If you run stock injectors then that’s why the fuel plate mod didn’t do as much as you would expect. Stock injectors can only shoot so much fuel. You need injectors that can handle the fuel delivery.
Great channel. I noticed you installed the cammed shaft washer incorrectly on re-assembly. The washer should go in between the housing and metal tab spacing the tab out slightly. Easy to do, I am not sure what difference it will make but I know it belongs under the tab.
Informative! My 97 12v cummins has a 4" exhaust front to back and a aftermarket air intake. It blows an insane amount of smoke and is pretty dang fast compared to stock. I'll have to take a look at the AFC now to see if that's been tampered with. You've got my follow.
The billet tappet cover would be a nice edition as they are o-ring sealed and most are tapped for breather ports if you plan on big power. As for the timing cover the only need for the billet one is if you are putting an adjustable drive gear on the injection pump to make adjusting the timing much easier when adding power mods.
I think if you do your tappet cover, you may have to pull the fuel pump, kind of a big job. Also have to be careful not to throw off the timing. Don't quote me thought, I haven't tinkered with my 96 for a few years now. Anyways keep up the mods!
Looks like your having fun. Great. I'm really enjoying your channel. Invest a little in gopro mount and take note of your audio also. Gets muffled at times. This old man looks forward to your videos, my friend. Aahhh youth.
I bought a stock 1997 2500 last year. Drove it for a week wondering how anyone could tolerate the anemic performance. Mine still has the factory fuel plate in, but I pushed it all the way forward, modded the AFC, turned the star wheel, installed a boost elbow, and installed a pyrometer and a boost gauge. Major difference. Rarely do I get any smoke, and I like it that way....it means I'm not pumping excess fuel($$$) out the tailpipe. Unless you've already upgraded the clutch, it isn't going to last long with any added power. Mine is getting an upgraded clutch and some upgrades to the NV4500 in the next couple of months. After that, I can toss some real power upgrades at the cummins.
I know this is an old video but for anyone using this video for a reference to tune their AFC the nut for the diaphragm should not be that tight. Only need to tighten it until the rubber starts to squeeze out a little bit or you will tear it. Also the really thin washer goes between the housing and the flat piece that comes off the rod that holds in the AFC foot.
I read comments, you didn't ruin shit. good video, truck sounds great, i will do the same with my 97 12v. wish my rockers were as rust free as yours. Those engines handle 500hp like it's nothing. around 300 is still very mild , they are so undertuned stock. Over a thousand hp tho stock parts may scatter
Going to do this mod precisely how you did it. Have a 95 12valve. If you could estimate how much power was added, how much do you think it changed it? I’m ok with some smoke or no smoke either way. Just a little increase in power...
Should by gauges to see how hot ur egts r getting, although with a manual trans ur egts won’t get that hot, also boost gauge and fuel press. Love the videos!
Hey just like an FYI that black netting thing on your upper radiator hose is supposed to be where it stops your oil fill cap from rubbing against your upper radiator hose. My buddy took his off and his cap rubbed through hose and he was stranded.
great video better than most on the details of how its done than most others. i bet someone was in that timing cover looks like orange silicone around it.
Loving this cummins build.. Look forward too watching your vids everyday, teaches me a lot on things.. What can I do to my 7.3 powerstroke too get some added horsepower and a little smoke show without spending money any easy mods?
Gavin Ward get a TS 6 position chip from thoroughbred diesel or any other reputable diesel supply company, and make sure you habe adequate exhaust and intake, you'll love it.
Bull, black smoke doesnt = hp/tq . Diesels are lean burning engine . When some one understands what that means they will understand fuel = power in the simplest terms . But it gets complicated making the engine live with more fuel. If you have black smoke at full boost your making power.
Get a Napa 6637 or a wix 46637 air filter, fits on the stock intake hose and will give a little more horse power, the all Napa filters are made by wix they just don’t use the first number of the wix part numbers
Do a 0-60 test! my 99 24v runs does it in about 9 seconds. lol i am interested to see what it your truck will do before and after you do these upgrades!!!
What I did with my 12v was ordered a new fuel pin and Governor spring from I think extreme diesel and turned the fuel up and it rolled like no other man
I did this step by step how you did it and. It blows zero smoke. It used to blow smoke now it don't. I'm lost lol. I've been a diesel mechanic for 5 years but ive never messed with any p-pump mod.
That's what I want to do to my 94, i already have methanol injection., twin ram intake (banks)stage 3 injectors air raid filter and 4 inch exhaust.wouldnt trade my 12 valve for 10 chevys or fords.,but mine dont smoke ,thanks for the info.
Just my opinion- If you're going to do anything billet, I think you should take the engine out, clean/degrease it and rebuild the whole thing to get it ready for high HP mods like you say you're getting so the engine is ready for anything you throw at it.
