thanks for this, I have an 14m-ba013dx which looks exactly like this that needs a screen replacement. After watching many videos/tutorials, I finally felt comfortable buying a screen to do the repair myself. It should be getting here tomorrow and this video is by far the most short yet informative video I found so thank again!
Excellent , I wish you best for your install. I would almost recommend recording your screen removal similar to how I have done here, so if something doesn't make much sense to you. You can just watch your video in rewind
TIPS: Anyone can do this but if you're over 40 wear reading glasses. DON'T yank out the small connectors on each end of the PCB daughter board. There is a tiny catch to release - flip up the flap on the opposite side of where it plugs into the socket. Need good lighting. Use your phone camera as a magnifying glass to examine close up if you get stuck. Guitar pick/plectrum worked for me to get the screen off. Buying replacement without the digitiser PCB daughterboard is 25% cheaper and maybe easier - you can harvest the old one off as shown in video but no need to disconnect everything. Instead you need to disconnect the two wide ribbon cable connector clips TCN1&2. Do not force. Look at it close up. The jaws of the connector clip will flip open if you lift the long catch running along the opposite side from where the cable enters. No need to force anything.
Hinge Broke free of top cover as "knurls" on top cover side broke free. This popped screen from top cover and glass cracked. How do I determine if glass needs replacement or if whole display (touchscreen & glass) needs to be replaced? Will I also need to replace top cover? Help? 14t-cd100 4DZ14AV HP Pavilion x360
I'm trying to separate the screen itself from the frame, and it seems impossible. Do you know of a way to do this? I've got the screen + frame removed from the laptop right in front of me right now, but there is no clear way to remove the intact screen from the cracked frame.
My screen just cracked out of the nowhere on the right bottom side. The little plastic stick that helps hold together the ankle to open up the screen just somehow slipped outside and crashed the screen now I'm not sure if it just helps to replace the screen, or if I do so it just might happen again. I'd love to try tho! Thanks for the vid!
hello guys...can I use any HP pavilion x360 convertible 14 series lcd or do I need to pick the right model...I got 14-cd1021tu...are 14-cd, 14-dh, 14-dw and 14-ba the same?
For some reason disabling touch in device manager did not work for me - the cursor would still randomly move around due to damage. But all perfect now after screen replacement
Thx for the video! I did all the steps, connected all back together as described. But now no power. Won't turn on. Power connected but no power light. Any ideas?
I would recommend opening the bottom of the laptop and disconnect the battery for a minute or two Then with it still disconnected connect up the AC adapter and see if you can power it up
hola amigo, me esta pasando igual con mi laptop. en el lado de la bisagra se me quebró, por el momento no lo cierro porque presiento que se me rompe mas la pantalla cuando lo hago y tratado de desactivar la pantalla tactil para que no haga contacto con el touche.
@@helberttineo3123 Hola tuve el mismo problema, al parecer un defecto de manufactura hace que la bisagra rompa la pantalla. Han tenido alguna solución de HP directamente ?
Good morning from Greece...I saw the video and thank you for making it public I have a question, I have a hp pavilion x360 convertible 14-dd0000nv, I think it's the same screen?tell me if i have to buy the same from europe or if you have it?Thanks....
Hey, thanks for the video! Just a couple of questions, This model is the 14-ba026TX, I own the 14-ba-127TX, is this video still applicable to my device? I notice upon research that the products are essentially identical, I can't tell the difference. Also, I assume the screen you use is 3rd party. Are these replacements always safe to use for the device? Where would you recommend buying these replacement screens from? I have found them on eBay so far. Cheers!
Hi the steps to replace your model of screen would be the same as this video 3rd party screens in laptops is a bit of a myth, most of the time the panels are from one of 4 manufactures. So even buying a Screen and LCD from ebay would highly likely be the same quality anyway as the original screen
The bottom right corner of my screen popped out and there’s something keeping it from going back in (ironically I think it’s supposed to keep it from popping out 🙄) how can I fix it?
My only problem is I cannot get the bottom middle to snap in. It looks like the glass is unsticking slightly as well. All the other sides clicked in perfectly though.
I'm pretty sure the bottom slides. Where the other edges click in. So put in the bottom section first and then push the sides working your way to the top
Unfortunately while attempting this I stupidly slid the two connectors on the right out without undoing the white part. The screen will not work when my laptop powers on. Have I permanently damaged my device? Can I still go seek repairs?
