This is the best procedure Ive seen yet for BMWs. Ive never liked the idea of downgrading the vehicles firmware, which takes time. So a HUGH thanks for your enlightenment.
2010 Model Ford Focus The menu / adjustment button on the turn signal arm does not work. Other functions are intact. Where do you think I should look for the problem. Thank you.
@@LMAutoRepairs I bought a new signal arm and it didn't work either. I checked the signals. There is, but I get a u1900 communication error on the instrument panel. I will remove the panel and check again. Thanks for your answer. I like and follow you.👍
Luckily that was an easy one. Imagine coming from the night shift, client wants to get the car, and it would have been a nightmare to program. 😂. Nice and easy Luis.
For no reason really... the IM608 on diagnostics seems pretty much the same as the MS908P... I usually grab the MS908P as is more worn etc... that's all... 👍👍👍
I’d love to know what cas version was in that ? Must of been an early one to do it via obd with no additional power supply , do a cas 3++ via obd and your gonna brick the vehicle
Never checked... Did a F13 no issues... I know some of the CAS versions are more tricky... Time will tell as I get some other to do... Thank you for watching and for your comment! 👍👍👍
@@LMAutoRepairs f13 maybe a fem or cas 4 ?? I never do any bmw via obd too many scare story’s on bricking units so they all get done on the bench , I do believe autel im608 has some sort of recovery mode for bricked cas units (I’m not sure as I don’t use autel )
Yes it does... I had a scary one with on a Junction Box module... Autel managed to bring it back to life...😊 I do bench as well if really necessary...😋 👍👍👍
Hi, I am having an issue after programming a new used oem key. I can start the car with the key inserted but the buttons on the fob dont do anything. Any ideas why the buttons dont work?
@@LMAutoRepairs yes, new used unlocked key is 315mhz just like the others, is it possible that the launch scanner didn’t do a good job and the scanner is the one at fault?
Some keys have a resistor inside that you can change its position in order to change the frequency... if is an aftermarket key... I never tried it though, so can guarantee it will work! Otherwise, get the correct key for the veichle... 👍👍👍
Oh, i see. I had a very weird problem, remote works fine, but when i insert the Key i get the wrong key icon, it happened suddenly, i have to investigate with ista firstly, you got any clue? Thanks
Hey. Great content. 👍. I did a 2018 bmw fem and after programming the key starts the car most of the time and the remote never worked. Any thoughts. Did you ever experienced something like that. Could it be the wrong key but I checked frequency and it's the same. Any help would be great 👍 thanks.
Some aftermarket keys can behave strangely... Once programmed successfully, either will work or not... not mid term... I would suspect of the key... 👍👍👍
The coil in the ignition powers the key transponder, enough for the key to transmit the necessary data... Inductive power basically... Just like wireless charging on mobile phones, etc... 👍👍👍
Can I ask where you bought yr 608 from. I've had a look online and the "official" price for it with all the add-ons is £3800 and the same from obdprice with the June discount is £2629. (608, XP400 Pro, key simulator, GBOX2 and the impka kit. The 608 doesn't even look like it's on sale from Autel UK 🤷 Could just do with a heads up from someone that's got one 👍
When I bought my one, I only bought the IM608 and the XP400pro... for warranty purposes etc... The G-box and the adaptors I bought on ebay if I recall correctly... 👍👍👍
This is the best procedure Ive seen yet for BMWs. Ive never liked the idea of downgrading the vehicles firmware, which takes time. So a HUGH thanks for your enlightenment.
☺️
👍👍👍
good morning louis . looks so easy even i could do it . love the out take. you were rough in the last bmw key job
😋
Thanks!
👍👍👍
Your bmws videos are top notch
I like to work on BMWs to be fair...
😊
👍👍👍
You are the best . You make really hopeful videos and inspiring . Keep up the good work learning soo much from you .
😊
Thanks!
Really appreciate your comment!
👍👍
That was some easy and fast key programming.
😊
Obrigado!
👍👍👍
@@LMAutoRepairs De nada, voce ten un bom talento. Eu vi muito dos seus vídeos i digo que é impressionante como voce trabalha.
☺️
great video as always thanks for sharing
😊
👍👍👍
Thanks sir sharing your knowledge
☺️
Thank you for watching!
👍👍👍
This is great job Mr Luis 👏 keep up the good work mate
😊
Thanks!
👍👍👍
Hey tell me pls where do you buy new keys ? 🤝
2010 Model Ford Focus The menu / adjustment button on the turn signal arm does not work. Other functions are intact. Where do you think I should look for the problem. Thank you.
Look at live data... see if you can see where that signal goes, and if is being generated correctly... could still be an internal fault...
👍👍👍
@@LMAutoRepairs I bought a new signal arm and it didn't work either. I checked the signals. There is, but I get a u1900 communication error on the instrument panel. I will remove the panel and check again. Thanks for your answer. I like and follow you.👍
👍
did you only need to use the autel im608 and xp400pro? or did you plug in any other adapters?
Just what was shown on the video...
👍👍👍
Great, very good video about programming, can a Autel Im508 do that same job!?
Possibly... I have never tried the IM508...
👍👍👍
Yes it can.
Luckily that was an easy one. Imagine coming from the night shift, client wants to get the car, and it would have been a nightmare to program. 😂. Nice and easy Luis.
I know...
I don't usually like to start tricky jobs after nights... but I was confident that this wouldn't be too complicated...😋
👍👍👍
THANK YOUUUUUUUUUUUU
☺️
👍👍👍
Heyy Luis, it s Wednesday today in the UK 😁🙋♂️👨🔧
😅
👍👍👍
Good Job, so no insta p? What year?
