Its an easy set up a little confusing if its your first supercharged install but just follow the instructions lol. My brother has an appointment to get it dyno tuned in like 2 weeks ill get an update then
There is no way my 95 explorer could handle that supercharger.. almost 200k on it. She’s a seeper so I’d have to rebuild her to handle it but great idea!
@@matthewrodgers1219 the fact that your engine was built with that SC in mind while the 4.0 was not. The internals with the 200k on it wouldn't handle it, nor do I even want to chance it with my backup vehicle. I most definitely could do it but then I'd really have to rebuild it afterwards if compression was too high. She already leaks oil through seals without it even trying. Lol 🤣 she's a secondary for a reason.
Omg u supercharged a cologne engine I hate pulling and installing those, it's always like trying to stick a rectangle in a square hole, there is always a bolt or nut out of reach. And my hands are almost too big for reaching the harness hold down bolts behind the heads. Pain in the butt. Cool video, great job.
Gracias for sharing your video!I just bought a clean 87 ranger 5 speed short bed.I removed the original 2.3 i4,I have a 4.0 out of a explorer with ported heads and custom cam.I was wondering about supercharing it...I found your video, and my prayer was answered!!Thx for the link and talking the time to make this vid💪👏👊✌Buen trabajo Amigos!!
Thats going to be a sick little slipper you should make some videos on that ranger. And your welcome its not the best video but we try lol. De nada carnal gracias por mirar.
@@Eldela5.0 I will be making vids on this build for sure .I'm finishing up a coyote swap notch back mustang rightnow. Once I'm done I'll make sure to make a 5 to 6 part series on the build.Y si bro ya que este tuned va ser una sleeper for sure lol.Good talking to you bro👊✌
Yea for sure we need it dyno tune but no one around here does anything older then 03 ford so might have to get some email tunes. Jajaja i know what you mean thats why my brother wanted to add the supercharger since the truck been in the family for so long but wanted a little extra power.
if you can figure out a way to get the intake hose off of the oil filler neck you will have a lot better airflow and make better power. think of that little kink as a piece of blockage inside the intake. ill try to think of some solutions for you guys
I just bought a Ford Explorer all because of you guys. Lol I'm kindin but I did buy a 2003 Ford Explorer 3 days ago maybe I should put on that supercharger
No test drive video? Wth guys come on. I’m seriously thinking about slapping this kit on mine with the 5.5 pully, but mine has 330k miles. But I paid $600 for it with a bad trams n rebuilt it. Also came with a snow plow and made thousands last winter. So if she blows I’ll put Morana parts and upgraded bolts in it as well as crank the boost to 7.5 and intercool it. Bam 💥
So i have a 2001 ford explorer sport trac and on the website that you plugged i couldn't seem to find the supercharger it self. So i was just wondering what the model of supercharger this is or the part number
check out the explorerforum you will learn everything about your truck and show off your ride and if you want to go even faster we can help with that to
El modelo del supercharger es un EATON M90 de un thunderbird 94 y lo consegui en ebay USA. Pero pa instalar acupas este kit modd.me/product/97-01-various-rangerexplorerst-installation-kit/
@@Eldela5.0another thing being a 93 Its just obd 1 .. Think foxbody tuning a eecIV . Would need Mega squirt and a tune and alot of custom work. Honesty an eBay turbo mounted under the bed would be right up this POS rangers alley
Fuel pump came with modbox kit and don't remember exactly on the injectors and it was tune with sct x4 tuner modd.me/product-category/superchargerkits/
I'll be amazed if you guys get that thing running you're not supposed to use silicone on an intake manifold that will eat up your catalytic converter eventually es muy Malo
Nice video guys, maddbox says to get this supercharger you must put 91 Oct gas in the car? Is that true? I live in Venezuela and we barely have 80 Oct gasoline😟 and I was planning to put this set on my explorer 2004 4.0 V6 😭
So I have a question with the belt. Did you have to get a bigger/longer belt or stay with the stick one? If so I would like to know high belt because I’m getting the same kit for my 1999 Ford Explorer sport
Did you have to put a longer serpentine belt or did you use the same one?. I got a 2007 ford explorer v6 and want to the setup also. Seen this video a couple of times and real excited to get it done,Let me know.
