Why so many dislikes? He programmed the chip using USBasp and TXed data to computer using CH340, USBasp doesn't allow this type of communication. Good Video buddy
This is exactly the USB to TTL device that I have. The problem is, I just can't hear what you are saying. Do you have an updated version with a little better sound quality?
Arduino & Atmega8 yes I have please, l used the Accessport137 for recognizing voice but it’s not response, l don’t know what’s wrong!!! I used TTL USB &voice recognizing module v3
I do`t have the same module, but try changing the settings of the com port on the computer, speed and data type. Go through all possible speed options, one of them has to be working...
On the video jumer set in 5v position. But it connected to atmega8, so it`s ok to use 5v. But if your device support only 3.3v just set the jumper in required position (3.3V)
@Abdul Hakeem Memon This device are create virtual com port that can communicate by Rx Tx with any devices (UART). You need to set up any program that able to open com port, like Terminal 1.9b RS232 , and press "StartLog".
it is compatible with any chip that have uart (Rx Tx) on the board . 328 in DIP - pin2 (PD0) - Rx; pin3 (PD1) - Tx. You can googe "Atmega 328 dip pamming" and open Images tab
А что непонятного? В атмегу8 записали простейший код, который выдает в ком порт "Привет мир" через usbasp. Потом он просто служил как источник питания (usbasp) атмеги. Атмега посылала каждую секунду по уарт эту фразу (по линии Tx), а модуль CH340 подключенный к меги8 принемал эти данные и выводил в ком порт (в монитор ком порта)
Why so many dislikes? He programmed the chip using USBasp and TXed data to computer using CH340, USBasp doesn't allow this type of communication. Good Video buddy
This is exactly the USB to TTL device that I have. The problem is, I just can't hear what you are saying. Do you have an updated version with a little better sound quality?
If you have any, any questions, advice or something Please, ask!
Arduino & Atmega8 yes I have please, l used the Accessport137 for recognizing voice but it’s not response, l don’t know what’s wrong!!! I used TTL USB &voice recognizing module v3
i have same problem in same facts.....voice recognition module not working
MD ALAMIN HOSEN try to use Echo
علا - I don't understand....
I do`t have the same module, but try changing the settings of the com port on the computer, speed and data type. Go through all possible speed options, one of them has to be working...
please buy a normal camera... seems like you shot this on 0.5 mpx Siemens S60
Hope you can find a better mic... audio terrible. You may have wrong mic selected.
CH430: So in the jumper position shown at 1:53 does it use 3.3v or 5v? I need to flash a sonoff and it requires a 3.3v line in. Thank you
On the video jumer set in 5v position. But it connected to atmega8, so it`s ok to use 5v. But if your device support only 3.3v just set the jumper in required position (3.3V)
We love your channel, 🙏
voice too low in video
老铁们 用中文也行啊
Please tell me is current version of Arduino ide and windows
Are able to detect ch340directly
Or we need to install driver
driver installation is required in any OS
can I use this with an apc 220 radio transmitter
Can I connect this device directly with hdd and desktop USB, I need get terminal log how do I get it
@Abdul Hakeem Memon This device are create virtual com port that can communicate by Rx Tx with any devices (UART). You need to set up any program that able to open com port, like Terminal 1.9b RS232 , and press "StartLog".
drive.google.com/open?id=167IBjqJIHE99_q62s-ZTeWBP8OcZIXxY
Sound? Couldn't hear the audio.
Lot of people on cheap phones, I can here fine
@@pbart9821 I listened on headphones and it was a bit better.
İs it Atmega 328 DİP Chip compatible?
it is compatible with any chip that have uart (Rx Tx) on the board . 328 in DIP - pin2 (PD0) - Rx; pin3 (PD1) - Tx. You can googe "Atmega 328 dip pamming" and open Images tab
Oh damb. This video looked bang on target for my issue. But, no audio. Bugger.
Can one use it with raspberry pi 3 and e.g. a gps module? Like usb gps?
yes, just connect Rx to Tx, Tx to Rx pins gps to ch340 and GND
Do you have a tutorial on how to use it with GPS module? I want to use Navit on Raspi 3 B like any normal navigation device (similar to Garmin).
Not yet, sorry about that, maybe one day...
могу лишь сказать учите русский я ни хрена не понял
А что непонятного? В атмегу8 записали простейший код, который выдает в ком порт "Привет мир" через usbasp. Потом он просто служил как источник питания (usbasp) атмеги. Атмега посылала каждую секунду по уарт эту фразу (по линии Tx), а модуль CH340 подключенный к меги8 принемал эти данные и выводил в ком порт (в монитор ком порта)
да и есть русские видео на тему модуля CH340
audio is horrible
непонятно
Что именно? Хотя спустя два года уже явно вам всё понятно)
poor video, sorry