Thank you very much for the contribution. I recently bought a BMW E46 320d (2003) and it had the warning lights on. I tried with other versions of INPA without being able to recalibrate the sensor. Using the version video I rectified the steering angle sensor calibration. One note, if you buy the same cable with 4 positions, the position farthest to the right (under letters D-CAN) is the one that worked for me.
The lock to lock technique only requires going from lock to lock once. If you go lock to lock and it doesn't clear then you need to scan the car and relearn the steering angle sensor.
I have an e63 I went from lock to lock , then I shut ignition off and then I restarted it and my light went off. My steering wheel was straight ahead too. Thanks for the video
Ciao evan, ottimo video, complimenti spiegazione dettagliata, ho eseguito la calibrazione angolo sterzata sulla mini cooper s r53, e risolto il problema della spia sul cruscotto. Ciao da italy
Doesn't seem to work on E90 in INPA best to remove battery for an Hr then use inpa to go in and read analog data to check the graph is at 0 again or if an issue is present.
I have a 2003 Z4 30i Random complete loss of elect asst. After parking 10 minutes Left over night power returns & red steering wheel indicator is back off Yellow Check Engine warning is always on ??
My e46 has the same dash light error but INPA said rotation rate sensor error..Please help me to solve this issue for the best option before I replace from junkyard parts..thanks
Thanks for these Video's! I tried using INPA to sort this issue on an E82 125i but get the error message "calibration steering angle only with steering wheel balancer" I also tried with tool32 and get the error IFH-0010: DATATRANSMISSION TO CONTROLUNIT DISTURBED. I'm beginning to suspect that something has not installed properly! I've changed the USB port to COM1 and changed the latency to 1. A bit stuck now!
PLEASE HELP OR ADVISE : I have problem with my e46 325i /2001 1-Battery light is on 2-transmission faulty light is on 3- I hear a bang when switching from reverse to drive When I start the car and see this sign faulty transmission , the car can drive on reverse and other gears except for first gear. If I start the car and sign does not show on dashboard, the car only drives on first gear 35 Km speed max. Took it to many mechanics and nobody could fix it. First guy said he fixed alternator and reprogrammed ECM , The second told me to check and change Positon switch which I did today and still problem not fixed .Now they are saying its the alternator which the first guy fixed. I checked the battery its giving 12.4 V and when car started and I hit Benzin pedal it goes up to 13.9-14 Volt .
Thanks for the video. This looks like my problem but in my case the lights come on and off. They disappear when while driving I restart the car. Another thing is in my case I don't have the shift f4 option. Weird.
@@kouroshtashvishi5031 you can use an app called parallels if you don't want to partition your storage to windows (which you have to do with bootcamp) either on the hard drive or a flash drive. I recommend parallels since you probably wont be using it that often and I'm guessing you don't want to give up storage on your mac
Ryan L you are 100% correct. Since then I have not installed windows just because of how much space it takes up. Thank you very much for telling me this app. I will be downloading it today thanks man
Evan can you tell me where we get your software from and how did you get it to work on a MacBook. I also purchased the CARLY scanner and software ,can it be coded with that?
the trunk release on my e46 coup is not working , it works fine from the FOB but the button under the dash does nothing now, anyone have any ideas? i am thinking maybe a fuse or i did something when i was coding?
90% its bad HSR module which new cost 1500 euros. So try to find used one and see that numbers 679.....are the same and you dont need coding. Used modules are around 300 euros. That is among most expencive modules in bmw.
With a big badass computer. Come on now how many of us have those. The turn of the wheel is what you said. You should make sure these "little tricks" are gonna work before you show us.
@@georgehelton3659 Big bad ass computer? Man what are you talking about, an average person has a laptop at home, all you have to do is to buy the cable on ebay for 10$ and you're set. Otherwise go to the dealer and get willingfully ripped off smh
Thank you very much for the contribution. I recently bought a BMW E46 320d (2003) and it had the warning lights on. I tried with other versions of INPA without being able to recalibrate the sensor. Using the version video I rectified the steering angle sensor calibration. One note, if you buy the same cable with 4 positions, the position farthest to the right (under letters D-CAN) is the one that worked for me.
