ON in Windows. Don't know why ?
I did everything you said and I enabled my secure boot but when I look in the system information it says "Secure Boot State Off" after I enabled it can you help me please 🙏
@@RollwithPunch Same issue as well. Secure boot in system info is still off. I tried windows update and also flashed the latest BIOS update for my board (f36c update for aorus x570 xtreme 1.1).
I converted my boot drive to GPT successfully. I also enable Secure boot in my BIOS. However, the state of secure boot is "Not Active" even though it's enabled. Same if I turn on TPM in the BIOS. Which if I do that, I get a blue screen upon boot. How do you fix this? I should mention that it is an AMD based system. Gigabyte motherboard fully updated BIOS.
It may be an issue with my TPM device. I recently upgraded my motherboard. Still a Gigabyte but an X570s board. Got a new M.2 drive, created the GPT partition no problem and formated. I successfully installed Win 11 with everything turned on. Seems to be working fine now. I can only determine that the module was faulty.
Thank you! After watching many videos talking about the same thing, the problem was in the SSD format. Changed to gpt and W11 installed. You have a new subscriber!
Thank you so much for this video. I had everything ready to go except my master boot record converted to GPT. I didn't know anything about that and couldn't find anything about enabling secure boot. That was my only hang up. Thanks to your video, it identified my issue and once I converted my MBR to GPT, Windows Health Check said I was good to go. Unfortunately Windows Update said otherwise. However after Googling it, I found the commands to run in command prompt in administrator mode that fast tracks windows update to finally allowing Windows 11 to be installed. I'm installing it as we speak. Thank you thank you thank you!
Great video and didactic clarity - as well as amazing attention with your second video on how to enable secure boot through factory key reset. Gained a follower!
After turning on secure boot with my AMD processor and Gigabyte motherboard, my pc wont boot fully and cycles between VGA,CPU, and DRAM LEDs on the motherboard
That conversion guide helped thankfully for me it was just the formatting that was the issue but sadly it's different for everybody and this my friend is the best guide I've seen
@@BradenPearce14 I did some googling and was able to solve it, I don't quite remember what I did, but a few quick googles can help. I think I reset to factory keys and then tried again
I watched your 3 videos on the topic and would like to share that you have earned my Subscription. Today disabled CSM due to other issues and shortly after found out that I shouldn't have done that without checking the disk format (thankfully it is GPT) and the TPM (Thankfully I somehow have it enabled and active) - so now I only need to enter the BIOS and Enable Secure Boot the way you showed in these 3 videos. Thank you.
Thank you for this video. It helped a lot :) For those who cannot find secure boot on B250M-Gaming 3, try changing the Windows 8/10 features from Other OS to Windows 8/10. Activate attempt secure boot, then set the secure boot mode to Standard.
In windows it says that my bios mode is uefi but when I go into the msi settings it shows my bios mode is still csm so it won’t let me turn on secure boot can anyone help with this
Hey man, followed everything in your video, but my secure boot keeps showing off, don't get why this is happening, if you have any suggestions that would be great, fantastic video as well
I am getting a failed validation when in command prompt and therefore can't convert to gpt. Does this have to do with with having multiple hard drives?
Great video, but I have a problem. When I go into 'Advanced Options' , I don't have a 'UEFI Firmware Settings' menu to enter. My motherboard is an Intel based Z97X-Gaming 3, manufactured in 2014. Any help would be greatly appreciated. Thanks!
You can skip a few steps in Disk Management. Instead of going through a couple layers to get to the disk's properties you can get their directly. Find the (C:) drive, but instead of right clicking on it, go to the very beginning of the same row, right click where it says "Disk N" (where "N" is the disk number) and then select properties.
Thanks man. Just wonderfully, in-detailed explain every bit of step, moves. thank you so much. i was tired searching for this secure boot option, but no one on earth mentioned that CSM enabled lead to no secure boot. you just made my day sir.
tysm, u are a life saver, i literally looked in every option and couldnt find it, i was sure that the secure boot option was hiding somewhere greetings from romania!
Any idea how to fix this? "Disk layout validation failed for disk 1" ?? Thanks... P.S. I'm doing all this so as to "upgrade" to Windows 11 - I assume GPT is neccessary?
