Getting closer to that Holiday ride. You gave your familiar bike a new personality . Going to be so much fun getting to know her. A fourth of July to remember! It doesn't get much better than this.
Hey Mike, I saw your evo rebuild series vids and really got a lot of good info, the cam chest part helped me out with my cam swap so I just want to say thanks man.
I’ve got a FatBoy 1997 that just broke down. Overheated and died. No compression in either cylinder. About to take the tops off and see what’s in there. I been binchwatching these vids and feeling like I’m Jim. Have a mechanic by my side when starting something I’ve never done before Brilliant! Cheers from Norway.
When I had bought my 98 Softail last year I discovered that the fuel enricher was broken off at the threaded end. Had to remove the cable and plastic weld it together. Works fine now. Thanks for pointing out about not over tightening the cable fasteners. Great video;she,s coming along nicely ;am sure your friend must be getting anxious to try it out.
Hello Mike and good to see you and Jim I can’t wait to hear it I am ordering me 42mm Mikuni carb that fits my 06 night train I get it at cost we’re I work that saves me about 150.00 dollars I can’t wait
A couple times I've tightened the outer nut on the enrichener cable and made the button too hard to pull out. It's a fine line between that and too loose and it'll walk back in at cold idle.
Found a broken bolt on the rear of the bracket. Only reason I found it was that bolt was securing the ground for the horn. Now have to figure out how to get the rest of the bolt out
Don't be shy. Experience goes a long ways in extracting a broken bolt. Practice on things that don't matter. Unless, you have priors and are good at this.
The new style Mikuni idle enrichment cable (p/n: F990-662-002) has a steel threaded section of housing where it fastens to the motor mount slot. But the cable does NOT come with the Mikuni starter plunger, spring or nut. All sold separately. You cannot use the old Harley spring and plunger in the Mikuni carb. It will not seat. Also, the cable attaches to the Mikuni carb on the right side, facing the carb, whereas on the Harley CV carb the cable makes a straight shot across the motor and attaches on the carb left side. So the Mikuni cable has to make a stretched "S" shape, and it doesn't like to do that.
Right on ; 👍👌✊🏻 I noticed and was telling a friend that the early - early Indian scouts had “no” top motor mount. Looks good like sitting in cradle . 🤔 Have a good day !!!-
Harleys need top motor mounts. I don't remember Indians with no top motor mounts, but if so, they probably bolted the engine case higher up in the frame, higher than just the bottom. They also bolted the trans to the back of the engine case.
@@pacificmike9501 yup 👍 got a love for the old Indians and more towards the old scout . The ret hd mechanic has a chief engine to rebuild . I wanna watch 😁. He showed me that the cams are one lobe for intake and exhaust. Amazing engineering. Interesting- ✊🏻👍👌
'Sou'easterlies paint the clouds tonight, as sunset spreads it's inks, of purples, pinks, & those between, as the Greenwood senses drink, stale pressure holds the dews at bay, the dampness dulls the view, the storms should break by dawn they say, to restart the cycle, new. For the rains of England fall upon, those of these soggy isles, & the Flintstone furniture doesn't help, as it tends to give us . . . . Greetings, O'sun baked ones, stay cool out there : )
Mike I changed voes and removed top motor mount to get to the voes on my FLSTN 93 I reinstalled the mount with new voes and tightened the 3 bolts really hard upon taking the road I’m noticing a buzz vibration on floorboards at certain rpm if I speed more highway speeds it goes away it’s only a buzz on floorboards at certain high rpm on mid low gears, is it the voes that is causing this or the motor mount was installed too tight ? The bike was on kickstand when took off and put on the motor mount not straight don’t know if that make any difference
My bike had a faulty voes so it was disconnected the new voes is new and original harley and the spark timing is correct dot on the center at 1200rpm with voes connected
You'll have to go through a catalogue to find what you want. I do remember it being a six inch over stock length cable to allow for the higher handlebars. And, I believe it is a Barnett.
Getting closer to that Holiday ride. You gave your familiar bike a new personality . Going to be so much fun getting to know her. A fourth of July to remember! It doesn't get much better than this.
Thank You. Enjoy the holiday.
I never broke a motor mount, but I like your story about your three piece mount. :-)
Ah yes, my misspent youth.
Hello Mike,
PROGRESS is being Made :-)
Thank YOU & Jim for taking US along the Journey
COOP
...............................................
Our pleasure! Almost done!
Thank you! All you guy's
Thank You
😊
Hello from Sweden🇸🇪. Very good to see that you are almost ready to start it up again👍👍👍. Can't wait to hear the sound. Kjell" the swede" Blomstrand. 😎
Very soon!
Loving this evo build! Makes me want to stroke my 98 heritage. Great work Mike n Mike!
Thank You
😊
Hey Mike, I saw your evo rebuild series vids and really got a lot of good info, the cam chest part helped me out with my cam swap so I just want to say thanks man.
Glad I could help
Really cool Mike to see this all come together. Looking forward to the fire up!!
Me too. Thank You
Coming right along great job
Thank You
Looking good and it won’t be too much longer until we get to hear that bad boy fire up!
Thank you. It will be nice.