The lock to lock technique only requires going from lock to lock once. If you go lock to lock and it doesn't clear then you need to scan the car and relearn the steering angle sensor.
E46 Bible ! Thanks for everything and greetings from Belgium !
Thank you for watching!
I have an e63 I went from lock to lock , then I shut ignition off and then I restarted it and my light went off. My steering wheel was straight ahead too. Thanks for the video
did yours come back? i did the same but they came back the next day
Thank you. This video is clear, concise, and assisted in solving my issues and getting up to speed with inpa quickly.
I just fixed mine by watching your video...Thank you so much !!! Super helpful +++!
It works, nice video!
Idea for next video, how to repair or delete de SRS light from dash, even if it is a bypass or using INPA. Every e46 has it.
Ciao evan, ottimo video, complimenti spiegazione dettagliata, ho eseguito la calibrazione angolo sterzata sulla mini cooper s r53, e risolto il problema della spia sul cruscotto. Ciao da italy
Compensation Routines doesn't exist on the dsc57, same version of inpa as you. Is there another menu to do this calibration? Working on an E53 X5
Is there a way to do this for E63 650i with active steering?
Yo! Thanks for the vid! Subbed!
Thanks for this great help
Why on my inpa don't have F4 for steering wheel calibration? It's just same version like yours
My 2000 323i doesn't have a shift + f4 option, what should I do?
Mine doesn't have shift f4 as a option, any suggestions? Thanks
Any updates mine is the same way
Hello sir. What if you have a 2013 750li xdrive and it has the steering light, park, ABS, Brake and check engine light on
Was it the battery 🔋 why it didn't cut right off or can it be a battery that need to be replaced if it's still on
Doesn't seem to work on E90 in INPA best to remove battery for an Hr then use inpa to go in and read analog data to check the graph is at 0 again or if an issue is present.
What kind of software are you using
Nice and thank you!
Great video,,,,.,. is that software still downloadable? will the autel ms906bt work?
Will a steering calibration be needed for an alignment on an e90 or do they just reset steering sensor?
Can this lights pop up if the steering wheel was removed and then mounted on again not 100% straight and aligned with the wheels?
Dude that is a perfect question because I'm starting to think that's what happened to me, did you ever find out?
UP??
Ohhhh Thanks. it worked for me..
Thank you for your lesson
No routines option.. suggestions?
If i have offset Sterling angle -5,14 and in option inpa i cant choice F1 have only F2 and F3 option how calibrate this ?
What will Inpa say if the sensor is bad?
What is the program you use on your computer
I have a 2003 Z4 30i Random complete loss of elect asst. After parking 10 minutes
Left over night power returns & red steering wheel indicator is back off
Yellow Check Engine warning is always on ??
My e46 has the same dash light error but INPA said rotation rate sensor error..Please help me to solve this issue for the best option before I replace from junkyard parts..thanks
So ,, can’t be done without comp, scantool ?
Do You know If it works on FXX series?
How do you know which ABS module to select in INPA? Or will it be the only one listed?
did you ever figure this out?
@@OliverGottberg It's written on the module itself. Otherwise, try selecting the version on INPA. They'll either work or they won't
@@Stag2997 thank you for telling, turned out to be the yaw rate sensor (aka sensorcluster) in my case if thats why you’re here
@Evan Goyuk, thanks for sharing this HOW-TO video, would this work on the R56 (MINI Cooper S) 2nd gen?
Yes it should
Do you know what option from the main menu of the INPA interface I should select for the R56? All the options I see are BMW specific.
@@EvanGoyuk 99p00
@@EvanGoyukHi, after replacing DSC/ABC module and finished coding, did this steering alignment in INPA, my "4x4" light is still on. 😅
Thank you to tell us
Does this work on e36 compact?
Does the car have to be park or drive
hello when I leave my bmw steering wheel is going to the right, we could not solve what we have done .. does it cause a bad angle sensor?
Thankyou brother
Thanks for these Video's! I tried using INPA to sort this issue on an E82 125i but get the error message "calibration steering angle only with steering wheel balancer" I also tried with tool32 and get the error IFH-0010: DATATRANSMISSION TO CONTROLUNIT DISTURBED. I'm beginning to suspect that something has not installed properly! I've changed the USB port to COM1 and changed the latency to 1. A bit stuck now!
did you solve this?
