Bind and Fly Yuxiang F06 EC135 RC Helicopter with F09S Seahawk Radio Controller
Вставка
- Опубліковано 24 лип 2024
- Join us as we walk you through the hassle-free binding process for your Yuxiang F06 EC135 RC helicopter and F09S Seahawk Radio Controller. Get ready to unleash the full potential of your RC helicopter adventure with this simple guide and enjoy flying your yuxiang F06 EC135 RC helicopter with a better radio controller.
Read and Have a Smile: bit.ly/4bH6xca
#rc #helicopter #ec135 #howto #yuxiang
F06 Helicopter: bit.ly/f06eurocopter
Order Radio Here: bit.ly/3lYgAUD
EdgeTx Heli Models: bit.ly/edgetx16shelis
Best RC Helicopters
Airwolf: bit.ly/fwairwolfv3
FW450 V3: bit.ly/3YT8qeF
Huey UH1: bit.ly/3ugxzT2
Bell 206: bit.ly/3HCnVl4
FW200: bit.ly/3OYCFgi
SeaHawk: bit.ly/yxbhrsc
BlackHawk: bit.ly/yxblackhawk
RadioMaster TX16s: bit.ly/3FBQMnt
RC MD500 helicopter: bit.ly/48l8jhs
Visit Our Site: createc.store
Buy Me a Coffee: bit.ly/alicoffee
Join Channel: bit.ly/joinalishanmaoyt
Helicopters Spare Parts:
Huey UH-1: bit.ly/3SpmfPB
FW450L: bit.ly/3m4GOVm
F09S Seahawk: bit.ly/3lYgAUD
Bell 206: bit.ly/3INPDw0
FW200: bit.ly/3xPcAZn - Авто та транспорт
Hi, I started watching you since 15 years back. Keep it going
You rock! please follow my new channel www.youtube.com/@parababahobbygarage new videos will appear there
Alhamdulillah. Seeing your new studio. Hope, one day this studio will be nicer like Chinese one 🙂
insha Allah I hope better than that. Thank you brother
Now just get the upgrade receiver board and bind it to the TX16S, for a fully collective pitch helicopter. Would also be a good opportunity for you to revisit your previous video on how to do the setup on the TX16S but this time using EDGETX.
well hope so
Im loving my C189 MD500 Coast Guard Scheme and i just ordered the Millitary Paint Scheme one 💯 💪🏿
Agreed. Its far superior to this YX F06 IMO. The YX F06 is beautiful but very low impact performance and not at all agile. Too bad. I wished there was a way to increase the bank angle and pitch.
fly in manual mode :) with high rates.
@@alishanmao I do and its still (as you know well) slow and less agile than the C189.
Thanks i will be ordering one with this radio
Good choice! use our links please
Thanks for sharing this information with pilots who may want to upgrade to a better transmitter for the Yellow F06 heli, but doesn't work with the Red E135 heli. However, for the E135, I wonder if the stock controller that ships with the UH60 Blackhawk heli might work with the Red E135? If you happen to own the UH60, try binding it with the Red E135 and let us know what you find. The transmitter for the UH60 is a different style from that of a F09, bit if it works, it eould be a nice upgrade transmitter for the E135. Thanks.
it seems Eachine version of this helicopter will not bind to Yuxiang version radio. that is some messed up thinking right there to tune the proprietery frequencies for the OEM brand Eachine, because eachine just buy from other suppliers, with some changes and slaps their stickers. but making a frequency that does not match with the F09S radio original from yuxiang man that is really mess up. i have mentioned to Yuxiang many times that if they kept it like before on SFHSS, they will sell truck loads more of their helicopters for futaba owners, and radiomaster radios owners who would love to buy PNP. but hey they don't wanna listen.
Waalaikumsalam..alhamdulillah nice rc heli buddy😊
Thanks buddy 👍😀
Good flight.. Check this video ..Bind and Fly Yuxiang F06 EC135 RC Helicopter with F09S Seahawk Radio Controller
Thanks buddy 👍😀
Good video Ali
Glad you enjoyed
Ali, thank you very much 😊 would you compare md 500 and ec 135 which one is a nice rc helicopter 😅
they are two different animals. If you are on a budget, MD500 is not bad. if you can afford to spend more, EC135, but I would suggest go with F09H: bit.ly/yxbhrsc
Nice, and it would be better with MULTI protocol using Radiomaster with HALL gimbles
yes of course but they do not consider that feature
Captain, what’s the deal with the red light on the bottom? I like it and want it. If possible can you tell us where you got it, where it draws its power from and installation. Share a link for it if possible. Thank you. 👍🏼🚁 Joe
red light on the bottom of helicopter tail boom, its the stock light comes on all helis
Hey...can y tell me which camera fits better on this model???
Thank you!!
i would not fit any camera on this. these are to fly and enjoy line of sight. you want camera, get a drone
Does this overwrite the sea king or does it add it as another model? Are these 2 helis the same size?
over ride. you have to bind again which is super easy in fact
Great videos !!! I have a question ,,, i have the eachine 135 which i think is the same ,,, i was wondering if i couod bind it to my xk x 6 radio ??? And if yes how ??? Thanks Tom
eachine and yuxiang are same. eachine just takes yuxiang and slaps their sticker on it.
