Dont buy and replace the Boat Outboard Throttle Controls before you watch this video...👌 part number: Mercury Side Mount Remote Control (881170A13, 881170A14)👍
Thanks for the video. I sure wish you had disassembled it and put it back together. I have taken mine apart and it looks just like yours. For the life of me I can't figure out where the brass bushing and the funny shaped plastic plate with three holes in it goes. The rest I have figured out. Some parts just fell out when I removed the back plate. Hope you are still checking this video for comments and you can help me out.
Hi, it's difficult to say much without having seen your controller. But if you've disassembled the controller like I did, there shouldn't be anything falling off unless something is broken or loose. Also, if you've disconnected the wires, some washers and metal pieces might fall off. However, I haven't seen any brass parts inside mine. It's a mix of aluminum and steel parts. You can check out videos that describe the details more clearly and also refer to the manual to see if you can find your part number there. ua-cam.com/video/mdkFnqor-Is/v-deo.html ua-cam.com/video/rYJ-95FJf40/v-deo.html www.parts-marine33.fr/wp-content/uploads/2020/09/BOITIER-LATERAL-HB.pdf God lock👌👍
Also, check the cable. In many cases, there may not be anything wrong, but the cable itself might be stiff or caught, causing the handle to become stiff. You need to detach the cable from the motor and then move the handle to see if it's stuck.
@@ThinkTechnikk Thanks. A smooth small round brass object flat on the top and bottom fell out when I opened up the case. I have a feeling it goes underneath the plate that is bolted to the handle. One day I will figure it out. My controller looks just like yours and I am betting if you took it apart there is a small brass part that fits the description I just gave. Thanks again. The piece I am referring to is about the size of the end of a pinky finger. Thanks again. Let me know if you figure out where you think it may go. Everything else is working as it should but I am afraid to complete the project not knowing where this part goes.
Hello from Canada . I own the exact same shifter on my 2007 legend and all the bolts unscrew but just keep turning and I have no access to go behind . Question do you know if I have the rubber gromets also and should I force slowly with a crowbar like you did . Note I have carpeted wall. Also the reason I want to remove it is only to remove the handle to replace the shifter spring so it locks into neutral and do you know the spring part number Thank you. Great video Regards David
I am not familiar with your boat, but I have done several removals with a crowbar on a similar boat because the bolts were going round. As I showed in my video, most of the bolts are the same because they absorb the vibration from the handle. I recommend slowly pulling out one side to see if the rubber comes out, and then continue with the rest. Don't be afraid to pull a little harder. I am sure the bolts are going round because they are rubber-made nuts. Good luck!
Thank you so much for the video. I bought the same controls for my boat and there was a screw missing so you are awesome to have wrote the specs up. I was also missing the instructions and was wondering if you would be as kind to have a copy that you could even take a picture and email them ?
I just installed 2 used 2 used throttle cables given to me from a friend.. very smooth.. still having issue from inside of control box.. taken apart so many times n lubricated.. still can’t find problem !!
Careful with that drill in those holes. I ran my bolt thru and grounded out a ignition wire, likely killswitch. Couldn't figure why it wouldn't start. Took apart and found bare wired rubbing on bolt.
The part number for the controller is pinned in the first comment, but here it is for you again. part number: Mercury Side Mount Remote Control (881170A13, 881170A14)
G'day mate what is the make and model of that forward control unit I just had mine apart and had to drill it all the bloody Phillips head ones out myself though I completely pulled it apart cleaned it meticulously and greased it mine doesn't have any key switch or trim and tilt but it does have the buttons on the handle so putting it back together the way it should
www.amazon.com/Mercury-Mariner-Control-Throttle-881170A5/dp/B00J9FIA2M Mercury/Mariner Part number: RC 881170a3, revT see video 2:00 Mercury/Mariner OEM Side Mount Remote Control Throttle/Shift 20hp, 25hp Remember check the wire if those tow wires stock, the Throttle Is still hard. to check the wires you should disassemble fram the engine side and test it by moving the Throttle handle Good luck
Dont buy and replace the Boat Outboard Throttle Controls before you watch this video...👌 part number: Mercury Side Mount Remote Control (881170A13, 881170A14)👍
Thanks for sharing 👍 😊 😀 🙂genius idea
Thanks for the video. I sure wish you had disassembled it and put it back together. I have taken mine apart and it looks just like yours. For the life of me I can't figure out where the brass bushing and the funny shaped plastic plate with three holes in it goes. The rest I have figured out. Some parts just fell out when I removed the back plate. Hope you are still checking this video for comments and you can help me out.