Nice...I have the full kit here waiting for me to rebuild the engine for my 03 Ranger FX4. Will be a bit easier with the engine bay clear, methinks. Also be running water/methanol and have my tuner. LOTS of other mods, too. (radiator, ABS delete, front locker, oil cooler, power steering cooler, Exploder rear axle swap, HID retrofit, etc, etc, etc) She's my overlander, so....yeah.
@@Eldela5.0 I have a couple Dyno shops here in Portland, Or I have yet to talk to, I do have a baseline tune off the ModdBox website to get the engine started when I've got it together. Engine will be mostly stock, will get a light port/polish, upgraded MAF, and Ford Racing injectors. I have the 9.5lb pulley. I am hoping for ~300BHP, though I think I might be being too optimistic, but want I want more is just the torque. Big tires and low gears are never gonna race. lol
@@MrAcuta73 thats nice having dyno shops around but all shops i talk too only do 03 and up. And you should be able to get 300 with all that i have a 3psi pulley and 9 psi aswell
@@Eldela5.0 03 and up would be good by me! Worst case, if they want a newer brain, I'm not afraid to pull a donor from a junkyard and have it flashed (or flash it myself, I have the box...and I'm a bit of a computer nerd, updating firmware isn't a challenge). 300+ at the crank should be easy, it's what I get at the drivers that I expect to be disappointed. Low gearing, large and heavy E-rated AT tires...add to that my truck is just heavy with the basic overlanding kit installed, and promises to get heavier with a full loadout.
@@Eldela5.0 so what if turbocharger is used instead let say twin turbo? Would that increase or decrease the fuel consumption or would it stay the same?
Just bought the moddbox kit and super charger for my sport trac. The little 4.0 is not strong enough to turn 35” tires and extra weight on my truck. Did you also upgrade the fuel pump in the tank?
Nice it should give it the extra power to move them 35"s. And yea we did upgrade fuel pump it came with the kit but we started recording after we had the fuel pump done.
@@Eldela5.0 nice I’ve looked and can’t Sean to find one unless I find a super coupe part out .. I think I’m going to be the first one to coyote swap a second gen Ford Explorer 🧭 🤔 I have a 98 I just bought for dirt bag cheap cause the catalytic converters were stolen .. really straight body to that rare grey
It came off a 93 ford Thunderbird and i got the links for the adapters but they are from moddbox they have the whole kits for a few different cars ans trucks and thanks
@@Eldela5.0 wait, you are telling me that thing is the same old eaton M90 that came too in Pontiac Grand Prix? I have a 2003 Explorer that nearly don't use... And I have made a few conversions on GM, but never think about making something like this... util now. (You can answer in Spanish if is easier for you, I'm Puertorrican).
@@ivanarrache5154 yea its M90 Eaton supercharger this one came off from a 90s Thunderbird and yea I believe gm used them on their grand prix gtp. Iam not sure if they bolt the same but give moddbox and email too make sure.
@@Eldela5.0 I can tell you they are the same, just change in the housing, happens the same with the Mercedes Benz and Holden ones. I have made a few conversions of them in Fieros and one time I put one (M90) in a Land Rover 4.6 maybe when all this thing of the Corona Virus ends I can start doing that with the Explorer. How much the adapter kit cost?
Hola amigo, soy de Mexico y tengo una igual, se que son de USA no se si me podrían ayudar en una duda,. Dice en el link que cuesta 1,999 el kit, sería dólares o pesos mexicanos?
Bd jovenasos tengo un ranger98 y quiero hacer algo similar pero mi motor es 4 cil 8 bujías alguna parte donde pueda conseguir y que consejo me pueden dar para que quede perron
hola, gran video, unico video que encuentro donde usan la sport trac, con muchas ganas de ponerlo en la mia, la tengo hace poco, se nota mucho la diferencia en relacion de stock?
5.0 beast had a couple questions about putting super charger on 4.0 sohc explorer. Interested in doing it myself was just interested in how it actually worked out
i'm planning on using this same kit on my 2008 v6 mustang, same engines. Great video guys
Its an easy set up a little confusing if its your first supercharged install but just follow the instructions lol. My brother has an appointment to get it dyno tuned in like 2 weeks ill get an update then
What super charger fits my mustang v6 2008 4.0?
@@victormeza9532 ive only seen kits for the eaton M90.
@@Eldela5.0 how fast is it like 0 to 60
We havent really tested for that but it feels much better then stock.
There is no way my 95 explorer could handle that supercharger.. almost 200k on it. She’s a seeper so I’d have to rebuild her to handle it but great idea!
