Flywheel modification - Gen 1 Z1000 (03-06)
Вставка
- Опубліковано 6 вер 2024
- How to do the common ZX-9R flywheel swap on your 2003, 2004, 2005, or 2006 Kawasaki Z1000.
DISCLAIMER: Lonely Ryder is NOT a professional mechanic and is NOT responsible for any injury or vehicle damage that may result from individuals attempting the repairs shown in this video!
You have been warned, try at your own risk!
Link to Fly Wheel Puller:
www.amazon.com...
Outro Music: "Voices" by Patrick Patrikios (UA-cam Audio Library)
What year zx9r stator and flywheel etc did you use pal
I'm pretty sure the stator and stator cover doesn't matter, they are all the same. I think any year flywheel will work also, but the 00-03 years are better. The reason is because the 98 - 99 flywheels are heavier because they don't have the weight reducing holes drilled into the steel back portion. If you search for a 99 flywheel on eBay, then search for a 00, you will see what I mean. The difference is visible. So try to get an 00-03 flywheel if possible.
Thank you pal
What difference did it make to the bike
@@leopeacock2986 Hard to say, I don't have dyno numbers to give you. The engine seems to rev a little quicker from what I can tell.
@@lonelyryder7441 does it feel any different when your riding improved acceleration etc would you say this mod is worth doing
Bro thank you for the vid. The more vids about Z1000 the better. I am about to do your airbox mod and also do the flywheel although as far as I understand you can also trim the original flywheel without the need to replace it, meaning you do not need a whole ZX9R flywheel swap.
Couldn't you have just de-pinned the connector plug from the Z1K stator and repinned it to the ZX9R ?. I wonder if it's worth just getting the factory flywheel cut down and balanced at a machine shop. It probably doesn't amount to much of a power gain, but I'm sure it's more responsive with less rotational mass. This was interesting and insightful, thanks, maybe I'll do this to my 03
That's a good question, I don't remember why I didn't use the Z1000 connector. It's been a couple years, but I think I just plugged the wires in for a quick test to make sure it would work and then got lazy, lol. So my temp fix became my permanent fix. I still have it somewhere, maybe I'll put it on someday :)
We are going to have to teach you Americans, its a Zed thou. lol!
Haha! We insist on being different, that's also why we don't use the far superior metric system, lol! 🤣
Che lavoro è stato fatto?
Did you do smog blocking plates???
Yes, I briefly mention them in my "valve adjustment" video. Mine are made by "Black Path Racing".
I thought you were selling your bike.
So did I, just hasn't happened yet. Looking for a nice K5 GSXR right now.
@@lonelyryder7441 Keep doing these mods and making video content on them. It's motivating me to do these mods on my 05 Z and I've been enjoying the bike all over again. Would love to see the zx9r cam swap eventually.