Love the video! Where can I buy a cutting machine like that? I am looking for something better than a hand powered bench device, but not something as big as needed for large scale mfg. I am just a small company, just getting started. Any suggestions appreciated!!
The cutting tool is called "the cutter" and you can purchase one from N & A Harness. Just call Leroy and he will help work out the details...330-359-5823. Thanks Again!
Thanks for asking! You can purchase BioThane directly from our website or other online distributors. Here are some links to help. www.biothane.us/applications/animal/shop-products/buy-a-sample/ www.workinghorsetack.com/biothane-beta-s/1959.htm www.biothane.us/buy-a-sample-roll/ Let me know if this helps, and thanks for your interest!
Great question.. Generally for our Beta PVC products, a surface temp over 700F should be good and higher for our TPU coated products. Most people use a steel hot plate set-up and heat it up with a propane torch. Some are heated electronically. The steel plate should be hot enough to seal in seconds. A quick roll of the edge should be all you need to do! And remember: always make sure you have good ventilation for the smoke and fumes. Hope this helps some. We are planning to do an in-depth video on sealing holes and edges as we get many questions on this subject.
If you use a dunham roller buckle you won't need to make a loop. The buckle has the loop built in.
At 4:11 see how to make a loop for a one and a half inch wide belt..
hi there, where can i buy the heated sealing device? (3:59) and what's it called?
Please contact marlin@strapwarehouse.com and ask him about the sealomatic torches & hood and fans.
Love the video! Where can I buy a cutting machine like that? I am looking for something better than a hand powered bench device, but not something as big as needed for large scale mfg. I am just a small company, just getting started. Any suggestions appreciated!!
Hi Susan, are you taking about the razor cutter that cuts the straight edges?? Thanks for the comment! Aaron
The cutting tool is called "the cutter" and you can purchase one from N & A Harness. Just call Leroy and he will help work out the details...330-359-5823. Thanks Again!
Can it be tooled?
Yes, it can be tooled. Please contact Scott at scott@biothane.us for additional information.
Where can I buy the biothane?
Thanks for asking! You can purchase BioThane directly from our website or other online distributors. Here are some links to help. www.biothane.us/applications/animal/shop-products/buy-a-sample/
www.workinghorsetack.com/biothane-beta-s/1959.htm
www.biothane.us/buy-a-sample-roll/
Let me know if this helps, and thanks for your interest!
what is the best temperature to seal the edges?
Great question.. Generally for our Beta PVC products, a surface temp over 700F should be good and higher for our TPU coated products. Most people use a steel hot plate set-up and heat it up with a propane torch. Some are heated electronically. The steel plate should be hot enough to seal in seconds. A quick roll of the edge should be all you need to do! And remember: always make sure you have good ventilation for the smoke and fumes. Hope this helps some. We are planning to do an in-depth video on sealing holes and edges as we get many questions on this subject.
Does a soldering iron work for sealing the edges?
Thanks for asking. We have not tried a soldering iron to seal edges. If you try this please let us know how it worked out!
At 3:52 Learn how to Heat-seal Holes and Edges.