Bugger, I'm not quite sure which part you are talking about but im guessing the two digitiser flex connectors It should still display tho without them connected Still take it to a computer store, bring your old screen with as well and simply explain what's happened
@@azarus2366 Try this www.ebay.com.au/itm/LCD-Screen-Touch-Digitizer-Assembly-for-HP-Pavilion-X360-14-cd-Series-1920x1080/283340917853?epid=15028930457&hash=item41f86f4c5d:g:v84AAOSwYV5cUR~x
@@mitchellfresh love you! Can you tell me if this one would work for my model? www.ebay.com/itm/LCD-Screen-Display-Touch-Glass-Assembly-For-HP-Pavilion-14-ba012TX-14-ba013TX/223478564502?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 I have this model: hp pavilion x360 14-ba061tx Also where is your donate button? :)
Even mine. First it snapped out. I put some glue and put it back. Worked fine for 2 months. Suddenly broke today. HP needs to do something with these shitty hinges. The rest of the device is beautiful.
I didn't bother as you have to open under keyboard area to do that and was fine. Also enables you to test everything works if you power up before final close.
Sir if you can help me a bit with it as i am only able to find touch screen not the combo of both ....it can be a great help if you can send me a link of the screen as my. Laptop is hp pavilion x360 14cd
I have a question. It may sound confusing. I have two laptops (Hp pavilion x360 ). One is 6th Gen and the other is 7gen I guess, but both are the same size. The screen of the 7th gen got cracked and the touch doesn't work. Is it possible for me to replace its screen with the screen from the 6th gen (Since my main laptop is the 7th gen). Is it possible to swap their screens?
has anyone replaced the glass only? I have an hp envy x360 13'' that I am trying to repair for my nephew, I bought the glass only, as everything works the glass is only cracked?
There are places that could do it but I wouldn't recommend going down that path, as to get s high quality finish it's going to take some decent equipment and time
Personally I have been buying them from a local source (same country as me) purely to save time and possible drama if it is faulty Haven't actually looked at the price difference for buying from Ali actually, most the time it should be good
Answering my own questions found on Ebay for around $140 with free shipping. Also found on AliExpress from a Vendor named LCDOLED Official Store for $127.11 with free shipping. Would this work? www.aliexpress.com/item/32970701034.html?spm=a2g0o.productlist.0.0.bf462acbLMo4cY&algo_pvid=46aa0565-1cec-4d4d-98f6-59e4eb06a72b&algo_expid=46aa0565-1cec-4d4d-98f6-59e4eb06a72b-17&btsid=0be3769015987029743342286ebe6e&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Not in a rush to do this. Just recently replaced battery on my HP Elitepad G2 1000 using a suction device a plastic wedge. Would this also work for this touchscreen?
@@peteyc100 I would skip this model and get a panel with a 1920 * 1080 resolution and get a bonus resolution upgrade will replacing your display Those tools should be ok
I just bought this same laptop for $40 Cracked digitizer LED GOOD.....lol Going to use it for my tv don't need to open with wireless mouse and keyboard. Use it for my pirat um bought movies. ;-)
@@rickstechrepairs just got my part and only took me like 14 mins cause i was being careful, there was adhesive on the panel so i thought a clip was stuck, just needed a lil extra force. everything works fine. i probably wouldnt have done it without watching this video to be honest. touch screens can be....... touchy.
Taking it apart is the easy part, but let me tell you how it went for me. I order the part from amazon, its hard to fit the screen back into the computers frame. Just be careful
Would have been lost without you buddy. Thank you. Was able to pull the screen out with confidence because of your vid🤘🏾👌
Glad I could help
This is the best tutorial for learning to fix my screen! It was so helpful and I ended up enjoying learning about my laptop more! Thank you so much!!!
Cheers. Great to read this has been a big help for you
Just fixed my cracked screen and saved $$$ thanks to your tutorial.
Cheers!
I got 14-cd1021tu...are 14-cd, 14-dh, 14-dw and 14-ba the same?
You've made it seem like an easy fix and I've done other replacements but I can't seem to find one for my 14-DA0011DX.
I got 14-cd1021tu...are 14-cd, 14-dh, 14-dw and 14-ba the same?
thanks for this, I have an 14m-ba013dx which looks exactly like this that needs a screen replacement. After watching many videos/tutorials, I finally felt comfortable buying a screen to do the repair myself. It should be getting here tomorrow and this video is by far the most short yet informative video I found so thank again!