I have a 3800 with supercharger 250,000..e mine ..what's the problem
@@matthewrodgers1219 the fact that your engine was built with that SC in mind while the 4.0 was not. The internals with the 200k on it wouldn't handle it, nor do I even want to chance it with my backup vehicle. I most definitely could do it but then I'd really have to rebuild it afterwards if compression was too high. She already leaks oil through seals without it even trying. Lol 🤣 she's a secondary for a reason.
Sheeesh my has 228000 thinking about adding some things but don’t want to risk it
@@joseandiel1586 hey a seeper is a keeper. Lol that's what I've always been told. Pretty much run it till it doesn't run no more.
@@AdamAve93 definitely!!! Might make it to the 300k with proper maintenance… 🙏🏽
Omg u supercharged a cologne engine I hate pulling and installing those, it's always like trying to stick a rectangle in a square hole, there is always a bolt or nut out of reach. And my hands are almost too big for reaching the harness hold down bolts behind the heads. Pain in the butt. Cool video, great job.
Yea those engines are a really tight fit to work on anything imagine getting the rear bolts to the supercharger
I need this for my AWD 4.0 aerostar van !!!
You get it?
Please man please just please
Thank you guys for confirming that this can work!!!
Your welcome.
Thanks for the video, was trying to figure out how to upgrade out of the plastic intake manifold.
Gracias for sharing your video!I just bought a clean 87 ranger 5 speed short bed.I removed the original 2.3 i4,I have a 4.0 out of a explorer with ported heads and custom cam.I was wondering about supercharing it...I found your video, and my prayer was answered!!Thx for the link and talking the time to make this vid💪👏👊✌Buen trabajo Amigos!!
Thats going to be a sick little slipper you should make some videos on that ranger. And your welcome its not the best video but we try lol. De nada carnal gracias por mirar.
@@Eldela5.0 I will be making vids on this build for sure .I'm finishing up a coyote swap notch back mustang rightnow. Once I'm done I'll make sure to make a 5 to 6 part series on the build.Y si bro ya que este tuned va ser una sleeper for sure lol.Good talking to you bro👊✌
Thats another sick project. Ill be waiting on them vids. Igualmente ai tamos
I love the background Mexican music dude
You guys really need to dyno tune this! I’ve been wanting to do this for quite a while. My Explorer is painfully slow compared to newer vehicles.
Yea for sure we need it dyno tune but no one around here does anything older then 03 ford so might have to get some email tunes.
Jajaja i know what you mean thats why my brother wanted to add the supercharger since the truck been in the family for so long but wanted a little extra power.
5.0Beast you get a tune yet ?? Grab a SXT tuner those have pre-tunes already installed
@@bobayagga2233 havent yet i was going to get it done this month but the tuner been busy
5.0Beast naw , buy the tuner yourself , look on OfferUp . Under $100 bucks
@@bobayagga2233 we do have the SXT tuner already.
Where the driving video at never was uploaded I want to see what it’s about how it sounds and everything
Will have one soon just been super busy at work lately havent had a chance.
5.0Beast hell yea bro you should up load more man would be sweet to see more videos
Yea ill try too as soon work lets me.
if you can figure out a way to get the intake hose off of the oil filler neck you will have a lot better airflow and make better power. think of that little kink as a piece of blockage inside the intake. ill try to think of some solutions for you guys
I'll look into that. And thanks letting us know a little extra power doesn't heart jajaja
Helpful video guys, se la rifaron chingon now just need to see some results before I do it to my ranger.
Gracias si quedo bien we are just getting a dyno tune soon pa que aremange mejor pero se siente la diferencia.
Definitely blew up by that evening...
It's still running lol but not as fast I we thought is was going to be.
It runs. 👍👍
Now it's time to blow it up. 🤓
I love that song!
Good job fellas 👏 👍 👌
You've got to have enough power to get the family up those steep hills that's how I justy it LoL
Ofcourse specially if leave in Colorado lol
I just bought a Ford Explorer all because of you guys. Lol I'm kindin but I did buy a 2003 Ford Explorer 3 days ago maybe I should put on that supercharger
Jajajja thats cool they are great trucks and it will make it move and little better for sure
Wish you would have filmed more of the install.
