VW Golf MK7 (5G) interior lights replaced with LEDs

Поділитися
Вставка
  • Опубліковано 25 сер 2024
  • How to replace interior lights with LED in Volkswagen #GolfMK7. This includes front and rear reading lights and the trunk light. I've used W5W T10 Aglint LEDs for reading lights and #LED C5W festoon 39mm for trunk light, but the correct size is 42mm. Check out how to disassemble interior lights to access and replace standard bulb in your Golf MK7.
    This simple mod changes the look and feel of your car, LEDs are also brighter than standard bulbs, and the color is more consistent with exterior coming/leaving home illumination.
    Amazon: www.amazon.co....
    AliExpress: s.click.aliexpr...
    mr-fix.info/
    Facebook: / mrfixpl
    Instagram: / mrfixpl
    Pinterest: / mrfixpl

КОМЕНТАРІ • 65

  • @whatworkedforme
    @whatworkedforme 9 місяців тому +4

    This video helped me out with my Polo 2019. The dome light and front lighting inc vanity lights were very similar. The trunk light was another thing; taking it out was easy but the bulb is inside a compartment with a metal shroud around it. it is thin metal and once removed carefully you can change the bulb to the LED. Thanks again 👍👍

    • @barankanbureloglu
      @barankanbureloglu 7 місяців тому

      I stuck in the same situation in my 2023 polo, thanks to you I did it

  • @GremmieWhite
    @GremmieWhite 5 днів тому +1

    Incredibly helpful video, thank you!

  • @pauljackson3345
    @pauljackson3345 2 роки тому +2

    Thanks for the video man. Installed mine easy peazy because of this. Smooth operator!

  • @tekguyphoto
    @tekguyphoto 2 роки тому +2

    Exactly what I was looking for. My 2021 Golf has the same lighting system. Thanks.

    • @mrfixpl
      @mrfixpl  2 роки тому

      Happy to help!

  • @ToniML200
    @ToniML200 3 місяці тому

    For the rear lights, pry underneath the *length,* not the width.
    Prying it underneath the width makes the whole process more difficult than it should be and it increases the chances of you *puncturing the headliner* (which I just did).

  • @Alexander.90
    @Alexander.90 4 роки тому +2

    Thanks! Easier than i thought. Doing this tomorrow on my mk7 combi.

  • @JimmieIversen
    @JimmieIversen 4 роки тому +1

    Thanks. Same on Polo luckily :D

  • @IvansBikesBmws
    @IvansBikesBmws 4 роки тому +2

    Good improvement! Dobzhe!
    Subscribed.

  • @thomaskahle9978
    @thomaskahle9978 3 роки тому +1

    It‘s quite okay to replace the original Light Bulbs with LED‘s. In the Golf 7 of my Sister and my Nephew I replaced them with the complete original VW LED-Interiorlights from the Highline-Models. It costs more of course but they are original and look better. You can’t replace the integrated LED in case they are blown, but this is very unusual.

    • @mrfixpl
      @mrfixpl  3 роки тому

      Actually I've replaced mine with the highline OEM ones few months back. Got them 2nd hand for $15 total (front + back).

    • @thomaskahle9978
      @thomaskahle9978 3 роки тому

      That ist very cheap, indeed. I bought them as good as new via eBay and have paid about € 65 for both Incl. the Switch for the Sunroof.

    • @jrnmovies
      @jrnmovies 3 роки тому

      @@thomaskahle9978 When you say incl. switch for the sunroof, was this one illuminated as well?

  • @JSM23x64
    @JSM23x64 4 роки тому +3

    It’s possible to install a light inside the truck (maybe somewhere in the right, under that retractable cover, similar with the position in Hatchback Golf)? With the current one (on the roof) you need to fully retract the cover in order to see something in the back of the truck and that’s a bit annoying. Any Ideas?

    • @mrfixpl
      @mrfixpl  4 роки тому +1

      Funny you ask that. I'm planning to add some light in the trunk as well for the same reason. Sure, you can install additional lights and wire them to the one in the roof. You can also add one under the trunk floor.
      I think once it gets warmer outside I will make such modification and a tutorial for it.

    • @JSM23x64
      @JSM23x64 4 роки тому

      @@mrfixpl Thanx man. I'll wait for your tutorial.

