i always do the corners in a way that looks like the pattern continues onto the other wall for example, if a complete tile is 20cm long, and my cut is 10cm long, i continue the next wall with another 10cm cut; if it's 7cm long, i continue with a 13cm long one, etc., etc. that way it doesn't look like two separate patterns but to accomplish that i never start tiling from the corner, cause in that case i wouldn't have anything to continue the pattern on complete pieces
The subway tiles usually have a lip or rim built into them that provides the correct spacing. You don't want huge grout lines-minimal with subway tiles is best
@@Tyscratshould’ve still used spacers at the 90 to keep each tile bumped tight. You can see the grout joints is inconsistent across the wall, especially at the corner
@@QLHTilingWaterproofing you can't prime paint, it will achieve nothing. Paint must be removed before tiling to ensure a good bond between tile and wall. Never have I heard of paint primer.
The worst tiles are subway tiles. Millions of grout lines!! Rule #1 for a bathroom less grout lines the BETTER!! Cleaner look as well as 10 years down the line you won’t have so many dirty grout lines fools!!! Stop buying cheap subway tiles.
It LOOKS alright, although your pattern is what we call "broken" which is incorrect layout. You dont set 1 wall and then just choose a different layout from prevous wall smh AND, i know its "just subway tile" but youre not backbuttering the tile it seems.......which is a complete FAIL for warentee of the tile and makes your install not just WRONG, but unacceptable. If Homeowner were to see this video, they could require you to return and redo from start 2 finish, with YOU paying for ALL materials and tile. Before you go posting UA-cam videos looking for a pat on the back for a 45 min subway tile job, make sure youre doing SOMETHING correct. Although your corners and lines look good, youve completely FAILED in your install, making this a SHITSHOW by definition to industry standards
Belíssimo trabalho para alguém de muita inteligência e competência.
Thanks Marisa for you nice comments 🙏
i always do the corners in a way that looks like the pattern continues onto the other wall
for example, if a complete tile is 20cm long, and my cut is 10cm long, i continue the next wall with another 10cm cut; if it's 7cm long, i continue with a 13cm long one, etc., etc.
that way it doesn't look like two separate patterns
but to accomplish that i never start tiling from the corner, cause in that case i wouldn't have anything to continue the pattern on complete pieces
100% AGRE..
Excellent attention to detail mate. I wish you success
If the person is paying for it then yeah.. don’t give time away for free
@@AussieWhitePride course they do, you obviously include that in the price
@@snooty9349 so you do it for a cheap job as well…. Massive loss of money
Hi, what make and model green laser level are you using? Thanks
Hi @waterstruck1
I uses
www.cltoolcentre.com.au/dewalt-dw089cg-xj-3-line-self-levelling-green-bean-cross-line-laser-kit.html
DEWALT dw088cg
Got same one it’s good to go
Hi, what type of diamond cutter do you use to cut the tiles? Great Job! God bless you. Regards, Tony
Hi Tony
Thank you for your nice words mate.
We use tile cuter from Stigma brand its got a diamond.
QLH
Yo! I respect the grind. Much love to you!!
Very nice job
Thanks habibi 🙏
Do you not need spacers for subway tile? 😮
Hi Juventus
You don’t have to use spacer.
You can if you want.
Thanks
QLH Tiling
@@QLHTilingWaterproofing if you want the grout to stay in more than a month you do
@@QLHTilingWaterproofing some subway tiles come pre spaced. 1/16-1/8” spacer recommended if not 👍
The subway tiles usually have a lip or rim built into them that provides the correct spacing. You don't want huge grout lines-minimal with subway tiles is best
Skills to pay the bills 👏
Should have stacked ur corners different so it appears to wrap around corner looks alot better
Let the man be
Not in this case. That wouldve caused there to be a narrow sliver of tile at the very end that’s unappealing. He approached it correctly.
Nice 😀😀😀👍
Fantastic design friend
Thanks Krishna 🙏
Where are your tile spacers sir
No spacer for this tiles
Usually they have a 1/16 lip built into the tiles for a 1/8 grout line. If you want a bigger grout line then that you add spacers.
What do you do for a living? is it tile? then shut the fuck up
Why no spacers?
beveled tiles they have spacing built in, mister expert.
@@Tyscrat Just asking a question mister expert
@@psychobread1252 no, you’re tying to point out a flaw. Desk jockie
@@Tyscrat I never tried to point out anything, fail.
@@Tyscratshould’ve still used spacers at the 90 to keep each tile bumped tight. You can see the grout joints is inconsistent across the wall, especially at the corner
Nice job
Thanks 🙏 alot
Can tile adhesive stick to paint now?
Hi kooper good question.
No glue will not stick to the paint always use paint primer or scrub the paint first.
Kind regards
QLH
@@QLHTilingWaterproofing you can't prime paint, it will achieve nothing. Paint must be removed before tiling to ensure a good bond between tile and wall. Never have I heard of paint primer.
Well you might never heard of it but there is especial paint primer but ideally best to remove the paint prior tiling which we do most of the time
@@QLHTilingWaterproofing What is the name of the paint primer?
Зор чкибди
Good job
is it a 5mm notched trowel?
