@@dxka06 it was discontinued back in 2010 you cant buy it anymore unfortunately the only way to get your hands on one is preowned and just the mm12p frame kit sells for around 3-$3500 and your going to want one with the reinforced engine mounts if your going to be running the daytona 190 but there definitely not cheap to build, im into mine for close to 10k but thats bc i built mine from the frame up with all new parts
You can check the valves whenever you want its not to hard but i usually do after every couple of races and replace the top end once a year just to be safe yaknow but I honestly dont have a hour meter on it. I gotta put one on it for sure
First remove the end cap then you will see the small allen bolts underneath that part and the just take off the insert and re install the end cap and your good to go. Removing that red insert just allows it to rev out more
Im not sure if it would bolt right into that frame..if the new crf110 run the same mounting points at crf50/70 then yeah it will will work..that would be sick
Long discontinued unfortunately they wont ever be making the older discontinued frames. They are coming out with a new honda crf110 perimeter frame some time this summer but im not exactly sure when they will be available but i have seen a picture of one they built and its sick. Should be able to use 3 different engines in it with the engine mounts
Thats is a daytona 190cc engine its not a honda engine but its based off one. It will fit in a crf50 frame but most likely will crack it bc to much torque and there heavy
I bought it pre owned off some random person. They discontinued this MM12P frame back in 2010 after BBR produced something like 200 of them as full production bikes called the “Mini Moto 12” Production” aka MM12P ..only way to get one now is on the pre owned market & they are very expensive just frames will run you close to $3K
All depends but the 4 valve will most likely be more rowdy bc its got twice the amount so its gonna allow more air out an in …obviously testing with same exhaust
@@JacksonHedlund352 unfortunately you can’t anymore they were hand made in house at BBR they only made about 250 of these bikes so they are really rare and expensive when you do find them for sale. All the plastic on this bike was made by BBR for this bike
@@JesseK410 dang man what a shame, never got a chance to get a hold of one. been watching out for someone selling one, but i doubt anyone would sell it unless they didn’t know what they had.
@@MississippiMudMX oh i hear you but you would be surprised theres a bunch for sale if you wanna pay a hefty price haha, talking like 10k+ for something like mine..if you go on facebook check out the group called “BBR PERIMETER BUILDERS” you will find all the BBR bikes an frame for sale. Thats the go to page if your looking for one, i post all the time on there and there’s lots of good information on there as well as the guys that built these bikes so its pretty sweet! Check it out if anything. 👌🏼👍🏼
@@MississippiMudMX rite on! Lmk if there’s anything i can help with im pretty familiar with these perimeter frame bikes. Ill keep an eye out for a good deal but crazy prices rn, someone is selling the same frame as this one for $5K! Haha 😆 an I thought i payed to much.
@@Markonacr250r oh hellyeah i would like some og bbr dress up parts but super rare and people always want crazy money for them, sometimes its not worth it to me bc im using these parts on a race bike and there obviously going to get beat up
Well made pit bike
Thats a fact 👍🏼🏁
Looks Sweet Brother Respect 👍
Thank you! I appreciate it
love the bike
Thanks i love it too haha, long time building this ☝🏼
@@JesseK410 i would love that thing to rip out in the midel of the bush
@@JesseK410 where can i get the frame😤
@@dxka06 it was discontinued back in 2010 you cant buy it anymore unfortunately the only way to get your hands on one is preowned and just the mm12p frame kit sells for around 3-$3500 and your going to want one with the reinforced engine mounts if your going to be running the daytona 190 but there definitely not cheap to build, im into mine for close to 10k but thats bc i built mine from the frame up with all new parts
What’s the maintenance like on that? How often do u need to do top ends/check valves?