Thank you so much 😂 everywhere it says "just enable secure boot" but I didnt know where to find it, glad someone just showed me exactly what to do, love ya dude
I also don't usually comment but the first part of your video (changing your Hard drive from MBR to GPT) should come with a warning... Noobs like myself did not know about the partition failure!! When you transition a drive, if the drive has partitions for recovery, buffer, etc; the. The conversion process will spit out a complete AND an error message of "cannot find winRE"??!! This is because the conversion erased the partitions and then It doesn't know how to restore them without winRE... This is all well and cool if you have win Recovery on a disc/USB, but I upgraded to win 10 from previous windows through the windows assistant. Either way, it is a good video. Just needs a warning for the MBR/GPT for noobs
This is great, worked for me after researching and trying so many different options. It was pretty straightforward so a big thank you and Kudos to you.
I want to thank you so much for this tutorial. Please everyone do exactly what he said and don't half ass the process. I couldn't get my pc to go back into windows and after watching the video from the beginning i realized I messed up and now it works. Thank you for a very detailed video on this .a++++++
If you did all of this but system info still says disabled you may need to ENBLE FACTORY KEYS under secure boot > custom in your BIOS, other than that - bang on thx dude
Thank u!
This worked, thank you
Thanks man
Legend
Thankyou! This is what I needed lol
Anyone else do this just to play valorant? 💀
Did this work for u? Bc it says mine is enabled but valorant says it isnt
@@JavierGonzalez-de7ey restart your computer and/or check bios again??
@@blasesux it finally worked, I had to deactivate it, reboot, then activate it but in custom mode and after that activating a product key or something it finally worked.
Yea XD
Real
what if the validation fails?
Thank you for the video. For some reason, when I switched the boot to secure and pressed F10 and went back into windows, my system information still said Secure Boot State was off. Fixed the issue like some others by going back into the bios menu, changed secure boot to disabled and an option that said ‘standard’ to ‘custom’. Restarted the pc and let it load windows fully, went back into the bios again and switched it all back to standard and enabled secure boot. No idea why that had to be done but it worked.
Thank you, this worked for me!
This save my time! Thank you so much
This save my time! Thank you so much
For anyone who is still stuck, when you change the option from custom to standard, click "yes" when it asks to load factory defaults and then click "no" when it asks if you want to exit without saving. Do that and it should boot with secure boot on.
Why does this work😭 grateful nonetheless
THX YOU SO MUCH I COULDNT FIND THE SECURE BOOT AND I WATCHED UR VID AND FOUND OUT THAT WE HAD TO DISABLE THE CPM OR SOMETHING U EARNED A SUBB
No problem my friend! Glad it helped!
@@RollwithPunch Hey man, I know you're not an IT helpline, I followed the steps and done the conversions in the command prompt I'm now met with a screen that says. "an operating system wasn't found. try disconnecting any drives that don't contain an operating system. press ctrl-alt-del to restart"
I'm left with a black screen and I cannot do anything I can never get to the BIOS but I have no idea of what settings I need to be able to change, is my main work computer I'm unable to do anything so if you have any solutions it would help me out I'll be very grateful
@@woz775 Try what it suggests, as this is what I would do. Remove any drives that do not contain an operating system.
So glad to have found this video - AMD, two settings in BIOS, and done -- after an hour of googling and watching videos that didn't have the whole story. I don't get why this information was so hard to find. Would love to buy you a coffee if I could.
You're welcome! If you are serious about the coffee, you can leave tips on the videos using the Thanks button :D
Never knew it was the MBR that caused all the problems. Also didnt knew you could convert it to GPT. Thank you so much for this clear tutorial!
Thank you so much! I've been frustrated for so long trying to get my system upgraded to windows 11. Your very clear and thorough tutorial was just what I needed to find the missing piece (converting MBR to GBT).
mine unfortunately still says that secure boot is disabled in system info, despite showing as enabled in bios
Same..
Same
@@mittens567 i fixed it
cause your changing the setting in setup mode not in user mode, how i do it is i change the secure boot mode to custom and then back to standard. and then the system mode will say "user" instead of "setup", then disable secure boot and then enable it again. hope this helps
@@AlphaTSB the stuff in the video didn’t work but your method worked just like you said. Thank you so much🙏🏽🙏🏽
You know, I just went into this video wondering why it's 11 minutes for just enabling secure boot....
and I noticed it's because it's a super basic guide for even the people who has never seen the BIOS screen. Especially loved the way you entered BIOS via recovery restart rather than telling people to spam DEL/F12 :D
I need to use a windows 10 recovery disk to access recovery settings. Mbr2gpt fails when I enter your command line.