As always a 👍👍 job gentleman ! 🇨🇦
Thanks 👍
I’ve got a FatBoy 1997 that just broke down. Overheated and died. No compression in either cylinder.
About to take the tops off and see what’s in there.
I been binchwatching these vids and feeling like I’m Jim. Have a mechanic by my side when starting something
I’ve never done before
Brilliant!
Cheers from Norway.
Thank You. Sounds like you've got something serious there.
It's 4th of July weekend and I think I can almost hear that engine fire up already! LOL
Perfect time to start up that American Iron!
I hear you.
Im glad I found your channel as Im really enjoying watching you work and its good to watch someone who knows what they are doing. 👍😁
Thank You.
Almost Done!
Yes!
When I had bought my 98 Softail last year I discovered that the fuel enricher was broken off at the threaded end. Had to remove the cable and plastic weld it together. Works fine now. Thanks for pointing out about not over tightening the cable fasteners. Great video;she,s coming along nicely ;am sure your friend must be getting anxious to try it out.
Thank You and yes he is.
Great work, getting close to putting her back on the road! Maybe a fourth of July ride!?
Maybe.
Thank you for sharing. Enjoyed.
Glad you enjoyed it
Hello Mike and good to see you and Jim I can’t wait to hear it I am ordering me 42mm Mikuni carb that fits my 06 night train I get it at cost we’re I work that saves me about 150.00 dollars I can’t wait
Sounds great!
I'll bet it took three times longer to edit and upload these videos of the top end rebuild, than it took to do the fitting of all the parts !
There's some truth to that.
😊
A couple times I've tightened the outer nut on the enrichener cable and made the button too hard to pull out. It's a fine line between that and too loose and it'll walk back in at cold idle.
Lube it. Route it carefully. They are a bit of a pain.
Mike ,what type plug are you running ?
Standard Evo plugs.
Found a broken bolt on the rear of the bracket. Only reason I found it was that bolt was securing the ground for the horn. Now have to figure out how to get the rest of the bolt out
Don't be shy. Experience goes a long ways in extracting a broken bolt. Practice on things that don't matter. Unless, you have priors and are good at this.
The new style Mikuni idle enrichment cable (p/n: F990-662-002) has a steel threaded section of housing where it fastens to the motor mount slot. But the cable does NOT come with the Mikuni starter plunger, spring or nut. All sold separately. You cannot use the old Harley spring and plunger in the Mikuni carb. It will not seat. Also, the cable attaches to the Mikuni carb on the right side, facing the carb, whereas on the Harley CV carb the cable makes a straight shot across the motor and attaches on the carb left side. So the Mikuni cable has to make a stretched "S" shape, and it doesn't like to do that.
It is made so your original cable can be used with the enclosed adapter.
Right on ; 👍👌✊🏻 I noticed and was telling a friend that the early - early Indian scouts had “no” top motor mount. Looks good like sitting in cradle . 🤔
Have a good day !!!-
Harleys need top motor mounts. I don't remember Indians with no top motor mounts, but if so, they probably bolted the engine case higher up in the frame, higher than just the bottom. They also bolted the trans to the back of the engine case.
@@pacificmike9501 yup 👍 got a love for the old Indians and more towards the old scout . The ret hd mechanic has a chief engine to rebuild . I wanna watch 😁. He showed me that the cams are one lobe for intake and exhaust. Amazing engineering. Interesting-
✊🏻👍👌
Yes, I've worked on a few Indians. I sold my last one several years back. It was a 52 80 inch Chief.
@@pacificmike9501 have a great 4 th July mike - 🇺🇸
Happy 4th to you.
'Sou'easterlies paint the clouds tonight, as sunset spreads it's inks,
of purples, pinks, & those between, as the Greenwood senses drink,
stale pressure holds the dews at bay, the dampness dulls the view,
the storms should break by dawn they say, to restart the cycle, new.
For the rains of England fall upon, those of these soggy isles,
& the Flintstone furniture doesn't help, as it tends to give us . . . . Greetings, O'sun baked ones, stay cool out there : )
You know it's either too hot or too cold. It's just weather. But your take on it is just priceless.
😊
I like Pleasant....... 😁🍻great video....🍻
Thank You
From Russia with love!
And, love to you.
Mike I changed voes and removed top motor mount to get to the voes on my FLSTN 93 I reinstalled the mount with new voes and tightened the 3 bolts really hard upon taking the road I’m noticing a buzz vibration on floorboards at certain rpm if I speed more highway speeds it goes away it’s only a buzz on floorboards at certain high rpm on mid low gears, is it the voes that is causing this or the motor mount was installed too tight ? The bike was on kickstand when took off and put on the motor mount not straight don’t know if that make any difference
My bike had a faulty voes so it was disconnected the new voes is new and original harley and the spark timing is correct dot on the center at 1200rpm with voes connected
The main thing is that the mount is not stressed, that it fits tightly and flat. Again, no stress.
Be sure the engine and trans bolts to the frame are tight.
👍🖖
Thank You
Do you have part# for throttle cable.and name..
You'll have to go through a catalogue to find what you want. I do remember it being a six inch over stock length cable to allow for the higher handlebars. And, I believe it is a Barnett.