  • @viorelpalade9968
    @viorelpalade9968 3 роки тому

    Good job!

  • @luciovs
    @luciovs 2 роки тому +1

    Hey man , thanks for the video. What would be the procedure to replace the halogens on the plates?

    • @mrfixpl
      @mrfixpl  2 роки тому +1

      Check this: ua-cam.com/video/SUk5pszffMo/v-deo.html

  • @DonMikson
    @DonMikson Рік тому +1

    Orietujesz się czy żarówki we wnętrzu są kontrolowane przez komputer, inaczej czy przy przepaleniu żarówki we wnętrzu lub zastosowaniiu najzwyklejszego leda bez canbus będzie wywalało błąd czy nie ?

  • @udaipurite
    @udaipurite Рік тому

    My dome lights are not turning on automatically when i am removing key or unlocked vehicle and opening door, any suggestions what went wrong or any settings got messed up? It is working fine when i click button manually after sitting inside. Mine is vento 2011 highline.

  • @daibennett9224
    @daibennett9224 4 роки тому

    I removed the complete rear one,just couldn’t find the clips to remove the casing

  • @rischidaranpushparajan4209
    @rischidaranpushparajan4209 3 роки тому +1

    Which bulbs are they you are using ?
    Please let me know

    • @mrfixpl
      @mrfixpl  3 роки тому

      I’ve been using Aglint LEDs but now I switched to OEM LED interior lights. There was a factory option for that in Mk7 (and other VAGs).

  • @shakeelrahman2049
    @shakeelrahman2049 3 роки тому

    Hi, I installed a HID conversion kit in my golf mk7 reflector halogen headlamp. But there’s no power but I have made connection. Any idea why ?

  • @davidfraga1672
    @davidfraga1672 4 роки тому +1

    Thanks for the video. What type of lamp is used to replace the glovebox light? C5W as the trunk light? Thanks

  • @jakubscigalski1867
    @jakubscigalski1867 Рік тому +1

    Cześć. Podrzucisz jakieś sprawdzone rurkowe Ledy do wnętrza golfa mk7 lift? Dzięki i pozdro

    • @mrfixpl
      @mrfixpl  Рік тому

      Najlepsze co możesz zrobić, to wymienić lampki na fabryczne w wersji LED.

  • @ancmelo
    @ancmelo 4 роки тому +1

    Good One!! Mine came with led interior lights, except the boot, and the glove box. I've changed the boot light to led, but it will stay always on (very weak), unless the car is locked. Do you had the same issue??

    • @mrfixpl
      @mrfixpl  4 роки тому +1

      Try using LEDs with resistors (so called can-bus ready)

    • @ancmelo
      @ancmelo 4 роки тому +1

      @@mrfixpl thanks for the tip!! By the way, it's not possible to solve the problem using OBDEleven?

    • @mrfixpl
      @mrfixpl  4 роки тому +1

      I might be wrong but I don't think so.

    • @ancmelo
      @ancmelo 4 роки тому

      @@mrfixpl thanks for your time and tips!!

  • @claudiu1178
    @claudiu1178 3 роки тому +1

    HHi, do you know how to code trunk light to have light only in the trunk en not in all the auto when i open it please?

    • @mrfixpl
      @mrfixpl  3 роки тому

      As far as I know there's no code for it.

    • @claudiu1178
      @claudiu1178 3 роки тому

      @@mrfixpl i saw it few weeks ago on youtube but i had no time to save it and now i cant find it anymore and bcuz you know so much i tought you know also. Anyway, thank you and have a nice weekend too. 🤝🏻

  • @twinzo6505
    @twinzo6505 3 роки тому +1

    Hey i used these for golf 7 tsi 2015 for number plates lights and it gives me an error does anyone have the same problem?

    • @mrfixpl
      @mrfixpl  3 роки тому

      Exterior lights are monitored and if you swap traditional bulbs with LED you will need to change coding of the BCM to let the module know that it should diagnose this circuit expecting LEDs over there.
      You can go with so-called CAN-BUS LEDs but they will produce extra heat and can cause strobe effect when diagnosing the circuit.

  • @mradnaan96
    @mradnaan96 2 роки тому

    Hey guys ive replace my front reading lights to LEDs with ease however with my rear reading lights i cant seem to get the original blue bulbs out. Anyone got any solutions?