Excellent , I wish you best for your install.
I would almost recommend recording your screen removal similar to how I have done here, so if something doesn't make much sense to you.
You can just watch your video in rewind
Hello, how did the replacement went? did it worked? where did you bought the new one. Thx
TIPS:
Anyone can do this but if you're over 40 wear reading glasses.
DON'T yank out the small connectors on each end of the PCB daughter board. There is a tiny catch to release - flip up the flap on the opposite side of where it plugs into the socket.
Need good lighting.
Use your phone camera as a magnifying glass to examine close up if you get stuck.
Guitar pick/plectrum worked for me to get the screen off.
Buying replacement without the digitiser PCB daughterboard is 25% cheaper and maybe easier - you can harvest the old one off as shown in video but no need to disconnect everything. Instead you need to disconnect the two wide ribbon cable connector clips TCN1&2. Do not force. Look at it close up. The jaws of the connector clip will flip open if you lift the long catch running along the opposite side from where the cable enters.
No need to force anything.
successfully changed! thanks for your video! greetings from austria :)
Glad it helped!
Thank you! Great tutorial! Is this the same procedure for my 2019 HP Pavilion X360 14-cd 14-cd1055cl?
Steps will be very similar
Hinge Broke free of top cover as "knurls" on top cover side broke free. This popped screen from top cover and glass cracked. How do I determine if glass needs replacement or if whole display (touchscreen & glass) needs to be replaced? Will I also need to replace top cover? Help? 14t-cd100 4DZ14AV HP Pavilion x360
the same happened to me I’m still trying to look for places to repair or replace cus it cost $$$
I'm trying to separate the screen itself from the frame, and it seems impossible. Do you know of a way to do this? I've got the screen + frame removed from the laptop right in front of me right now, but there is no clear way to remove the intact screen from the cracked frame.
I have attempted frame removal on displays like this and it never has really ended good (usually cracked glass)
Does the screen replacement keep the pen function the same ?
a mi se me despego la pantalla , como hago para pegarla por un lado
My screen just cracked out of the nowhere on the right bottom side.
The little plastic stick that helps hold together the ankle to open up the screen just somehow slipped outside and crashed the screen
now I'm not sure if it just helps to replace the screen, or if I do so it just might happen again.
I'd love to try tho! Thanks for the vid!
The plastic cover slipping makes me think that a hinge has failed
hello guys...can I use any HP pavilion x360 convertible 14 series lcd or do I need to pick the right model...I got 14-cd1021tu...are 14-cd, 14-dh, 14-dw and 14-ba the same?
Couldn't you also turn off the touch function in "device manager" and avoid these two options you mentioned?? Just a thought.
Yes if it will allow you to do that without the touch going crazy prior
For some reason disabling touch in device manager did not work for me - the cursor would still randomly move around due to damage. But all perfect now after screen replacement
Thanks Mate I just found your channel, and am just starting to learn about device & electronics repair.. So Thanks...
No worries at all
Thx for the video! I did all the steps, connected all back together as described. But now no power. Won't turn on. Power connected but no power light. Any ideas?
I would recommend opening the bottom of the laptop and disconnect the battery for a minute or two
Then with it still disconnected connect up the AC adapter and see if you can power it up
se me quebró justo al lado de la bisagra.. que me recomiendan? aun veo pero trato en lo posible de no cerrarla porque se fractura por completo
hola amigo, me esta pasando igual con mi laptop. en el lado de la bisagra se me quebró, por el momento no lo cierro porque presiento que se me rompe mas la pantalla cuando lo hago y tratado de desactivar la pantalla tactil para que no haga contacto con el touche.
@@helberttineo3123 Hola tuve el mismo problema, al parecer un defecto de manufactura hace que la bisagra rompa la pantalla. Han tenido alguna solución de HP directamente ?
Un técnico la reparo internamente y aflojó la bisagra, ahora puedo abrir y cerrar estando fractura. Solo la aflojó y la pego internamente insisto
does anyone know where i can get the BEZEL only? mine is broken by the hinge and screws came off the bezel itself... my display is working fine!
Same happened in here. when I open the notebook the screen leaves the bezel. Did you were able to fix it?