6:05 Secure boot appears when disabling CSM support!!! Thanks a million for this discovery! Completely odd logic in the Asus bios setup, but you nailed it. Thanks a million for this discovery!
Thank you inshallah❤
THANK YOU for this I thought I was going crazy
Very serious - thanks again!
Thank you so much for the tip! it means a lot and lets us know our content is helping!
Thanks so much, it worked.
For people who have Secure boot state still showing off even after enabling the secure boot in BIOS,
you might try go into BIOS > Security Tab > Secure Boot Mode - Custom > Key Management > Restore Factory Keys > Save & Exit. (Refer to 6:40 for the security tab)
Thank you for helping share this, additionally we have since released a video that covers this topic: ua-cam.com/video/I65j7U6mMDw/v-deo.html&lc=Ugx8OfTsxeSGR7NBmo54AaABAg
did this and it worked for me, thanks!
2:40 disk layout validation failed....
Bro what do u do if secure boot still says off
I don’t know I have the same problem
Please watch this video: ua-cam.com/video/puOzgbG1T8Y/v-deo.html
Use the reset button
@@snwdwg1 worked for me
My secure boot won't even let me click on it -_-
You can check the partition style from CMD in recovery mode:
diskpart and hit enter then type list disk to show all connected drives. Note the disk number of the one you want to check. In the disk details, in the GPT column if there is * (asterisk) then it means the partition scheme is 'GPT', and if there is no * then it means the partition scheme/style is 'MBR'.
Then if you get a message like:
MBR2GPT: Attempting to convert disk -1
MBR2GPT: Retrieving layout of disk
Failed to retrieve geometry for disk -1
Just type the number of the disk that the disk part utility gave you. For me it looked like mbr2gpt /disk:0 /validate and then mbr2gpt /disk:0 /convert.
Worked like a charm! Awesome video!!!
Thank you so much. I've been trying to solve the blue screen problem after enabling the TPM and secure boot. Many videos about the topic but nobody knows what they do. All of them copy each other. The real issue was the partition style. I've followed you and converted the MBR partition style to GPT style and enabled what I need and it is done.
🤭🤯🤓
PSA: for anyone getting a validation error after doing the mbr2gpt /validation. I had to go into disk management and assign my partition a drive letter. This fixed the issue for me.
The gtp conversion did everything for me, thank you!
I thought when you convert, it will erase the disk as well
Hello, in the cmd comand , when I press the first line of code it says cannot find os partition for disk 0
I tried this method and in the command promt when i typed in the command it said that "Disk layout validation failed for disk". What can I do in this situation? Thanks for the help
Unfortunately if it is not working your likely best solution to ensure you don't have problems in the future is to do a clean install. If you would like to watch out guide you can visit here: ua-cam.com/video/QU2LlQPeQdI/v-deo.html
Had the same problem. Had more than 3 particion on that drive. That was the reason it failed. Emtied a particion, expanded windows partition and it worked
Same here. Deleted the extra partition and now it works.😊
Just watched too many guides to find THE ONLY ONE i need, THX so much
Gad it helped!
Been looking for guides on how to enable secure boot on AMD mobos! Thank you for this!
I don’t usually comment on videos but this one DEFINITELY worked , I can now play madden 24
When i try the command prompt section for validating the mbr2gpt its says "Disk layout validation failed for disk 0" could you help me with this failure?
And what did u do ? works nie?
6:30 When I do this step and restart, my computer bring me back to the BIOS :(
Same. how do you fix it bro
thank you mate! i watched thousand of videos to fix the problem for correct booting after activating secure boot, and finally i did it!
I can’t tell you how many articles and videos I saw trying to tell me how to fix this but then I got yours and it’s perfect Thank you.
I tried this a while back and couldn't get secure boot to load my windows drive. Turns out it needed converting and this is the first I've seen about it. Thought I was having issues with bios problems as my drives would no longer show. Just wanted to say thank you for a fantastic guide. Saved me so much time and frustration.
In System Information it shows that Secure Boot is off but in the BIOS it's on.. My bios is exactly the same also and followed all the steps
One word, wonderful. clear and concise instructions. you need to continue to do this and the channel will blow up.
Thank you! I had hair until I ran into this problem. Your video was way more helpful than the two sentences in the Gigabyte mother manual: Secure Boot Allows you to enable or disable Secure Boot and configure related settings. This item is configurable only when CSM Support is set to Disabled.
