Upgrading the Worker Seagull 250fps Nerf Blaster!
Вставка
- Опубліковано 27 жов 2023
- In this video I open up the Worker Seagull Nerf blaster and install CNC metal parts from Sabre in Singapore.
I also plug the hole in the plunger tube.
After upgrading the blaster, I test it with Worker Rifling and then two different Sabre riflings, a SCAR and BCAR.
Metal Plunger Rod (USA): outofdarts.com/products/harri...
Catch and Harrier Mag Release (USA): outofdarts.com/products/sabre...
1.6 x 300mm Spring (USA): outofdarts.com/products/worke...
Worker Half Length Darts (USA): outofdarts.com/products/worke...
Sabre BCAR (USA): outofdarts.com/products/sabre...
Metal Plunger Rod (Australia): square.link/u/9nCOHB3C
Metal Catch (Australia): square.link/u/xT2A1SEs
Worker Bamboo darts (Australia): www.foamwork.com.au/product/w...
All Harrier/Seagull parts (Singapore): springblasters.com/search?q=h...
Sabre BCAR (Singapore): springblasters.com/products/s... - Розваги
Metal Plunger Rod (USA): outofdarts.com/products/harrier-metal-plunger-by-sabre?_pos=2&_sid=fa95f22e7&_ss=r&ref=RIa3bVI3vXYhUs
Catch and Harrier Mag Release (USA): outofdarts.com/products/sabre-metal-catch-and-mag-release-for-harrier?_pos=1&_sid=fa95f22e7&_ss=r&ref=RIa3bVI3vXYhUs
1.6 x 300mm Spring (USA): outofdarts.com/products/worker-harrier-1-6-x-300-spring?_pos=4&_sid=ae19491a1&_ss=r&ref=RIa3bVI3vXYhUs
Worker Half Length Darts (USA): outofdarts.com/products/worker-short-darts-200-pack-gen3-improved-darts-2021?ref=RIa3bVI3vXYhUs
Sabre BCAR (USA): outofdarts.com/products/sabre-metal-bcar?ref=RIa3bVI3vXYhUs
Metal Plunger Rod (Australia): square.link/u/9nCOHB3C
Metal Catch (Australia): square.link/u/xT2A1SEs
Worker Bamboo darts (Australia): www.foamwork.com.au/product/worker-gen-2-he-foam-dart/1?cs=true&cst=custom
All Harrier/Seagull parts (Singapore): springblasters.com/search?q=harrier
Sabre BCAR (Singapore): springblasters.com/products/sabre-spiral-scar-1?fbclid=IwAR2GOXQhYyBw06-5urMovetQ3ttW9wtDZzGc-1HibdMgApJoyUdAbVLjjl4
Is the metal priming block all metal including the bottom rail ?
@@ryantan1022yes
Instead of removing the grip like that, you can flip up bottom corner of one side of the rubber grip to reveal the bottom screw. Remove the screw. Flip the blaster around and do the same. This releases the metal part of the grip and should allow the rubber grip to slide off.
That would make it a little easier, thanks for the tip!
Is this applicable to the harrier too? Assuming you remove the cutlass style front handguard first
This was way easier to do than I thought!
Every time my 4 year old hears your voice he says, “Watch heavy darts because that’s my favorite video.” referring to your breakdown of the Worker lightweight and heavyweight darts.
LoL
I mean, heavier darts are pretty exciting! 🤣
Each upload is getting better and better mate. Rep'n SA like a boss.
Wow. Great vid. Love the overlay of each rifling’s group towards the end
I do this for every video 😆
Outstanding performance after the upgrades. I’ll for sure have to try the same upgrades to my seagull and take it out on a field sometime! Great mod video man keep it up
Your content is awesome, you seriously deserve more recognition
Thank you for the great video, as always. Very detailed and very helpful.
Man I love the look, sound, design, and I’m sure sturdiness of a lot of 3D printed springers… Being a budget Nerfer, I can’t bring myself to snag one when I can get a X Long to 260fps for $50 total. Wish I had more expendable income 😂 Fantastic video!
This isn't a 3D printed blaster, but I can definitely see where you're coming from. Mass produced injection molded blasters like the ones from Worker are definitely more economical to buy than a 3D printed blaster.
Just curious what all have you done to your longshot? And has it been reliable
this persons longshot has probably exploded by now do not buy that thing lmao
I just let myself get broke, at least ill be poor with a nice worker seagull to take my aggression out with
Thanks for this video!
I am also a reseller of the Sabre parts Western Australia. The parts are worth every penny.
Great vids man
The surface is so smooth
Seagull is one of the Best rental blaster
Is that new blaster the reason why Sabre doesn’t sell M20s anymore?
Look at you, Bradley. Getting the early scoop!