Can I please get a link for my laptop screen (HP Pavilion x360 14-dh0045tx)
Tell me when you find it
I have a HP pavilion x360 model number 14m-dw0013dx do you have resources to find a replacement screen and does this video work for that model
No sure but I would expect it to be similar
Good morning from Greece...I saw the video and thank you for making it public
I have a question, I have a hp pavilion x360 convertible 14-dd0000nv, I think it's the same screen?tell me if i have to buy the same from europe or if you have it?Thanks....
i would assume they can be purchased in europe with minimal drama
Thanks for the vid - it was a great help. Big thumbs up!
No worries
Where did you order your new screen from,if you don't mind me asking
Haven't you disconnected the battery prior the disassembly? it look a very dangerous way for screen replacement.
Personally never had an issue
Hey, thanks for the video!
Just a couple of questions,
This model is the 14-ba026TX, I own the 14-ba-127TX, is this video still applicable to my device? I notice upon research that the products are essentially identical, I can't tell the difference.
Also, I assume the screen you use is 3rd party. Are these replacements always safe to use for the device? Where would you recommend buying these replacement screens from? I have found them on eBay so far.
Cheers!
Hi
the steps to replace your model of screen would be the same as this video
3rd party screens in laptops is a bit of a myth, most of the time the panels are from one of 4 manufactures.
So even buying a Screen and LCD from ebay would highly likely be the same quality anyway as the original screen
@@rickstechrepairs Thank you so much! keen to give it a shot
@@dylanclements1875 good luck
hey could you please recommend where to order my screen from?
All depends on what country, but Aliexpress is usually ok
Amazon is 133 USD
The bottom right corner of my screen popped out and there’s something keeping it from going back in (ironically I think it’s supposed to keep it from popping out 🙄) how can I fix it?
not to sure on that one sorru
Is the quality of the replacement LCD same as the original one?
same but depends on panel used
My only problem is I cannot get the bottom middle to snap in. It looks like the glass is unsticking slightly as well. All the other sides clicked in perfectly though.
I'm pretty sure the bottom slides.
Where the other edges click in.
So put in the bottom section first and then push the sides working your way to the top
Unfortunately while attempting this I stupidly slid the two connectors on the right out without undoing the white part. The screen will not work when my laptop powers on. Have I permanently damaged my device? Can I still go seek repairs?
Bugger, I'm not quite sure which part you are talking about but im guessing the two digitiser flex connectors
It should still display tho without them connected
Still take it to a computer store, bring your old screen with as well and simply explain what's happened
Ricks Tech Thank you so much for the help, this was a concise and easy to follow guide. Let my comment be a warning for others haha.
Update: I went to the computer store and embarrassed myself. The big connector wasn’t connected properly. Nothing damaged. Thanks again.
@@dylanclements1875 some embarrassment is work it, for the trade off of having your laptop still functioning!!
Any special tools needed? Is it the same with 14C-0053dx ?
Dont think i needed any special tools
where do you buy the screen and how can I make sure it's the right screen?
purchased local to me, search for your exact model of laptop on ebay with lcd digitizer included in the search
can u link me to where i can order this screen
I have the same question too...
partsurfer.hp.com/ShowCart.aspx
@@mitchellfresh theres no way to order here.
How does an individual order a screen here?
@@azarus2366 Try this
www.ebay.com.au/itm/LCD-Screen-Touch-Digitizer-Assembly-for-HP-Pavilion-X360-14-cd-Series-1920x1080/283340917853?epid=15028930457&hash=item41f86f4c5d:g:v84AAOSwYV5cUR~x
@@mitchellfresh love you!
Can you tell me if this one would work for my model?
www.ebay.com/itm/LCD-Screen-Display-Touch-Glass-Assembly-For-HP-Pavilion-14-ba012TX-14-ba013TX/223478564502?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
I have this model:
hp pavilion x360 14-ba061tx
Also where is your donate button? :)
Hi can i apply this screen on 1414-cd0019ne model ?? Cuz i can't find it anywhere
not sure of that model sorry
@@rickstechrepairs
Thanks anyway ❤
How do I replace the right hinge? Apparently, this is what caused my screen to crack.
Even mine. First it snapped out. I put some glue and put it back. Worked fine for 2 months. Suddenly broke today.
HP needs to do something with these shitty hinges. The rest of the device is beautiful.
Do you think its necessary to disconnect the battery? thanx
its recommend to always disconnect the battery
I didn't bother as you have to open under keyboard area to do that and was fine. Also enables you to test everything works if you power up before final close.
From where can we buy the laptop screen?