Help when converting it does it on a different disk not on the disk where my OS is
So select the right disk
My mbr2gpt conversion wouldnt validate or convert. It says disk layout failed for disk 0
I’m have the same problem did you ever figure it out?
If you can’t find ‘Secure Boot’ option under BIOS on intel Gigabyte, make sure the ‘CSM’ is disabled, reboot and then go to BIOS again straight away.
It will be there.
Thank you so much man, much appreciated!
this acutally helped ty🎉
No joke, i spent about 3 to 4 hours and this video saved my sanity. I haven't had to deal with Windows 11 but im familiar with installing other versions of Windows. My issue was that when enabling fTPM and secure boot i would not only be unable to boot into windows but couldn't even see my boot devices. Long story short i didn't have my drive using GPT. I did have a secondary issue in the bios that caused me to not see TPM 2.0 in windows. Theres a option under TPM 2.0 to hide it from the OS. Thanks for your video
Thank you! I have an AMD bios and this worked successfully for my PC. Very clear instructions and easy to follow. Clutch.
You're welcome!
OMG THANKS YOU SO MUCH !!!! I CAN FINALLY INSTALL WINDOWS 11 !!!! I couldn't just because of Secure boot that was (when enable) not booting windows and redirecting me in the BIOS options. BUT ITS NOW FIXED THANK YOU SO MUCH YOU ARE A LIFE SAVER !!!!
Awesome, clear and concise. Saved me from buying a TPM module lol. I had no idea it was already on my motherboard. You’ve gotten my like and subscription Thanks for the video!
I was stuck booting into the bios when I first tried to enable secure boot. Seems all I had to do was change the format of the SSD 😭 you have saved me so much time and money 💪
I have your problem too Should I make the system UEFI to avoid getting stuck in Bios?
@@revengexd__ honestly, I think it’s just a lot of trial and error. Be patient and come back to it with a fresh brain. I’m sure you’ll have it done in no time :)
Thanks! Couldn't have figured that out on my own.
Thank you so much for the tip, I will give you a shoutout in the next video!
Thank you very much for this detailed and easy to follow instructions vídeo! I was able to finally activate secure boot in my AMD board.
Keep up the good work!
Glad it helped
Im on the AMD also, I got the TPM to work but I can’t get the secure boot to work. Any idea why?
It's still showing secure boot off- 7:47
I have the same problem did you ever fix it or am i screwed
@@Shaki010 yeah, reset to default and then try again, it got fixed
Hello, so I have enabled tpm but when I go into the secure boot option and enable it, under it it says not active and it won’t let me click on it, after finishing and saving I do the system info thing and look at the secure boot option and it says off. Also for some reason my mouse got a little bit of lag. Please help, I’m very bored and the game I want to play needs this… I think
yeah i’m having the same problem
Any fix?
Same
@@noadoesnotpost For everyone Having the same issue, Yes, there is a fix. Basically in the bios, in the boot tab, at the very bottom, there's an option called Preferred Operating Mode, and by default, it should be set to Auto. Change it and mess around with each option, because I don't remember any of the options (I think one might be called Custom if so, select that and try to activate secure boot) because this was a while ago, but yeah, pretty weird way to have bios set up in my opinion, but what can you do?
@@Yrkzerk I got it working but thank you I found something on Reddit thread that worked
After I clicked ok when it said “secure boot can be enabled when system is in user mode. Repeat operation after enrolling platform” it still said disabled
you helped me and saved me money i hope you have a great life man
I appreciate the comment, thank you!
Thanks for the work around to get the HD formated without loosing all my work now to upgrade to 11
there are no advance option.. 2:01 im so confused, so stuck here rn..
Lifesaver! I was going crazy! Good job, straight to the point. 👌🏾
Thanks bro Nobody says that the first step is to convert the hard drive and then to activate it in bios Really appreciate it
Hello I tried to enable the secure boot in gigabyte but said "secure boot can be enabled when System in User Mode. Repeat operation after enrolling Platform Key(PK)" pls help!
In the same meu remove user mode.
@@RollwithPunch On my gigabyte bios if Secure boot says Enable it wont show ON on Windows System Information. To have it ON in Windows, Secure Boot needs to be set to "Enable" AND "Active" otherwise it wont show ON in Windows. Don't know why ?