Not on this car lol
@@PandaBero83 thats how they fly.....
Hi Luis
Why don't you use IM608 as a scanner too?Is the Maxisys better? Thank you
For no reason really... the IM608 on diagnostics seems pretty much the same as the MS908P... I usually grab the MS908P as is more worn etc... that's all...
👍👍👍
Does Autel Im608 works well for the European market(diagnosis)?
Thanks!
I haven't used it too much for diagnostics, but the times I did, it looked identical to the MS908P...
So, short answer is yes...
👍👍👍
Thank you!
Good luck!
I’d love to know what cas version was in that ? Must of been an early one to do it via obd with no additional power supply , do a cas 3++ via obd and your gonna brick the vehicle
Never checked...
Did a F13 no issues...
I know some of the CAS versions are more tricky...
Time will tell as I get some other to do...
Thank you for watching and for your comment!
👍👍👍
@@LMAutoRepairs f13 maybe a fem or cas 4 ??
I never do any bmw via obd too many scare story’s on bricking units so they all get done on the bench , I do believe autel im608 has some sort of recovery mode for bricked cas units (I’m not sure as I don’t use autel )
Yes it does... I had a scary one with on a Junction Box module... Autel managed to bring it back to life...😊
I do bench as well if really necessary...😋
👍👍👍
Hello , with IM608 no need to remove CAS to do on bench ?
No... only on some...
👍👍👍
Where do you get your keys?
Ebay if I recall correctly...
👍👍👍
Amazing job Luiz ! How's the new house ?
Good... Still loads to do, but the major stuff is pretty much done...
Thanks!
👍👍👍
Hi, I am having an issue after programming a new used oem key. I can start the car with the key inserted but the buttons on the fob dont do anything. Any ideas why the buttons dont work?
Hi
Kwy battery?
Have you checked that the key is transmitting?
Also, have you used the correct frequency key fob?
👍👍👍
@@LMAutoRepairs yes, new used unlocked key is 315mhz just like the others, is it possible that the launch scanner didn’t do a good job and the scanner is the one at fault?
@ThatDIYguy211
Possibly...
But on BMM (and many other manufacturers), the remote is programmed at the same time...
Are the other remotes working?
@@LMAutoRepairs I’ve got it to work. thank you for your responses
@ThatDIYguy211
👍
Hi Luis ,purchaced an aftermarket key but the frequancy is 433 instead of my originál 868 ,can that be fixed?
Some keys have a resistor inside that you can change its position in order to change the frequency... if is an aftermarket key...
I never tried it though, so can guarantee it will work!
Otherwise, get the correct key for the veichle...
👍👍👍
Hi Luis, could this be done with ISTA D ?
No... at least as far as I am aware..
👍👍👍
Oh, i see. I had a very weird problem, remote works fine, but when i insert the Key i get the wrong key icon, it happened suddenly, i have to investigate with ista firstly, you got any clue? Thanks
Either the key or the car...
I would test the key... see if is transmitting...
👍👍👍
I forgot to say it is a mini r56 and engine doesn't turn on obviously
Thank you, you're the best!
👍
😊
👍👍👍
Hi need a second key for my BMW where can I contact you?
Which is better , Autel im k100 or xhorse vvdi ?? Please help me chose
I only have the IM608... so I can't really compare...
That said, surely they all have their pros and cons...
👍👍👍
@@LMAutoRepairs does one of them have the ability to program a key even if all keys were lost ??!
The IM608 does have for some cars...
👍👍👍
Hey. Great content. 👍. I did a 2018 bmw fem and after programming the key starts the car most of the time and the remote never worked. Any thoughts. Did you ever experienced something like that. Could it be the wrong key but I checked frequency and it's the same. Any help would be great 👍 thanks.
Some aftermarket keys can behave strangely... Once programmed successfully, either will work or not... not mid term...
I would suspect of the key...
👍👍👍
@@LMAutoRepairs thank you so much for your reply back. 😁
@@Jorge-kn8oj
👍👍👍
Can you tell us were to get this aftermarket keys
I know there is a lot on the internet but i want to know your surce
Usually eBay...😋
I know... I know...🤦♂️
😊
👍👍👍👍
How does the chip work when there's no power in the battery
The coil in the ignition powers the key transponder, enough for the key to transmit the necessary data...
Inductive power basically...
Just like wireless charging on mobile phones, etc...
👍👍👍
@@LMAutoRepairs oh that's genius it's amazing what they can built nowadays
Is it possible to use a key from a other car ? So is it possible to Programm it to my car .
Theoretically no...
Some keys however, can be blanked, and used again...
But other than that, used keys are programmable only once...
👍👍👍
Can I ask where you bought yr 608 from. I've had a look online and the "official" price for it with all the add-ons is £3800 and the same from obdprice with the June discount is £2629. (608, XP400 Pro, key simulator, GBOX2 and the impka kit. The 608 doesn't even look like it's on sale from Autel UK 🤷 Could just do with a heads up from someone that's got one 👍
I bought my one from this guys...
mobileecotuning.com/
👍👍👍
@@LMAutoRepairs thanks for that. They are the £3800 company. Mmm.
When I bought my one, I only bought the IM608 and the XP400pro... for warranty purposes etc...
The G-box and the adaptors I bought on ebay if I recall correctly...
👍👍👍
@@LMAutoRepairs thanks m8
bom dia amigo luis e descansar tambem.
😋
👍👍👍
It's not sunday man
Good morning anyway
😅
Is not?🤔
Lol
👍👍👍