Nice work!
How come no spacer on every tile ?
Some tiles have beveled edge so not needed
What type of laser level do you have? And do you like it?
Dewalt laser yes i like it
si pules un poquito las esquinas del corte entonces perfecto
So tile doesn't need spacers for sufficient grouting?
Spacers haven’t been around that long. They are nice though
Super
Nice amigo
Please let me copy and save & share your post Thanks a lot for your help
Thanks for watching our videos Go a head do it mate 👍
No grout joints ??
Perfect
Thanks mate
No need for tile spacers?
Well done 👍
I would have started on the left and continue my pattern going right that way my alternate stacking image is continous from the left wall to right
So you don't need spacers or special wallpaper or glue to stick to the wall?
I tile with silicon , ten times quicker and ten times cleaner and ten times stronger
Hi Terry
You can stick tiles with silicon on certain places not on bathrooms or shower floor tho.
QLH
Not 10x stronger
@QLHTilingWaterproofing but would it work on the wall like the guy is doing in the video
🤔 no lo sé.... se ve bien pero no estoy seguro que vaya aguantar mucho tiempo ya que tiene muy poca mezcla 🤔🤔🤔
Diamond bit for those corners would make it much more flush but good job.👍🏽
Thank you 🙏
Exactly. It will be 1 little extra step, but it will look and feel so much better.
@@aubertbethencourt3241 yes agree mate but silicon will go on top of it will be fine you wont see the edge anyways
Never flush in internal corners as silicone expansion joint needed
@@robtatum5277- What will be expanding?
Goog 잡~~
하나부터 열까지 완벽에 가까운...ㅋ
Side tiles should be equal
They are equal
Excellent work
Thanks 🙏
No spacer?
“Splashback tile” 😂
Where is the grout going to go?
Top inside corner poor finish
I'm playing this game as we speak😅
Внутренний угол никакой
Какой ещё внутренний угол? Ты че курил😂😂
No spacers????
❤😮
the seam is in the right corner, you will see it very clearly
Well done mate❤
Splascback liting by using waysub lites 😅😅solo es un sarcasmo buen jale compa
That moment you realize you forgot spacers 😖
Very good point Chiq but i didn’t forget customer wanted the minimum gap😁
🙏
А где швы то?
don’t forget the spacers
god job boo
Лажанул раскладкой.нужно было наоборот складывать для эффекта кирпичной кладки
Beautiful
Thanks mate
Donde puedo comprar ese lacer
You can get online from dewalt
Faltou picota a parede vai cair tudo
These tiles dont need spacer..😮
What happen to buttering the actual back of tile? I forgot this is for entertainment only😂😂😂
Good jobs friend
No spacers, no joint, no room for movement....tiles fall off....simple
Y la junta?
good day
All these comments about everyone's diffrent opinions on how corners should look...where your dividers at bro?
Ok
…Spacers? Grout? 😂
🤣🤣🤣🤣🤣
That shit finna fall off with a good shake n boom 😂😂 guy didn’t install correctly
Es ta Mal la linea del cemento VA pa UN LADO no pa bajo
lizar ymarad asahbi
Rookie not taking measurements from the plumb line
Centralize
Niceee
Thanks 🤗
Calling it a splash back is unsettling me lol
The worst tiles are subway tiles. Millions of grout lines!! Rule #1 for a bathroom less grout lines the BETTER!! Cleaner look as well as 10 years down the line you won’t have so many dirty grout lines fools!!! Stop buying cheap subway tiles.
Hi Stavros I agree subway tiles are not the best choice for bathroom.
It all comes down to personal preference dude there is no one size fits all when it comes to tile work
@@daleon96 sure thing,keep following the leader
@@Nafpaktos-Florida
Personal preference is following the leader now? Lmao. Show me on the doll where the subway tile hurt you.
Subway tiles are the best .more grout lines the better , clean your bathroom and they won't be dirty fool
Угол кривой
😂😂😂😂😂😂
It LOOKS alright, although your pattern is what we call "broken" which is incorrect layout. You dont set 1 wall and then just choose a different layout from prevous wall smh AND, i know its "just subway tile" but youre not backbuttering the tile it seems.......which is a complete FAIL for warentee of the tile and makes your install not just WRONG, but unacceptable. If Homeowner were to see this video, they could require you to return and redo from start 2 finish, with YOU paying for ALL materials and tile. Before you go posting UA-cam videos looking for a pat on the back for a 45 min subway tile job, make sure youre doing SOMETHING correct. Although your corners and lines look good, youve completely FAILED in your install, making this a SHITSHOW by definition to industry standards
раскладка....
Без расшивки швов, вид плохой. Все ошибки сразу видно.
Butt joint????
Чепуха,отпадет! До да начал делать подрезку во воемя ввысызания
Чет херовенько
back buttering isnt a option you rookie
Что это за убогий угол фу позор
well, it passes but nothing id put on youtube to get likes for...those cuts are kinda shitty
Через год упадут
Tambien se podria caer, si hubiera algun movimiento telurico.
Esos azulejos te van a durar 2 años se van a caer. Estan mal pegados y sin dilatscion
Ужас какой
Super
No spacers ?