@@Black_Onyx same here
watch this it explains how to do it link- ua-cam.com/video/KF2vdUnzLlg/v-deo.html
thank you so much bro your video really helpd me ❤❤❤❤❤
I did everything you said and I enabled my secure boot but when I look in the system information it says "Secure Boot State Off" after I enabled it can you help me please 🙏
I am having same issue
Try updating windows or your BIOS
@@RollwithPunch Same issue as well. Secure boot in system info is still off. I tried windows update and also flashed the latest BIOS update for my board (f36c update for aorus x570 xtreme 1.1).
@@RollwithPunch how do u do that for ur bios
@@divnad watch this vid it explains how to do it, it worked for me link- ua-cam.com/video/KF2vdUnzLlg/v-deo.html
Thank you man you got a subscriber
I converted my boot drive to GPT successfully. I also enable Secure boot in my BIOS. However, the state of secure boot is "Not Active" even though it's enabled. Same if I turn on TPM in the BIOS. Which if I do that, I get a blue screen upon boot. How do you fix this? I should mention that it is an AMD based system. Gigabyte motherboard fully updated BIOS.
Having the same issue, Secure Boot is enabled in BIOS but still not On within System Info.
Same here
It may be an issue with my TPM device. I recently upgraded my motherboard. Still a Gigabyte but an X570s board. Got a new M.2 drive, created the GPT partition no problem and formated. I successfully installed Win 11 with everything turned on. Seems to be working fine now. I can only determine that the module was faulty.
@@perspecttv8956 did you find a fix?
did you find a fix?
Thank you! After watching many videos talking about the same thing, the problem was in the SSD format. Changed to gpt and W11 installed. You have a new subscriber!
Thank you for the easy to follow instructions. It worked for me. I am on Windows 10 with Gigabyte Aorus x570. Earned yourself a subscriber.
Great to hear!
Thank you so much for this video. I had everything ready to go except my master boot record converted to GPT. I didn't know anything about that and couldn't find anything about enabling secure boot. That was my only hang up. Thanks to your video, it identified my issue and once I converted my MBR to GPT, Windows Health Check said I was good to go. Unfortunately Windows Update said otherwise. However after Googling it, I found the commands to run in command prompt in administrator mode that fast tracks windows update to finally allowing Windows 11 to be installed. I'm installing it as we speak. Thank you thank you thank you!
Great video and didactic clarity - as well as amazing attention with your second video on how to enable secure boot through factory key reset. Gained a follower!
Glad you think so, wanted to make it as detailed as possible
A very good video , I want to ask if I convert the disk drive from the command prompt all the data in the drive will be lost?
I appreciate you man. Going into BIOS can be a scary thing but you gave a great explanation!
Glad to hear it!
After turning on secure boot with my AMD processor and Gigabyte motherboard, my pc wont boot fully and cycles between VGA,CPU, and DRAM LEDs on the motherboard
I enable secure boot and when I go to check if its enabled in system information it says disabled
Me to
@@liranunp6274 it was on until i did update for my bios
does it say "On" in windows now or not after doing the BIOS update.
@@JustMarzy how do u update your bios
Same for me is there any solution
so you made sure your hard disks were GPT then you changed your motherboard to GPT as well?
That conversion guide helped thankfully for me it was just the formatting that was the issue but sadly it's different for everybody and this my friend is the best guide I've seen
Thank you very much for the positive feedback! I'm glad you thought the video was a really good guide!
Thanks for making such a useful video - if only others were as clear as you!
Hi! I am following all of the steps, but my system information still says that secure boot state is off. Any ideas?
Me too have you got the answer yet?
Same here..
Same, I can’t find out why
@@BradenPearce14 I did some googling and was able to solve it, I don't quite remember what I did, but a few quick googles can help. I think I reset to factory keys and then tried again
ME TOO
I watched your 3 videos on the topic and would like to share that you have earned my Subscription. Today disabled CSM due to other issues and shortly after found out that I shouldn't have done that without checking the disk format (thankfully it is GPT) and the TPM (Thankfully I somehow have it enabled and active) - so now I only need to enter the BIOS and Enable Secure Boot the way you showed in these 3 videos. Thank you.
thanks you so much men this video helps me alot🎉😊🙏🏽🤘🏽
Goated tutorial. Goated UA-camr. Followed the steps exactly and it worked. Downloading windows 11! Thank you! You’ve earned a subscriber!