  • @rafaelsoprano8999
    @rafaelsoprano8999 4 роки тому

    Do yoz have any link of the 42mm c10w bulb?

  • @impeRAtoR28161621
    @impeRAtoR28161621 3 роки тому +1

    What I dont like about this LED is that turn on and off immediately without nice transition original had. I know it is different technology but probably there are some LEDs that can work this way. If anyone knows send the links 🙂

    • @mrfixpl
      @mrfixpl  3 роки тому

      Yeah, LEDs have instant reaction and if one want the fade-in / fade-out effect it needs to be programmed on the cars side. Will investigate it some more.

    • @impeRAtoR28161621
      @impeRAtoR28161621 3 роки тому

      @@mrfixpl yes, that would be nice and classy. Because some led, especially leds with lot blue tint in it like from ebay look really cheap and instead od nice, modern, classy interior you get cheap tuning looking car

  • @pinctinc
    @pinctinc 4 роки тому +1

    they are canbus right?are they hot?

    • @mrfixpl
      @mrfixpl  4 роки тому +1

      Not hotter than standard bulbs.

    • @pinctinc
      @pinctinc 4 роки тому

      @@mrfixpl is fitting hotter maybe?

  • @feg-ue9zg
    @feg-ue9zg 3 роки тому

    Hi, I'm planning to do this next days. How are these after a year, still work?

    • @mrfixpl
      @mrfixpl  3 роки тому

      Working. But considering getting used OEM LED lights instead of LED bulb replacements.

  • @Ichigo6543
    @Ichigo6543 4 роки тому

    Hej, czy Golf 7 wymaga "żarówki" LED C5W z CANBUS? // Hey, does Golf 7 require a C5W LED bulb with CANBUS?

    • @mrfixpl
      @mrfixpl  4 роки тому

      Oświetlenie w podsufitce w MK7 nie wymaga specjalnych LEDów.
      Headliner illumination in MK7 does not require any kind of special LEDs.

  • @ThatRedGTI99
    @ThatRedGTI99 3 роки тому

    Hi, i've installed led lights but when i turn them off they remain on but dimmed, is this possibly because they are not canbus? Thanks!

    • @joebloggs4191
      @joebloggs4191 3 роки тому

      Yes correct! you need canbus or add some resistors.

    • @adamberec83
      @adamberec83 Рік тому

      My one was Cambus led light, and after door closing remains dimmed position, so not turned off completely.. I was try many leds without luck.. So i went back to halogen

  • @rwilliam17
    @rwilliam17 3 роки тому +1

    Changed all interior lights as per video. Great instruction! When I want to adjust the lights in the Car-menu the LED's are not responding (continue max. brightness). Do you have a solution for this? Thank you!

    • @mrfixpl
      @mrfixpl  3 роки тому

      As far as I know interior lights (ones in the roof liner) are not adjustable.

    • @rwilliam17
      @rwilliam17 3 роки тому

      @@mrfixpl With the halogen (blue) lamps this was possible. Synced with the dashboard lights and adjustable through the CAR-menu - interior lights. Now only dashboard is dimming. The LED's changed (handglove, roof liner, trunk etc.) are Aglint led and stay 100%. Should these be coded to LED as all exterior lights?

    • @mrfixpl
      @mrfixpl  3 роки тому +1

      @@rwilliam17 To be honest I have never seen something like that in Golf MK7. Sure - dashboard, footwell, door ambient lights - can be adjusted from the Car > Interior Lights menu. But trunk/roof/glovebox? It is operated from BCM but never seen any reaction from these lights to user settings.
      Do you have some more details? Is your car modded? Are you first owner? Is there a separate slider in the Car menu for these lights? Can you make a video of it working?

    • @rwilliam17
      @rwilliam17 3 роки тому

      @@mrfixpl I already changed mine to LEDs, but tomorrow I will record it for another MK7. Keep you posted.

    • @rwilliam17
      @rwilliam17 3 роки тому

      @@mrfixpl I want to run a dashcam cable from front via the roof using the interior lightning mounts to rear . I have not seen this yet. Do you think this is possible? Will the cable rest on the inside (cable visible when looking up from the inside)? And do you as an expert know how to open the HBA camera (not DLA or LA or ACC). I can't find a tutorial... Can you please help.. Thanks!