The internal damage cause but dumping fuel in a diesel engine can cause excessive amount of oil burn pre detonation excessive amount of wear on pistons rings and dangerous amounts of carbon build up on intake and exhaust valves so rolling coal is stupid and can cause you to replace an engine Sooner
Concerning the whole black smoke means no power deal, at the present moment that happens, that is true but ideally, the truck should produce a healthy, thick cloud at the beginning of acceleration then clear up real quick. Means you’re getting the most amount of usable fuel into the engine.
You meant billet manifold plate not tappet cover that's on the side of you block sir sweet vids tho I'm doing just about the same exact build as you so it'll be cool to see what parts you go with keep up the awesome vids man
too much smoke, you have way more potential for power with less smoke too. rolling coal is wasting fuel, which is throwing away power. clean it up abit and youll get more power
dont damage your truck by rolling coal though, its not good for a diesel in a lot of cases and it can be costly to fix. i have a Jetta TDI and i liked that it could roll coal....for about a week. after that it was annoying leaving a trail behind me of smoke
If anyone does this and they remove the tanperproof bolts take them to your local hardware store and get replacement bolts that way you don't have to worry about them coming loose or worse stripping off :)
LOUD 'N' PROUD I'm surprised that you actually responded😂I'm a really big fan & I think that it's amazing you even take my opinions into consideration 😂
Just started watching your channel. I have a 96 3500 12 valve with 202,000. Are the airbags worth getting? Looks like I found a new channel to subscribe to!
If you run stock injectors then that’s why the fuel plate mod didn’t do as much as you would expect. Stock injectors can only shoot so much fuel. You need injectors that can handle the fuel delivery.
These are the type of videos I love to see!!
Alex Nees half to hear that!
Great channel. I noticed you installed the cammed shaft washer incorrectly on re-assembly. The washer should go in between the housing and metal tab spacing the tab out slightly. Easy to do, I am not sure what difference it will make but I know it belongs under the tab.
Informative! My 97 12v cummins has a 4" exhaust front to back and a aftermarket air intake. It blows an insane amount of smoke and is pretty dang fast compared to stock. I'll have to take a look at the AFC now to see if that's been tampered with. You've got my follow.
Great videos man keep up the good work you and Greg A are number one!!!!!!!!
Gotta love a 12 valve. Easy power, plus some smoke great video!
Gotta love Ole mechanical engines. Let's see how she does with some real performance parts now!
Daniel Robinson there will be a lot done soon!
The billet tappet cover would be a nice edition as they are o-ring sealed and most are tapped for breather ports if you plan on big power. As for the timing cover the only need for the billet one is if you are putting an adjustable drive gear on the injection pump to make adjusting the timing much easier when adding power mods.
Please get a go pro window mount would love to see some in truck reactions and how it sounds in the cab and everything love the vids keep them commin
Great to watch a young guy having SO MUCH FUN with the BEST TRUCK EVER !!! Thanks Papa T
Hello I love your channel.. you should do a leveling kit and bigger tires
Ronnie Sandoval add a leaf spring in the back tooooooooo lol 😂
I think if you do your tappet cover, you may have to pull the fuel pump, kind of a big job. Also have to be careful not to throw off the timing. Don't quote me thought, I haven't tinkered with my 96 for a few years now. Anyways keep up the mods!
Hey love you truck man. l have a 24 valve and I am working on fixing it up. This a perfect Chanel for reference. will always support you!!!!
Sweet video man! Cool seeing things starting to go with the project on the truck.
Looks like your having fun. Great. I'm really enjoying your channel. Invest a little in gopro mount and take note of your audio also. Gets muffled at times. This old man looks forward to your videos, my friend. Aahhh youth.
Hoss I had mounts but lost them lol... I’ll buy more.. and yeah there’s a spot or 2 where the mic was acting up
Hoss make a UA-cam channel hoss !
billet tappet cover def worth it, if you plan on making more power. timing cover is just cool looking lol
One of the better explanations that I've seen so far.
Good god , that truck sounds amazing running down the road
Caleb H it screams now lol that 5” to 8” tip and that added fuel 😎
I bought a stock 1997 2500 last year. Drove it for a week wondering how anyone could tolerate the anemic performance. Mine still has the factory fuel plate in, but I pushed it all the way forward, modded the AFC, turned the star wheel, installed a boost elbow, and installed a pyrometer and a boost gauge. Major difference. Rarely do I get any smoke, and I like it that way....it means I'm not pumping excess fuel($$$) out the tailpipe.
Unless you've already upgraded the clutch, it isn't going to last long with any added power. Mine is getting an upgraded clutch and some upgrades to the NV4500 in the next couple of months. After that, I can toss some real power upgrades at the cummins.