Hi, it's difficult to say much without having seen your controller. But if you've disassembled the controller like I did, there shouldn't be anything falling off unless something is broken or loose. Also, if you've disconnected the wires, some washers and metal pieces might fall off. However, I haven't seen any brass parts inside mine. It's a mix of aluminum and steel parts. You can check out videos that describe the details more clearly and also refer to the manual to see if you can find your part number there.
ua-cam.com/video/mdkFnqor-Is/v-deo.html
ua-cam.com/video/rYJ-95FJf40/v-deo.html
www.parts-marine33.fr/wp-content/uploads/2020/09/BOITIER-LATERAL-HB.pdf
God lock👌👍
Also, check the cable. In many cases, there may not be anything wrong, but the cable itself might be stiff or caught, causing the handle to become stiff. You need to detach the cable from the motor and then move the handle to see if it's stuck.
@@ThinkTechnikk Thanks. A smooth small round brass object flat on the top and bottom fell out when I opened up the case. I have a feeling it goes underneath the plate that is bolted to the handle. One day I will figure it out. My controller looks just like yours and I am betting if you took it apart there is a small brass part that fits the description I just gave. Thanks again. The piece I am referring to is about the size of the end of a pinky finger. Thanks again. Let me know if you figure out where you think it may go. Everything else is working as it should but I am afraid to complete the project not knowing where this part goes.
Hello from Canada . I own the exact same shifter on my 2007 legend and all the bolts unscrew but just keep turning and I have no access to go behind . Question do you know if I have the rubber gromets also and should I force slowly with a crowbar like you did . Note I have carpeted wall. Also the reason I want to remove it is only to remove the handle to replace the shifter spring so it locks into neutral and do you know the spring part number Thank you. Great video Regards David
I am not familiar with your boat, but I have done several removals with a crowbar on a similar boat because the bolts were going round. As I showed in my video, most of the bolts are the same because they absorb the vibration from the handle. I recommend slowly pulling out one side to see if the rubber comes out, and then continue with the rest. Don't be afraid to pull a little harder. I am sure the bolts are going round because they are rubber-made nuts. Good luck!
Mercury the Best of the Best outboard engeene in the world ohh yes congratullationsto you Mercury outboard engeene
There's a reason only a small amount of grease is applied to the control linkages.
Thanks for this man! I have the same control and same issue. Will try what you did. Great work!
What grease?
Thank you so much for the video. Good tutorial. 👍👍👍👍👍👍👍
Thanks for the great video
Thank you so much for the video. I bought the same controls for my boat and there was a screw missing so you are awesome to have wrote the specs up. I was also missing the instructions and was wondering if you would be as kind to have a copy that you could even take a picture and email them ?
Excellent work thanks 👌👌👌👌👌👌👌👌
I just installed 2 used 2 used throttle cables given to me from a friend.. very smooth.. still having issue from inside of control box.. taken apart so many times n lubricated.. still can’t find problem !!
This is some serious skill once again! Cool work my guy!
Careful with that drill in those holes. I ran my bolt thru and grounded out a ignition wire, likely killswitch. Couldn't figure why it wouldn't start. Took apart and found bare wired rubbing on bolt.
"Thanks for the fantastic video! Could you please write down the part number of this controller? Thanks again."
The part number for the controller is pinned in the first comment, but here it is for you again. part number: Mercury Side Mount Remote Control (881170A13, 881170A14)
G'day mate what is the make and model of that forward control unit I just had mine apart and had to drill it all the bloody Phillips head ones out myself though I completely pulled it apart cleaned it meticulously and greased it mine doesn't have any key switch or trim and tilt but it does have the buttons on the handle so putting it back together the way it should
www.amazon.com/Mercury-Mariner-Control-Throttle-881170A5/dp/B00J9FIA2M
Mercury/Mariner Part number: RC 881170a3, revT see video 2:00
Mercury/Mariner OEM Side Mount Remote Control Throttle/Shift 20hp, 25hp
Remember check the wire if those tow wires stock, the Throttle Is still hard.
to check the wires you should disassemble fram the engine side and test it by moving the Throttle handle
Good luck
Hi, I have the same control box for my mercury 15 elpt, do you have a 10 second peep everytime you start the engine?
No i do not have., it may be a warning to start the engine
Link to buy sir
Thanks. Good tutorial. Had to turn the volume down though.
how long is those 3 bolts?
111mm
Is this a jet drive?
No it is not:)
When this man discovers WD40 we are all fucked.
🤣
Thanks working good for me👍👌😆
Would prefer dialog with explanation rather than text. Thanks.