Yea me too sorry I just keep forgetting to turn on camera lol
No test drive video? Wth guys come on. I’m seriously thinking about slapping this kit on mine with the 5.5 pully, but mine has 330k miles. But I paid $600 for it with a bad trams n rebuilt it. Also came with a snow plow and made thousands last winter. So if she blows I’ll put Morana parts and upgraded bolts in it as well as crank the boost to 7.5 and intercool it. Bam 💥
Not bad pretty good.. keep up the good work 😊
Thanks iam trying still got a lot to learn.
De Que Tipo De Carro Le Pusieron Ese Super Charger A La Ford Explorer Sport trac 4.0
O Donde Lo Compraron Les Quedo Chingon Pleves Se Aventaron.
Es un supercharger de un 94 ford thunderbird pero nesesitas el kit pa asentar el supercharger de modbox.
Y gracias viejon ai le asemos la lucha
So i have a 2001 ford explorer sport trac and on the website that you plugged i couldn't seem to find the supercharger it self. So i was just wondering what the model of supercharger this is or the part number
The supercharger it's from a 95 ford thunderbird believe it's an m90
Update video? I would love to know how it drives? Thinking of supercharging a 4L Dodge Nitro
I'll try to get a video ones I can borrow it from my brother
@@Eldela5.0 you never did lol
No I haven't truck is down for a fuel pump and brother been working a lot.
What are the torque specs for this job? - We don't need no stinkin torque specs...
check out the explorerforum you will learn everything about your truck and show off your ride and if you want to go even faster we can help with that to
I been looking at the forum a lot off good info about the project. Thanks for the link
Message me a link please.
www.explorerforum.com/forums/index.php?threads/supercharger-install.478645/
This is the moddbox instructions modd.me/howtos/4-0l-v6-cologne-supercharger-kit-install/
Hey Donald were are you guys tuning your explorers i cant find anyone here in denver that will do a dyno tune on sct tuner?
Where is the videos driving this joker! I have one and want to see it in action
It's down at the moment I believe fuel pump went out lol.
I bet you that the timing chain had a ball playing hop scotch after that 8lb boost
So far so good after around 5k miles on install
would of liked to find out if it worked
Yea it did work it has better pick up but not a race truck lol.
the paisa special. gonna do the same on my 4.0 ranger
You should you will be piling tires for days jajaja
5.0Beast gonna be a sleeper for sure jajaja
@@flamigo742hell yea especially in a ranger way lighter then the sport trac.
Que modelo es supercharged ...yo tengo una explorer 4.0 4x4 aut 97-98. Donde puedo conseguir supercharged en EUA... Ebay ? O Mercadolibre ...Mexico?
El modelo del supercharger es un EATON M90 de un thunderbird 94 y lo consegui en ebay USA. Pero pa instalar acupas este kit modd.me/product/97-01-various-rangerexplorerst-installation-kit/
Sir I have a question, you change the computer or made a modification in the hardware or software or just leave the original ?
Just an email tune.
I wish the BBK blower was still around for the pushrod 4.0
I've got a 4.0 2wd ranger with a manual trans...begging for more POWER
Should do the moddbox blower will make that 4.0 pick up faster
@@Eldela5.0 My 1993 4.0 is the ohv not ohc. same used in 1st gen explorers and aerostars, intake plenums and heads are different
Ok I thought you had a 99 or newer 4.0. Can always check ebay or forums for one
@@Eldela5.0another thing being a 93 Its just obd 1 .. Think foxbody tuning a eecIV . Would need Mega squirt and a tune and alot of custom work. Honesty an eBay turbo mounted under the bed would be right up this POS rangers alley
@@theejoeyleeyea that's the hard part on ob1
Did you install s ECM? Fuel pump ?, injectors
We did fuel pump and injectors
@@Eldela5.0 what kind of injectors and fuel pump, ??? and what about ECM its stock? .. i want put this supercharger in my sohc 98” explorer
Fuel pump came with modbox kit and don't remember exactly on the injectors and it was tune with sct x4 tuner modd.me/product-category/superchargerkits/
nice did you made any tuning or just install and ready to use?
You need to install and drive like 500 miles then get tuned.
@@Eldela5.0 did you get it tuned?
I'll be amazed if you guys get that thing running you're not supposed to use silicone on an intake manifold that will eat up your catalytic converter eventually es muy Malo
It's still running surprisingly lol it's been on over a year. And the silicone came with kit and instructions.
Nice video guys, maddbox says to get this supercharger you must put 91 Oct gas in the car? Is that true? I live in Venezuela and we barely have 80 Oct gasoline😟 and I was planning to put this set on my explorer 2004 4.0 V6 😭
Thanks and Yea you need premium 91 Oct gas
whats the name of the supercharger and will it fit my 2003 mercury mountaineer v6?