Ali express
Sir if you can help me a bit with it as i am only able to find touch screen not the combo of both ....it can be a great help if you can send me a link of the screen as my. Laptop is hp pavilion x360 14cd
What type screen could I use for 14-dy0830nd?
not sure
Is this laptop the same as the 14-ba048sa model
not sure sorry
I have a question. It may sound confusing.
I have two laptops (Hp pavilion x360 ). One is 6th Gen and the other is 7gen I guess, but both are the same size. The screen of the 7th gen got cracked and the touch doesn't work. Is it possible for me to replace its screen with the screen from the 6th gen (Since my main laptop is the 7th gen).
Is it possible to swap their screens?
i dont believe they are interchangeable between models due to the different curving of the glass
Right thanks.
Thanks you so very much!
Your welcome
How can I buy the screen and tools
Aliexpress / ebay / local pc part sellers
has anyone replaced the glass only? I have an hp envy x360 13'' that I am trying to repair for my nephew, I bought the glass only, as everything works the glass is only cracked?
There are places that could do it but I wouldn't recommend going down that path, as to get s high quality finish it's going to take some decent equipment and time
how can we just change the glass
without expensive equipment you cant
in your opinion are the lcd screens listed on ali express reliable
(Open to anyone with any knowledge
Personally I have been buying them from a local source (same country as me) purely to save time and possible drama if it is faulty
Haven't actually looked at the price difference for buying from Ali actually, most the time it should be good
Excellent video. Looking for an Aliexpress link to purchase LCD screen for model 4BV71UA #ABA. Am I looking for a 14m-cd0001DX?
Answering my own questions found on Ebay for around $140 with free shipping. Also found on AliExpress from a Vendor named LCDOLED Official Store for $127.11 with free shipping. Would this work?
www.aliexpress.com/item/32970701034.html?spm=a2g0o.productlist.0.0.bf462acbLMo4cY&algo_pvid=46aa0565-1cec-4d4d-98f6-59e4eb06a72b&algo_expid=46aa0565-1cec-4d4d-98f6-59e4eb06a72b-17&btsid=0be3769015987029743342286ebe6e&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Not in a rush to do this. Just recently replaced battery on my HP Elitepad G2 1000 using a suction device a plastic wedge. Would this also work for this touchscreen?
@@peteyc100 I would skip this model and get a panel with a 1920 * 1080 resolution and get a bonus resolution upgrade will replacing your display
Those tools should be ok
@@rickstechrepairs Thank you.
thank you very much.
Your welcome
remember to always disconnect the battery before replacing the screen, to avoid frying the new lcd
any luck in the end
Do you know the the part model number?
no sorry
I just bought this same laptop for $40 Cracked digitizer LED GOOD.....lol Going to use it for my tv don't need to open with wireless mouse and keyboard. Use it for my pirat um bought movies. ;-)
Cheap TV Machine
Where to get this? ...please reply I'm from India....
Screen and right hinge broken., Any info where to get spare sparts.,thanks
can i get only a digitizer for hp pavillion x360 cd0056tx. i have a working lcd and dont want to pay 4 it
Nope, you can only get Glass and Display.. good luck separating the glass from your current display
I hate doing these types of screens especially ones for HP... Replacing the one for my customer went fine, but honestly hate doing HP...
i dont mind them, but i hate it when you need to route the webcam and sensor cables to the top the screen..
@@rickstechrepairs agreed.
i subbed as soon as he said smack bang lol
thanks
@@rickstechrepairs just got my part and only took me like 14 mins cause i was being careful, there was adhesive on the panel so i thought a clip was stuck, just needed a lil extra force. everything works fine. i probably wouldnt have done it without watching this video to be honest. touch screens can be....... touchy.
6:22 yoink what is that
i was removing some of the old tape that was on the digitizer cable
Taking it apart is the easy part, but let me tell you how it went for me. I order the part from amazon, its hard to fit the screen back into the computers frame. Just be careful
I got 14-cd1021tu...are 14-cd, 14-dh, 14-dw and 14-ba the same?
can you put a link to the screen
purchased local to me
Tink you man good help me
your welcome
A very crappy Hp product. The hinges of mine broke.
What happened? when I open my notebook the screen leaves the bezel. was that what happened? were you able to fix it?
Wrong title. You change the entire matrices with a digitizer and a frame. Replacing the digitizer itself is not so easy. Clickbyte :(
The title says LCD + Digitzer, referring to them as one part