I wonder if the terminals 7-8 weren’t bridged because in the end I used another diagnostics machine and it worked straight away
smh whenever i try clicking on steering sensor it never connects
Mine only opens for Dsc abs not mk60. 2001 330ci (08/00) tried armen from E46 owners he's not been able to get me anywhere with SAS recal help!
hi my INPA doesn't show F1 option? its has the other but not this one? any ideas?
Did you find this out? I also don’t have f1
PLEASE HELP OR ADVISE : I have problem with my e46 325i /2001
1-Battery light is on
2-transmission faulty light is on
3- I hear a bang when switching from reverse to drive
When I start the car and see this sign faulty transmission , the car can drive on reverse and other gears except for first gear.
If I start the car and sign does not show on dashboard, the car only drives on first gear 35 Km speed max.
Took it to many mechanics and nobody could fix it.
First guy said he fixed alternator and reprogrammed ECM , The second told me to check and change Positon switch which I did today and still problem not fixed .Now they are saying its the alternator which the first guy fixed.
I checked the battery its giving 12.4 V and when car started and I hit Benzin pedal it goes up to 13.9-14 Volt .
I think you may need a new transmission bro, also perfect excuse to manual swap, if it’s not already! Cheers
how does your inpa work with windows 10???
Yes!
@@EvanGoyuk I just found your tutorial, I will download it now :D wish me luck haha
what if the steering wheel is pushing the car to the right side while you’re driving?
alignment tire pressure worn bushings etc but mainly alignment
steering wheel could be off if it was ever removed
Can you do this on Protool without inpa thx
Yes but I don’t think Protool supports this feature for the e46
No such option as compensation routines. INPA 5.06
Thanks for the video. This looks like my problem but in my case the lights come on and off. They disappear when while driving I restart the car.
Another thing is in my case I don't have the shift f4 option. Weird.
I have. A yellow ,A symbol with a arrow on my dash board what could that be
Would impa work on a Mac?
You will need bootcamp or VMware to install windows on your Mac
Evan Goyuk ah great man thanks
@@kouroshtashvishi5031 you can use an app called parallels if you don't want to partition your storage to windows (which you have to do with bootcamp) either on the hard drive or a flash drive. I recommend parallels since you probably wont be using it that often and I'm guessing you don't want to give up storage on your mac
same thing as VMware lol
Ryan L you are 100% correct. Since then I have not installed windows just because of how much space it takes up.
Thank you very much for telling me this app. I will be downloading it today thanks man
Evan can you tell me where we get your software from and how did you get it to work on a MacBook.
I also purchased the CARLY scanner and software ,can it be coded with that?
he forgot to tell you, you need to do this when going 90mph
the trunk release on my e46 coup is not working , it works fine from the FOB but the button under the dash does nothing now,
anyone have any ideas? i am thinking maybe a fuse or i did something when i was coding?
Check both coding options and fuses
Can someone send me this software ?
90% its bad HSR module which new cost 1500 euros. So try to find used one and see that numbers 679.....are the same and you dont need coding. Used modules are around 300 euros. That is among most expencive modules in bmw.
What if my steering angle is 32000 degrees off 💀
Happened when I hit a pothole
So just go on the net and do it
Jy prt net kak. Vokkof
WTF???? That was some mumbo jumbo B.S. sorry to be real with you but it didnt do anything but waste my time
No I show how to reset the steering angle sensor
With a big badass computer. Come on now how many of us have those. The turn of the wheel is what you said. You should make sure these "little tricks" are gonna work before you show us.
@@georgehelton3659 I'm grateful for the video. A computer is just another tool, I can't fault a person for owning a tool that I have yet to buy.
@@georgehelton3659 Big bad ass computer? Man what are you talking about, an average person has a laptop at home, all you have to do is to buy the cable on ebay for 10$ and you're set. Otherwise go to the dealer and get willingfully ripped off smh
salt is strong in this one....
Hello how can I download all inpa into my Mac from a website I have a cd and the d plug but I can’t get it to download software so frustrating
See my video on how to install Inpa
you will need to run parallels or a VM inpa needs windows
Yes