(Being “one of those Americans” I’m used to you getting things after us. LoL jk)
Love your breakdowns, reviews, and blaster gameplays(wish you had more). Waiting on your next review!
The Apex Prime does indeed replace the M20. Video next week.
Thank you for getting me into gel guns love from the US
Being in the US, have you ever tried Airsoft? Similar thing but they shoot further and more accurately.
Gel blasters are honestly just more fun in my opinion more coinvent to.@@BradleyPhillipsYT
daaaaamn that bcar is $115 USD?! That's craaaazy, Almost as much as the Seagull itself, lol.
Hey did you end up after a while having the blaster firing wrong ie lacking power every 4th or 5th shot after the upgrades and greacing as mine is and its getting annoying
Does the harrier also have the same hole in the back of plunger like the seagull too?
Also, is the swift plunger compatible with the harrier/seagull?
Pretty sure the Swift plunger is longer so wouldn't fit, and yes the Harrier has the hole too
I dont understand why your prime is so light. I have the out of darts ood heavy harrier spring in mine and the prime is so heavy i feel like I am going to blow out my elbow.
Hey Brad, just wondering what the best BCAR is for the Harrier/Seagull from your testing so far in terms of accuracy/consistency?
I purchased the 15 degree one from frontline foam and its been working great for me, a definite upgrade over the included worker SCAR
Hey Brad, is the Sabre Metal Plunger Rod thats for harrier compatible with the seagull?
Sure is
What scope are you using
If I used hard plastic tip darts would it hurt? And do I need the metal parts if I put the stronger spring inside?
For getting consistent fps with the 300 spring I suggest the 450 barrel Bradley
I’ve seen that some peoples bcars make a whiz noise after a dart passes through because the bearings are spinning so fast, but with the one in the video and my personal ones, the bearings do not spin or do so slowly. Do you know why?
Possibly the type of bearings. Some don't actually use true bearings but use other things like rivets. Or those ones could be contacting the plastic housing. Not a sound I've experienced with the BCARs I've tested, including Foamwork Adelaide and even the initial Chinese ones.
@@BradleyPhillipsYT gotcha. Ty
I want to talk to you all about barrel coatings
Coming back to this video after upgrading my seagull with a:
260mm barrel i cut down and recrowned from the included 310mm barrel
t238 tracer bcar
1.6x300mm spring
Sabre metal catch, priming block and still waiting on my metal plunger on backorder
But what I'm interested in sharing with you guys is that I've been experimenting with barrel treatments (not waxing them lol)
Frog lube is a food grade metal protectant and lubricant used in the firearm industry. One applied correctly it leaves an almost undetectable film on the material that makes parts extremely slick. After treating my barrel with frog lube and letting it cure overnight I'm shooting a high of 270 fps with an average of 248 over a ten shot test group. Lowest power shot was 187 but I don't think I seated the pusher all the way.
I feel it would be worth doing a more in-depth study into barrel coatings like this that are super easy to apply and maintain but I'm limited to a Chrono that doesn't go to decimal points and I don't feel I could provide the best data in depth.
I was curious @BradleyPhillipsYT if you have ever done any testing with barrel coatings?
Do we need to change the metal plunger rod? Does it improve FPS or is it just for longetivity
?
First, btw great work brad!
Wonder what would happed if you remove the eletrical tape and see if it is any different?
Pretty sure there wouldn't be a difference, but other people online claim it boosted their fps by a lot when they covered the hole.
Wouldn't the metal plunger cause increased wear on the outer shell?
It is twice the weight of the stock plunger rod, so possibly. Though it is padded, the entire power train is metal, and the shell itself is thicker than anything you'd find from Dart Zone, Nerf or Xshot.
I see we have the same amazon screwdriver set
can you plsss do a review of the hl 015 honeybadger v3 gel blaster🙏
Do you happen to know how many degrees the BCAR is?
The string SCAR is 90 degrees, the BCAR looks to be around 10 degrees but I don't have a protractor.
No Harrier POM vs CNC plunger rod vid, now that you got one?
As I was late getting the Harrier I used other people's numbers as a baseline to compare to with the Sabre one. Others have since confirmed the metal plunger increases velocity with the Harrier. I think the Seagull just doesn't have enough air volume to do the same.
@@BradleyPhillipsYT comparing to other Harrier vids, you are the only one getting 300 numbers with the 365 mm barrel. So... Maybe an add-on vid from the master himself for science sake?!
Despite performance I actually prefer the look of my Seagull with the longer barrel
When I installed the OD 300m spring I couldn't even pull it back and you were doing it with 1-2 fingers, was I doing something wrong?
Guessing either you got a different spring, or didn't install it correctly. It should go down inside the buffer tube.