You can check the valves whenever you want its not to hard but i usually do after every couple of races and replace the top end once a year just to be safe yaknow but I honestly dont have a hour meter on it. I gotta put one on it for sure
🤘🤘🤘 deffly one of the baddest buiod
Appreciate that buddy! ✊🏼🏁
How did you remove the spark arrester
First remove the end cap then you will see the small allen bolts underneath that part and the just take off the insert and re install the end cap and your good to go. Removing that red insert just allows it to rev out more
@@JesseK410thanks
@@JesseK410 does it also make it louder
@@tracebennett7379 you’re welcome
@@tracebennett7379 yeah ide say it makes it a lil louder, slightly different tone
If i built a 2024 crf110 could i put the daytona 190 in it or is the frame too weak
Im not sure if it would bolt right into that frame..if the new crf110 run the same mounting points at crf50/70 then yeah it will will work..that would be sick
I think they use grom mounting points so you get the grom adapter for your year 110 or find adapter listed for 110
@@llesurFigueroa-lk3fe yeah might wanna beef up that frame a lil bit bc the daytona engine is heavy
Bbr still produces them? Last time I looked for their perimeter frame and swingarm they were discontinued
Long discontinued unfortunately they wont ever be making the older discontinued frames. They are coming out with a new honda crf110 perimeter frame some time this summer but im not exactly sure when they will be available but i have seen a picture of one they built and its sick. Should be able to use 3 different engines in it with the engine mounts
Is that a crf 50 bored out to an 88? I'm asking because I want to know if this will fit on my buddy's crf 50 frame bored out to a 88
Thats is a daytona 190cc engine its not a honda engine but its based off one. It will fit in a crf50 frame but most likely will crack it bc to much torque and there heavy
We're u get the frame
I bought it pre owned off some random person. They discontinued this MM12P frame back in 2010 after BBR produced something like 200 of them as full production bikes called the “Mini Moto 12” Production” aka MM12P ..only way to get one now is on the pre owned market & they are very expensive just frames will run you close to $3K
damn they should've sponsored u all them parts haha
@@Breakingbylaws haha that would be sick, they definitely help me out and i get a lil discount on parts
which engine sounds better 190 2v or 4v?
All depends but the 4 valve will most likely be more rowdy bc its got twice the amount so its gonna allow more air out an in …obviously testing with same exhaust
Which series Daytona
Daytona 190 FDX
Where can I get the rear end plastics 🙏🙏
@@JacksonHedlund352 unfortunately you can’t anymore they were hand made in house at BBR they only made about 250 of these bikes so they are really rare and expensive when you do find them for sale. All the plastic on this bike was made by BBR for this bike
Ciao che cerchi monti ?
BBR frame
Yessir the best
Its a BBR MM12p
can you still buy the perimeter frames?
Unfortunately not but i have a feeling they (BBR) will start making them again
@@JesseK410 dang man what a shame, never got a chance to get a hold of one. been watching out for someone selling one, but i doubt anyone would sell it unless they didn’t know what they had.
@@MississippiMudMX oh i hear you but you would be surprised theres a bunch for sale if you wanna pay a hefty price haha, talking like 10k+ for something like mine..if you go on facebook check out the group called “BBR PERIMETER BUILDERS” you will find all the BBR bikes an frame for sale. Thats the go to page if your looking for one, i post all the time on there and there’s lots of good information on there as well as the guys that built these bikes so its pretty sweet! Check it out if anything. 👌🏼👍🏼
@@JesseK410 i sure will
@@MississippiMudMX rite on! Lmk if there’s anything i can help with im pretty familiar with these perimeter frame bikes. Ill keep an eye out for a good deal but crazy prices rn, someone is selling the same frame as this one for $5K! Haha 😆 an I thought i payed to much.
Где можно купить дайтону??
Thank you! 🙏🏼
Thing sounds mean
For sure! Thanks man i appreciate it
Carbon tank. Shit man
Tank cover lol. Sick bike. Needs a few og odds and ends.
Unfortunately its just a carbon cover haha P3 makes them
@@Markonacr250r yep haha..and like what its got all the goodies already
@@JesseK410 your right I’m talking about dress up parts for the Honda engine really
@@Markonacr250r oh hellyeah i would like some og bbr dress up parts but super rare and people always want crazy money for them, sometimes its not worth it to me bc im using these parts on a race bike and there obviously going to get beat up
Top speed ?
@@Mirtador 100