I know this is an old video but for anyone using this video for a reference to tune their AFC the nut for the diaphragm should not be that tight. Only need to tighten it until the rubber starts to squeeze out a little bit or you will tear it. Also the really thin washer goes between the housing and the flat piece that comes off the rod that holds in the AFC foot.
I just realized I have been watching your videos for 5 months now
Same
Awesome video! I'm a diesel Mechanic and I didn't even know this
you should buy and install an AFC live. lets you control your fuel rate and power from your cab its about 300-600 for a good one.
I'm curious to see what wheels and tires will do to the overall appearance of this thing. Keep up the cool vids!
Sweet 2 videos just sat down to watch the video from yesterday
Appreciate the video man! I have 3 trucks to do this 2! Cant wait!
You can also turn the high idle screw all the way in and it will give you another 300 rpm
I read comments, you didn't ruin shit. good video, truck sounds great, i will do the same with my 97 12v. wish my rockers were as rust free as yours. Those engines handle 500hp like it's nothing. around 300 is still very mild , they are so undertuned stock. Over a thousand hp tho stock parts may scatter
She ain't sluggish anymore! Time to find a used he351cw so you can take advantage of the fuel.
Going to do this mod precisely how you did it. Have a 95 12valve. If you could estimate how much power was added, how much do you think it changed it? I’m ok with some smoke or no smoke either way. Just a little increase in power...
Great job on the truck good video keep up the good work 👍👍
Should by gauges to see how hot ur egts r getting, although with a manual trans ur egts won’t get that hot, also boost gauge and fuel press. Love the videos!
Hey just like an FYI that black netting thing on your upper radiator hose is supposed to be where it stops your oil fill cap from rubbing against your upper radiator hose. My buddy took his off and his cap rubbed through hose and he was stranded.
great video better than most on the details of how its done than most others. i bet someone was in that timing cover looks like orange silicone around it.
Wesley Truax yeah, maybe have been KDP tabbed already or just trying to fix leak. But it’s still leaking lol.. and thanks!!
Awesome truck sort of sounds like a semi truck and blows smoke like one either way good job
Love being part of the #loudNproudfam
Loving this cummins build.. Look forward too watching your vids everyday, teaches me a lot on things.. What can I do to my 7.3 powerstroke too get some added horsepower and a little smoke show without spending money any easy mods?
Gavin Ward get a TS 6 position chip from thoroughbred diesel or any other reputable diesel supply company, and make sure you habe adequate exhaust and intake, you'll love it.
#LoudNProudFam #notificationsquad COAALL!!
That truck is always naughty it gives itself coal
Bull, black smoke doesnt = hp/tq . Diesels are lean burning engine . When some one understands what that means they will understand fuel = power in the simplest terms . But it gets complicated making the engine live with more fuel. If you have black smoke at full boost your making power.
hey loud if your truck has a hx35 turbo you can get a boost elbow to adjust the wastegate on the Boost
Love the videos man keep it up
Get a Napa 6637 or a wix 46637 air filter, fits on the stock intake hose and will give a little more horse power, the all Napa filters are made by wix they just don’t use the first number of the wix part numbers
I love this video it helped me lots today thank you.
Beautiful truck man
Yay u did it Malachi pretty cool and looks like she would run better catch you tomorrow buddy👍👍👍👍
Nice videos subscribed
Hell yea nice vid bro
If you do the billet timing cover you need to get an adjustable timing gear otherwise its not worth it.
I'm subed to Dippin' Diesel. Keep up the great vids, and love the truck miss the other white Dodge :(
Do a 0-60 test! my 99 24v runs does it in about 9 seconds. lol i am interested to see what it your truck will do before and after you do these upgrades!!!
2jz Films I've done simular things and mine does it in just under 10 and I'm manual as well
Our 7.3 ran 0-60 9 seconds too
What I did with my 12v was ordered a new fuel pin and Governor spring from I think extreme diesel and turned the fuel up and it rolled like no other man
can you post the links
loving the videos!!!!
Love the videos sense the beginning #LoudNProudFam
*Since
Stop being a loser going around youtube correcting people he wrote sense and meant what he wrote.
Mark Rich 😂😂😂
Will your camera sit on the dash ok? Other youtubers with manuals do it. Great video!
I done 30 clicks on mine and it don't smoke nearly as much as yours wonder why
“Try to get you guys a thumbnail for some clickbait”😂😂😂😂 I️m dead 😂
I did this step by step how you did it and. It blows zero smoke. It used to blow smoke now it don't. I'm lost lol. I've been a diesel mechanic for 5 years but ive never messed with any p-pump mod.
Must not be a very good mechanic
I dig your new dually man
How did you position and AFC housing fully forward or in a factory spot or pull it back a little bit
Why not just do the AFC LIVE from Power Driven Diesel? It's awesome
That's what I want to do to my 94, i already have methanol injection., twin ram intake (banks)stage 3 injectors air raid filter and 4 inch exhaust.wouldnt trade my 12 valve for 10 chevys or fords.,but mine dont smoke ,thanks for the info.