Hmmm looks like the metal plunger rod is gonna go in my Harrier instead of my Seagull, with the 1.6×250 my sd is already really low so there's no reason for me to take the fps hit. Although I wish you tested with the Heavy darts as I've been finding my Seagull struggles to get good consistent accuracy with them.
With the Harrier the heavier plunger rod should actually improve fps.
@BradleyPhillipsYT That's what I'm hoping for when using the Heavy darts to offset the fps loss, which Harrier likes the heavier darts thankfully
When taking the grip off, just take the sling mount off beforehand, it makes it way easier to slide on and off.
That makes sense, as I hadn't actually opened it prior I didn't know where all the screws were located or whether it was only the bottom one holding that on.
I would think a lighter pushrod to be better as it has less mass to accelerate.
Durex? 😅
ua-cam.com/video/tlF4fdPajOE/v-deo.htmlsi=U6MKJG2ZvwJlO7Dk 👀 😂
My Prime is destroyed...the plastic.....so metal is better ❤
i think my seagull may have an air seal problem
Any idea the source? I'd guess a damaged o'ring.
Or not enough lubricant.
Id still reccomend leaving that little hole on the plunger tube just to avoid any vacuum loading, but im not ya mum so ya dont have to
I think it would only become an issue if you're priming the blaster incredibly quickly
@@BradleyPhillipsYT sometimes massed rounds is better than a single tag.
Can’t believe there’s a hole in the plunger tube. I didn’t even look.
I asked Worker about it and they said in testing they encountered vacuum loading without it. They must be priming their blasters faster than most people do.
Just wish the string scar was a bit sexier
When attached to the blaster it comes with, it looks very nice.
Argh, ordering the metal plunger from France isn’t worth at all 😅
i use the sabr bcar on my storm with a 49cm barrel (MM red 50cm barrel, I sawed 1cm to remove the chambering void) and consistently hit 315fps 9SD with worker 1g bamboo. This is an overly accurate motherfucker.. also use EZ 51 darts drum XD
Wait until you see how the Apex Prime shoots with the BCAR.
@@BradleyPhillipsYT I also have a Sabre Ultima, got a pretty good idea ;) hehe
Known for the Apex for a while, I'm very happy to see it launch this will be game changing for lots of people, I'm also really looking forward to see what they changed in the priming mechanism
second!!
(edit I mean third)
Brad you are the person to contact about this. Let's talk about developing micro darts vs traditional 1/2 darts with a higher BC for longer ranges, more accuracy, higher capacity and lower costs... how can we get in. contact.
(Diameter) 9mm to 10mm (micro dart(s vs traditional 13mm (half darts)
(Length) 25mm to 32mm (micro darts) vs 36mm to 38mm (half darts)
(Weight) three different weights .30 gram, .60 gram, and .90 gram (micro dart) vs 1.00 gram (half dart) same fps just more aerodynamics
Would also need to figure out a way to shoot them. A blaster made for that size, plus magazines to suit.
@@BradleyPhillipsYT just a barrel change, newly designed magazines, and internals for a smaller shorter dart
@@BradleyPhillipsYT I think it would be easy to modify any existing blaster. And the capacity would be higher with smaller darts. Wide adoption would make them lower priced based on the dart needing less material to produce. Im just wanting a dart that is more aerodynamic has a boat tail for a high ballistic coefficient. Just squeezing out every bit of performance out of this round while maintaining the same FPS limits 250 fps to 300 fps not exceeding 400 FPS. Look at the first strike paintballs. These have fin stabilizers. people claim to hit 100 yds or more. Look at the Minié ball or Minie ball coupled with rifling compared to the round balls shot out of smooth bore muskets. Half darts are blunt and very bad at aerodynamics. We streamline this Dart lower its weight give it a boat tail make it more aerodynamic and give it good rifling we can have a real winner. EPP foam would work fine. The lower weights would make its be more affected by wind yes but if the dark is spinning fast enough and is shaped right it will shoot farther and more accurate but won't hit as hurt as bad as a 1 gram half dart or a .68 caliber paintball.
@@BradleyPhillipsYT you are the biggest name that can get this going for the sport bro I've been subscribed to you for a long time I've been looking up to you for a long time
@@BradleyPhillipsYT forget it if you don't want the sport moving forward then fine
First I mean 2nd
So in short if you want 300fps go harrier and 250fps go seagull
Yeah
That's the more logical thing to do yes... but if you really want to go balls to the wall you can reinforce the shell.... stick a cut down 1.8 swift spring in there.... a spring spacer.... metal sabre upgrade parts.... butter lubricent.... seal the hole in the plunger tube.... add a longer barrel.... use a Bcar.... and you could achieve 330+ without it breaking..... it has been tested by radioactive mods in the nerf news community server.
I plan to try and do this to go for the world record with one of my seagulls.... I specifically bought 3 of them 1 for 150.... the second for 250 on private property. and one for the world record attempt 330+