Thank you for this video. It helped a lot :) For those who cannot find secure boot on B250M-Gaming 3, try changing the Windows 8/10 features from Other OS to Windows 8/10. Activate attempt secure boot, then set the secure boot mode to Standard.
kisses ❣️
You helped me a lot, all the best for your life
@@jaopolonio5726 You're welcome, and thank you ^^
In windows it says that my bios mode is uefi but when I go into the msi settings it shows my bios mode is still csm so it won’t let me turn on secure boot can anyone help with this
Hey man, followed everything in your video, but my secure boot keeps showing off, don't get why this is happening, if you have any suggestions that would be great, fantastic video as well
Please watch this video: ua-cam.com/video/puOzgbG1T8Y/v-deo.html&lc=UgwN-dBcaQp_k0Stb_R4AaABAg
I cant change Mbr to gpt if i trying to CMD command "mbr2gpt /validate" i see "Cannot find OS partition(s) for disk 0 anyone can help me pls?
Holy moly this was an amazing tutorial video! Thanks you very much
Glad it helped!
I am getting a failed validation when in command prompt and therefore can't convert to gpt. Does this have to do with with having multiple hard drives?
Fantastic video that makes this convulsed process simple and understandable! Thanks so much!!!!👍🏻👍🏻👍🏻👍🏻
Glad it was helpful!
Great video, but I have a problem. When I go into 'Advanced Options' , I don't have a 'UEFI Firmware Settings' menu to enter. My motherboard is an Intel based Z97X-Gaming 3, manufactured in 2014. Any help would be greatly appreciated. Thanks!
Very well made, thank you very much, converting MBR to GPT was a breeze!
Glad you liked it!
@@RollwithPunchin bios it says secure boon enable but system information says off
For some reason my pc says I have secure boot enabled in my bios but not in my pc when I turn it on do you maybe know the cause of it?
You can skip a few steps in Disk Management. Instead of going through a couple layers to get to the disk's properties you can get their directly.
Find the (C:) drive, but instead of right clicking on it, go to the very beginning of the same row, right click where it says "Disk N" (where "N" is the disk number) and then select properties.
Thanks man. Just wonderfully, in-detailed explain every bit of step, moves. thank you so much. i was tired searching for this secure boot option, but no one on earth mentioned that CSM enabled lead to no secure boot. you just made my day sir.
This is the solution I needed and its works!!!!
I have a gigabyte motherboard and for some reason i dont have secure boot in my bios settings
tysm, u are a life saver, i literally looked in every option and couldnt find it, i was sure that the secure boot option was hiding somewhere
greetings from romania!
This worked!! I was skeptical but amazingly, it worked for me. Thank you so much.
Sorry when i type the command on the prompt at the beginning it says validation failed for disk 0. What do i do?
Any idea how to fix this? "Disk layout validation failed for disk 1" ?? Thanks... P.S. I'm doing all this so as to "upgrade" to Windows 11 - I assume GPT is neccessary?
Maaan just don’t know what to say. Thank you very much! Helped a lot, and did not even find anyone else who could help. Thank you!
No problem! Glad it helped!
Thank you so much 😂 everywhere it says "just enable secure boot" but I didnt know where to find it, glad someone just showed me exactly what to do, love ya dude
I also don't usually comment but the first part of your video (changing your Hard drive from MBR to GPT) should come with a warning... Noobs like myself did not know about the partition failure!! When you transition a drive, if the drive has partitions for recovery, buffer, etc; the. The conversion process will spit out a complete AND an error message of "cannot find winRE"??!! This is because the conversion erased the partitions and then It doesn't know how to restore them without winRE...
This is all well and cool if you have win Recovery on a disc/USB, but I upgraded to win 10 from previous windows through the windows assistant.
Either way, it is a good video. Just needs a warning for the MBR/GPT for noobs
I tried other videos but never got it to work. Followed yours and got it on the first try. Thanks!
When i enable secure boot my pc actually doesn't boot at all and stays in the motherboard banner and doesn't charge the os :/
This is great, worked for me after researching and trying so many different options. It was pretty straightforward so a big thank you and Kudos to you.
Thanks!
Thank you massively for the tip!
AWESOME VIDEO BRUH
it actually was breaking my brain and this video explained EVERYTHING
tysm
I want to thank you so much for this tutorial. Please everyone do exactly what he said and don't half ass the process. I couldn't get my pc to go back into windows and after watching the video from the beginning i realized I messed up and now it works. Thank you for a very detailed video on this .a++++++
This is the most clear and concise explanation of this ever great video man
i want to make this to my SSD(Windows is here) if i convert it gpt am i gonna lose data or is it dangerous for me ?