Sorry about the haters dude, don't worry about the they obviously don't have anything better to do
Arp headstuds and while you do that I would do new upgraded valve springs
I love that truck it looks just like mime and its a manual just like my 95 what year is it
Just my opinion- If you're going to do anything billet, I think you should take the engine out, clean/degrease it and rebuild the whole thing to get it ready for high HP mods like you say you're getting so the engine is ready for anything you throw at it.
Whenever add fuel you need to add more air so turn up the boost and it will get more power without the rolling coal I recommend Banks power kits
The internal damage cause but dumping fuel in a diesel engine can cause excessive amount of oil burn pre detonation excessive amount of wear on pistons rings and dangerous amounts of carbon build up on intake and exhaust valves so rolling coal is stupid and can cause you to replace an engine Sooner
Awesome videos man. Can’t wait to tear into my ‘94 12 valve! I’ve got some questions for you about my build, could I email you my info?
Don"t forget when you add all that power your going to smoke the clutch. your 96 5speed came with 210hp stock
G Jones it’ll get upgraded. I already have the 2k set aside for south bend dual disk clutch when it needs done
I would get a kdp & billet tappet cover
Concerning the whole black smoke means no power deal, at the present moment that happens, that is true but ideally, the truck should produce a healthy, thick cloud at the beginning of acceleration then clear up real quick. Means you’re getting the most amount of usable fuel into the engine.
yes two seconds black smoke not more
Awesome. Good job bro
another great video
pretty sure you have to remove the injector pump to do a tappet cover. Just so you know.
u don't but it makes it a hell of a lot easier 👍
Ok sorry I was wrong. Thanks for the info guys. I've never have had to take one off before.
thats the truth!
So, this is an alternative-ish way of modifying or sliding the fuel plate?
Next round of mods possibly BHAF and intake elbow. I would change trans fluid and filter next. Then the exterior !
May not have a filter in trans not sure.
Hell yeah I love that truck bro that's badass
You meant billet manifold plate not tappet cover that's on the side of you block sir sweet vids tho I'm doing just about the same exact build as you so it'll be cool to see what parts you go with keep up the awesome vids man
Gov spring will make a huge diff in drivability.
too much smoke, you have way more potential for power with less smoke too. rolling coal is wasting fuel, which is throwing away power. clean it up abit and youll get more power
Mike Utoober just add more boost haha
Leif Churchill yup. All the smoke is doing is making a show. No power
Mike Utoober I’ll do doing fine tuning as I go.. just changed up the video for the guys interested in seeing how to do it
dont damage your truck by rolling coal though, its not good for a diesel in a lot of cases and it can be costly to fix. i have a Jetta TDI and i liked that it could roll coal....for about a week. after that it was annoying leaving a trail behind me of smoke
you have a really nice truck, dont ruin it with stupid mods like rolling coal
Years late but was your afc foot hard to push after this? Did it just like you it’s just hard to slide it all out back together
Have you looked at any of the Fleece performance parts. If not they are worth looking into.
Sounds great.
Awesome video good job
What size exhaust are you running ? Ans type of turbo ? Sounds wicked with the whistle
I know another trick to get more power with out spending any money if you want me to make a video about it I can show you
Make a vid
fueld by dieslel I don't think it'll work on a 24v becuse it's electronically controlled
honda 400ex it's uploading
honda 400ex it's up
theodore raz I gained what felt like a lot
EPA ....whats that ...oh I found it like that 👍👍👍
If anyone does this and they remove the tanperproof bolts take them to your local hardware store and get replacement bolts that way you don't have to worry about them coming loose or worse stripping off :)
People that like smoke are the same people that don't mind wiping boogers on the couch that other people sit on.
Billet tappet cover definitely
Truck is so great😍
Did you see a good difference in power after this?
You might've already ordered them but if you want it to roll coal and have more power get oversized fuel lines, lift pumps, and 150+hp injectors
Craigo MX on the list
LOUD 'N' PROUD I'm surprised that you actually responded😂I'm a really big fan & I think that it's amazing you even take my opinions into consideration 😂
Now she really fits the 4020 profile
you just need to take off your fan and put an electric fan and you'll have 50 more horses. I had the same set up on my truck and it pulled!
You should get Afc live for you truck sick mod for the 12v
I know it's supposed to be a sleeper/grandpa truck but what's your thoughts on a roll pan for the old girl?
Do the billet stuff it will look good
OH YEA!! Good job...👍👍👍
Just started watching your channel. I have a 96 3500 12 valve with 202,000. Are the airbags worth getting? Looks like I found a new channel to subscribe to!
u get a BHAF for it yet? easy, effective and cheap 👍