Supercharger it's from a 94 thunderbird and the kit it's from moddbox
Will that supercharger fit 3rd gen Ford Rangers???
Iam not sure. Check out moddbox website
Did you all do a afterwards video to see how it runs and sounds
So I have a question with the belt. Did you have to get a bigger/longer belt or stay with the stick one? If so I would like to know high belt because I’m getting the same kit for my 1999 Ford Explorer sport
I believe kit came with a longer belt already.
Did you have to put a longer serpentine belt or did you use the same one?. I got a 2007 ford explorer v6 and want to the setup also. Seen this video a couple of times and real excited to get it done,Let me know.
Yea you need a longer serpentine belt but it comes with the kit i bought.
@@Eldela5.0 good looks
@@xaviermarquez1045 thanks
Nice...I have the full kit here waiting for me to rebuild the engine for my 03 Ranger FX4. Will be a bit easier with the engine bay clear, methinks. Also be running water/methanol and have my tuner. LOTS of other mods, too. (radiator, ABS delete, front locker, oil cooler, power steering cooler, Exploder rear axle swap, HID retrofit, etc, etc, etc) She's my overlander, so....yeah.
Thanks and who you using for tuning? You going to have a nice sleeper for sure and are you building your engine or just stock rebuild
@@Eldela5.0 I have a couple Dyno shops here in Portland, Or I have yet to talk to, I do have a baseline tune off the ModdBox website to get the engine started when I've got it together. Engine will be mostly stock, will get a light port/polish, upgraded MAF, and Ford Racing injectors. I have the 9.5lb pulley. I am hoping for ~300BHP, though I think I might be being too optimistic, but want I want more is just the torque. Big tires and low gears are never gonna race. lol
@@MrAcuta73 thats nice having dyno shops around but all shops i talk too only do 03 and up. And you should be able to get 300 with all that i have a 3psi pulley and 9 psi aswell
@@Eldela5.0 03 and up would be good by me! Worst case, if they want a newer brain, I'm not afraid to pull a donor from a junkyard and have it flashed (or flash it myself, I have the box...and I'm a bit of a computer nerd, updating firmware isn't a challenge). 300+ at the crank should be easy, it's what I get at the drivers that I expect to be disappointed. Low gearing, large and heavy E-rated AT tires...add to that my truck is just heavy with the basic overlanding kit installed, and promises to get heavier with a full loadout.
@@MrAcuta73 yea thats what they told me they can do it but need to change engine harness and ecu
When using the kit was it pretty easy installing and did you have to get it tuned.
It was kind of easy just time consuming for being the first time. And yea you need it tuned but after 500 miles of letting everything settle.
Wait so if you install a super charger you don’t need a tune or nothing else ? Just plug it in and go ?
You gotta drive it just like that with no tune for 500 miles to let everything settle down and then get a custom tune.
Del interior del motor, necesitaron modificarlo o fue solo el kit ??
Solo fue el kit el motor esta original
@@Eldela5.0 les quedo chingon, no sabia que se podría con motor de fabrica.
Si se puede nomas que no aguanta tantas psi.
So does it increase the fuel consumption or it stays the same?
It increases but also depends if you step on it more lol
@@Eldela5.0 so what if turbocharger is used instead let say twin turbo? Would that increase or decrease the fuel consumption or would it stay the same?
I'm wanting to do this to my 97 XL ford explorer manual 4.0 efi
It will make it some quicker to pick up for sure. Dont expect a race truck lol
Alright man serious question I have a 2000 5.0 V8 Eddie Bauer AWD and I want a supercharged it will be the best one like Wayland or something else?
Just bought the moddbox kit and super charger for my sport trac. The little 4.0 is not strong enough to turn 35” tires and extra weight on my truck. Did you also upgrade the fuel pump in the tank?
Nice it should give it the extra power to move them 35"s. And yea we did upgrade fuel pump it came with the kit but we started recording after we had the fuel pump done.
Where do I get the super charger from ?
We got this one from ebay.
@@Eldela5.0 nice I’ve looked and can’t Sean to find one unless I find a super coupe part out .. I think I’m going to be the first one to coyote swap a second gen Ford Explorer 🧭 🤔 I have a 98 I just bought for dirt bag cheap cause the catalytic converters were stolen .. really straight body to that rare grey
@@Eldela5.0 oh ☝🏽 and lowered on “19 black saleens
Can you pleaaaaseee make a video of the sound and the speed like 0-60 thanks so much
Yea I'll try to get it from my brother some time.
