Setting Up the Anycubic Photon Zero
Вставка
- Опубліковано 9 лют 2025
- Welcome to Monocure 3D Protips! In this video, we will be unboxing the very affordable Anycubic Photon Zero and launching its first prints. Watch until the very end to see how to properly slice and print a model using the Monocure 3d Tuff Grey.
Printer Settings: monocure3d.com...
Visit our website for more information: monocure3d.com...
------------------------------------------------------
.::TIMESTAMPS::.
00:19 Unboxing
06:40 Levelling the Build Plate
09:20 Resin Settings
12:13 Launching First Print
13:06 Printer Specifications
14:11 First Print Results
17:34 Slicing Settings
18:46 Launching Second Print
------------------------------------------------------
.::PRODUCTS::.
Rapid Tuff Resin: monocure3d.com...
All Products: monocure3d.com...
------------------------------------------------------
::LINKS::.
Request Monocure 3D's Safety Data Sheet: monocure3d.com...
------------------------------------------------------
.::SOCIAL MEDIAS::.
Facebook: / monocure3d
Instagram: www.instagram....
Twitter: mo...
------------------------------------------------------
.::MUSIC::.
Track: Y&V - Lune - NCS Release
Music provided by NoCopyrigthSounds.
Watch: • Y&V - Lune | Electroni...
Free Download / Stream: ncs.io/lune
Music: Perception by Bensound
www.bensound.c....
bit.ly/3BXMvKN
Video Link: • Bensound - Perception ...
Thanks for uploading!
No problem! Thanks for watching
This will be my next printer for sure...looks awesome...Thanks for the vid Charlie
No problem 👍
Thanks for the demo. Just received this printer today. Looking forward to seeing what it can do for me since I'm a complete noob to the 3D printing scene.
Hope you enjoy it!
Z lead screw being not hold on the top is in fact better, because if the leadscrew bend and you put it into two bearings, it will induce Z-wobble.
Interesting - I never thought of that. Thanks for the input.
Just got one guys- thanks for the data
Good luck! Happy Printing!!
Just got one for 60€, thanks for the video!
Great stuff!
Nice one Charlie. Poggers!!! The joke was very funny about covid in the box! 🤣🤣🤣🤣
Glad you enjoyed it
Thanks for the new video!! I like the look of this printer:) I’m a beginner so I might start small. Size doesn’t matter for me
Thanks for watching!
Great way to start out. Make sure u get your post processing procedure set up well. Do lots of research on model placement and supports. Forget what you have learnt about that with FDM as it is quite different. Good luck!
I was checking out your printer settings page and only see the Photon, Photon S, and the Mono X. Are you still planning to put the settings guide up for the Zero?
Good Point! I'll make sure we add it ASAP.
thx
No problems!
Hi, using the photon workshop, how do you slice the model into .pw0
format? Mine only has the option for slicing into .pws format.
Good Question?! Please contact our Tech Support for help with this one. monocure3d.com.au/contact-us/
Never use a metal scraper, you might damage the print platform.
Upgrade the resin vat to the one made out of aluminium so you can disassemble the FEP and clean the vat thoroughly with acetone without damaging it so your installed FEP's wont get damaged due to residue collecting on the vat.
Good tip 👍🏻
Thanks for the walk through :) Do you recommend buying this or the original Photon for a first 3d printer? Anycubic have both for the same price right now and I'm interested in taking the plunge into miniature printing.
Having run a Photon for about 10 months I'd strongly suggest it rather than the Zero. Larger print volume and higher resolution screen for the same price? You also don't have to find somewhere to put the cover while you're doing stuff.
@@MyklCarlton I ended up going with the Photon S and it's been great! :)
@@JimmyBlimps Yeah, it's a better printer overall, that double Z slide makes a difference.
my printer doesnt read the file on usb stick. i just bought and i dont know why it happened
Be careful with the names of your files, try to make them short and simple. Check that the printer model in the software is the same as the actual printer and look at the example files on the usb stick - what is the file extension (the three letters after the fullstop)? Make sure that is what your sliced file is being saved as.
Also, try not to have too many files on the usb stick. Try to give the printer as little to get confused about as possible!
@@MyklCarlton thx Mykl. I'll try wht u r sugesting
@@DanuLee_Wardoyo Let me know how it goes!
@@DanuLee_Wardoyo Is this a new USB stick, that didn't come with the printer? I had trouble with that, so still using the supplied stick.
@@MyklCarlton i hve contact the seller,he said it should be the ori stick that had to be formated.
He said no more than 8gb on my usb stick memory capasity otherwise it failed to read.
Now the problem is solved and my printer works just fine.
Thx Mykl Carlton
AC is needed for this.?
Yes.
Why does everyone want a double-bearing threaded rod? Accuracy and durability should come from the linear bearing and not from the threaded rod, so it's actually better to have these just with a single bearing.
Good point
Got it for 83€ on black friday XD and the washer for 83€ too :)
It's a bundle deal for $99usd on their website right now.
Nvm I misread.. it was an additional option to add the wash station
@@ktmk2610 yes no bundle but combined still 50% cheaper
@@Fabianthehunter I'm just going to dip& swirl then build a uv cabinet
Wow! Great Price, well done.
Buyer beware photon slicing software (proprietary) requires a gpu that
will run open gl 3.3 or higher. a surprising number of windows laptops
WILL NOT. Even many windows 10 units. Their gpu is actually capable of
running 3.3 but intel refuses to release a driver upgrade thus stalling
them @3.1. The same chip (intel hd 3000) has 3.3 drivers officially
released for linux and apple. It's a cool printer, but is it worth
having to buy a new computer?
Thanks for the heads up. Interesting point - I believe Chitubox is now supporting Photon Printers??