@@Eldela5.0 that would be sick I have the same vehicle and want to see the performance upgrade with this
What did the supercharger come off of originally and where do u get the adapter plate and info? Looks badass
It came off a 93 ford Thunderbird and i got the links for the adapters but they are from moddbox they have the whole kits for a few different cars ans trucks and thanks
@@Eldela5.0 wait, you are telling me that thing is the same old eaton M90 that came too in Pontiac Grand Prix? I have a 2003 Explorer that nearly don't use... And I have made a few conversions on GM, but never think about making something like this... util now. (You can answer in Spanish if is easier for you, I'm Puertorrican).
@@ivanarrache5154 yea its M90 Eaton supercharger this one came off from a 90s Thunderbird and yea I believe gm used them on their grand prix gtp. Iam not sure if they bolt the same but give moddbox and email too make sure.
@@Eldela5.0 I can tell you they are the same, just change in the housing, happens the same with the Mercedes Benz and Holden ones. I have made a few conversions of them in Fieros and one time I put one (M90) in a Land Rover 4.6 maybe when all this thing of the Corona Virus ends I can start doing that with the Explorer. How much the adapter kit cost?
@@ivanarrache5154 that's good to know and conversion kit was around 2k
Hola amigo, soy de Mexico y tengo una igual, se que son de USA no se si me podrían ayudar en una duda,.
Dice en el link que cuesta 1,999 el kit, sería dólares o pesos mexicanos?
Que dise amigo. Si son dolares estaría chingon que fueran sido pesos.
Will this hurt a stock 2005 4.0 engine
With any performance part your taking risks hurt an engine.
How is the car going guys.. I am planning to put it on my disco 3
We doing good and you. An it will help it move a little faster but won't make it a race truck lol
Do u need something else like bigger injectors or different maf sensor??
We did bigger injectors and fuel pump and maf sensor from a mustang gt
What about ecu? Did u need reprogramming?
You need to run it in stock tune for 500 miles and then you can get a tune for it with stock ecu
Now that Ford Exploder can really explode!
Its been on over a year and still running lol
I have a 2001 how can I turn mines. Like this
Yea you can get it done it will give it a little bit more power it won't be a race truck though lol
Where do I get to purchase a supercharger online ?
Brother found it on ebay
glad you used the rubber hammer video would of probably ended early had you used the steel hammer
Yea we were reading instructions like 10 times before doing something since it was the first time doing it.
Is it possible to supercharge ford explorer V6 xlt SUV
It is modbox sells a few different kits. modd.me/product-category/superchargerkits/
hola, me podrias ayudar en darme el codigo del kit del supercharger para colocarlo en una explorer sport trac 2001,
modd.me/product/97-01-various-rangerexplorerst-installation-kit/
Ai esta el link nomas necesitarías un supercharger m90 de un thunderbird
Bd jovenasos tengo un ranger98 y quiero hacer algo similar pero mi motor es 4 cil 8 bujías alguna parte donde pueda conseguir y que consejo me pueden dar para que quede perron
La verdad no sabria desirte por que no asen este kit pa 4 cilindros
Can this be done on a 2007 gen 2 sport trac 4.0 sohc cologne v6 2 wheel drive
You should be able check out the moddbox website.
Será lo mismo para una ranger 93???
Creo que es diferente generation de motor.
curious as to what you did with the bypass valve hose. did you leave it on the bypass valve or tap it into the intake side of the plenum?
I believe it goes into the moddbox intake manifold with an elbow ill double check.
Hello, i have the same car, which supercharger is this and from where can i order one
What ever happened with the tune?
He never found anyone who wanted to or could tune locally.
@@Eldela5.0 it still hauled ass tho or did you guys take it off lol
It's still on and doesn't really hauled ass but pulls better then stock lol
Does your brother still own this? How has it ran after the install?
hay alguna forma de adaptar el supercharger del thunderbird 3.8 o cualquier otro al 4.0 del mustang 2005?
Chequea en moddbox.com eyos asen adaptadores para diferentes 4.0 ai agaramos este kit.
@@Eldela5.0 gracias, saludos
Por nada saludos
@@Eldela5.0 crees que haya problema si fabrico mi propio kit?
No creo con que sepas lo que ases aunque estaría más fácil fabricar un turbo kit que el supercharger
Will it drink alot more gas now? I wanna do this or just install a 5.0 Also, do you have to change the drivetrain, transmission, or drive shaft?
Defintly gonna need a stronger fuel pump and bigger fuel injectors
Were there any issues where you guys had to improvise? IM contemplating getting this kit for my Mustang.
It was just minor stuff but most of it plug and play
How does it handle w/o a tune?
@@xX-Expendable-Xx it handles good just cant feel much power difference. But it still peels the tires
@@Eldela5.0 Were you able to get it Dyno-Tuned yet?
@@xX-Expendable-Xx not yet had an appointment but everything going on had to change date
i have a 5.0 v8 2000 cammed with an exhaust should i supercharge it or turbo it
It all depends if you want instant power or at top when you hit boost.
I want this for my ranger!! can i do it in one day? Looks great fellas ill be looking for your updates!
Yea it can probably be done in a day as longest you have all the parts already. And thanks ill try to get some updates soon.
Que marca de kit de distribución usan así súper cargada ?
La compania se llama modbox
What where the results? Thanks guys
Well everything seems to be working good just need to take it and get it dyno tune to get best results.
What other upgrades are needed before installing a supercharger?
All we did was injectors and fuel pump everything else is stock.
@@Eldela5.0 what about a tune?
Yes forgot most important part lol
Check out modd.me/product/97-01-various-rangerexplorerst-installation-kit/
where did you get the spacer between the engine to adapt the blower,if that is as a kit where did you get it?
hola, gran video, unico video que encuentro donde usan la sport trac, con muchas ganas de ponerlo en la mia, la tengo hace poco, se nota mucho la diferencia en relacion de stock?
No ws mucho la diferencia para 3 mil baros
@@Eldela5.0 entonces seria una mala inversión?
5.0 beast had a couple questions about putting super charger on 4.0 sohc explorer. Interested in doing it myself was just interested in how it actually worked out
It's still running lol and it made pick up some what quicker but not a race truck lol and we never got it dyno for numbers lol
Are you able to use lower octane gas or
do you need to use 91 octane gas?
You gotta use 91 octane.
Perrona la musica saludos
Saludos y gracias
a little overkill on rtv but i like the project
Yea a bit too much hahaha. First doing it we wanted to be safe. And thanks
Cartoon Hammer @3:41
🤣
It's been a little over a year now. How's it running?
Its still running lol
What's name the supercharger?
Eaton supercharger from a 94 thunderbird.
Que onda vatos puedo hacer eso en mi ranger 4.0 sohc 2002 y como ordeno el super charguer???
Si se puede y puedes ver los kits en moddbox.com
Can we please get some more videos of this explorer?
Sure will have some more let me just get tune.
@@Eldela5.0 hell yeah brother!
Would this super charger work on a 4.2L v6 on an F150?
I don't think so but check out the link on the description.
Update? Thinking about this on my 05 stx
Everything been working good. Just been busy at work hopefully can do an update soon
Where did you get the supercharger from???
I found it on ebay and link for the kit is on the descriptions.
What type of super charger is that
It's a Eaton m90 from a 93 thunderbird
How much and were can I order that supercharge
Would this fit on a 05-09 mustang 4.0? If so what would be the gains?
Check the modbox.com website they have different kits
Do you think I could do this to my 2003 v6 soch explorer?
Where do you get the head unit??
Man is there a covid update on this vehicle?? I’m trying to talk my wife into letting me put a 32 valve in hers but no luck so this is next. 😂
How was the performance for him afterwards??
A little better pick up but not a race truck lol
Would this work on a 2002 ford explorer 4.0l sohc 4 door
Yea thats were i got the idea from but its all same engine.
@@Eldela5.0 what's the name of the kit or brand???
Its from moddbox.com
@@Eldela5.0 thanks man
Your welcome.
Sele podra instalar a una f150 v6 4.2l y donde consigo los adaptadores. Y despues de esto si pasara el smog? gracias amigo.
Yo digo que alomejor si chequea la website modd.me/
Did you do a dyno tune and how much power did you gain
I have an appointment for dyno tune ill update results.
@@Eldela5.0 what are the results
We never got it dyno tuned but it help it pick up better
Is this the same fitments as the 4.0 2005 mustang?
Its a little bit different but check the link they also have same kit for mustangs.