@@alishanmaoyes i figured ,,, but my question is can it be bound to a xk x6 transmitter ???
no it won't they changed the protocol completely@@tommycruz100
Ali, great insight on these heli's i have both. Plan on rebinding. If i wanted to sell it or give to someone later how do you bind back to original controller? Appreciate you!
the user manual shows the bind process for original radio :) hope you did not lose it
@@alishanmao Who needs a manual when we have you?😉
Thank you but still manuals are helpful hahaha@@yawwho
About Eachine 135
Just found this in Banggood Q/A about this Yuxiang controller :
"Can I bind the F09S radio with the Eachine EC*****CH helicopter?
Yes this transmitter can bind with ec 135 f06 red version, blue version and modster version. Don't remember for switch on gps to middle position for binding process and center out rotorhead."
Please could someone test and report (I do'nt own any of these yet) ?
these yuxiang helis will bind to this radio. eachine does not make these helis. they just get them from yuxiang and slap their name on it.
Salam alikhoum ali good video
wassalam Thanks
Ali, have tried several times to bind to helicopter but will not bind. Any ideas. Thanks
It should if it's standard version. Which radio are you trying to bind
I can't find the tx in the video. Instead, I found a similar one from Hot RC. I don't know if it can connect. Hope you can help verify. Thanks a lot
these radio are made by HotRC ;) for Yuxiang
Very useful information, I will order the tx hot rc I found to connect to this helicopter. Thanks a lot❤
Good afternoon from Greece 🇬🇷.
Question: when is on optical flow the switch is on auto and when i want to fly manual the switch is on optical flow and manual.
Is that correct????
auto and manual does not care where the other switch should be, it just disengage the optical and gps
Thank you for your help!!!
Perhaps you can make a short video How to fly it with that transmitter,‼️‼️‼️
May get this radio ,,, is it programable ?? Throttle curve ?? Pitch ?
no
I've done this radio to the F06. It works great. It is a much better radio.
Yes sir. It sure feels better than the gaming controller that are paddling 😜
この、!プロポセットヘリを!購入したのですが?ノーマル,プロポ,の?ヘリコプターに?バインドが❗なぜ❗出来ないのですか?同じ機種ヘリコプターなのに?受信機が❗違うのですか?なので?1機の?ヘリコプターしか!とばせないので?おしえてください。
follow the steps i show in this video
I've tried this several times and it won't bind to helicopter. Can't understand why.
Is it possible to change to mode 1 (right hand throttle) on this Transmitter ?
yes, there is a button near top left of screen says mode
@@alishanmao Ok , Thanks. Your advice is a great help.
Can you you use the f09 after binding the fo6
yes just re bind
Once I have bond together with control. Will have to trim it?
just do gyro calibration quick before each flight
@alishanmao ok thank you
@alishanmao the GPS switch push it to ward's picture of the helicopter or the other way?
Can it be bound to a XK X 6 Transmitter ??
no
Hi - thanks. You did not say anything about the high and low rates, and whether the heli does invert with new F09 TX or not. Answer is no, but folks should know.
HL button next to screen will work normal. auto invert, i do not recommend anyway but checking with yuxiang how it would work on this radio. Thanks, hope it helps
That's a bit disappointing. Seems then that the receiver in the heli is definitely locked at the factory so no radio can allow you to fly the heli in full aerobatic mode. A real shame.
yuxiang ec135. eachine e135. has whether it has the same features
both are same helis. yuxiang is factory, eachine just puts their sticker and resell
Not same!!! Eachine not compatible with F09
Neither is the Amewi DRF EC135. It will not bind
Hi,
Just found this in Banggood Q/A about this Yuxiang controller :
"Can I bind the F09S radio with the Eachine EC*****CH helicopter?
Yes this transmitter can bind with ec 135 f06 red version, blue version and modster version. Don't remember for switch on gps to middle position for binding process and center out rotorhead."
Please could someone help ?
Which switch controls optical Flow?
What should my tail gain and throttle be set on my FW-450L 2.5
Flight mode
75 throttle, 64 tail and reduce if wags
Align scale body trex 450 h1 controller and a better helicopter without that noisy tail .
Probably cheaper too.
possibly
Shouldn't this radio bind with the eachine e135 same helicopter isn't it? Help it won't bind!
Mine flashes yellow quickly then turns red 🤔
Maybe install an F06 control board
its about the control boards compatibility. only if they could leave it SFHSS we could use Radiomasters multi protocol radios and they could have sold tons more PNPs
So do you think I should change it to an F06 control board?
I've returned the F09 to frustrating
WHAT IS THE REST OF THE COMANADS ON THAT RADIO
check my how to fly video
I did bind the radio, just I was concerned about the rest of the
Futures like trims, adjustments,
Part's replacements on a crash event. I'll be watching your channel for Manny years. I learn lots of things.. Thanks for being there for everyone that watch
Your channel.. I land my Heli and when I was in the ground ready to shutdown the model the Heli
Bank Right and damaged the blades and swash plate..I open
The Heli I discovered the receiver
Antenna was hanging down close to the Motor Rotor I believe it could have a signal distortion..
I watch the video that you posted
With the Heli apart and I secured
The antenna on the proper location..
Hi friend you don't live in China any more what country do you live in now?
UAE
WARNING!!! This transmitter WILL NOT BIND to Easchine E 135 version don't waste 70+ $$
thanks for update
No problem! if you find the correct protocol please advise as the transmitter is garbage
One other question goosky s1 or OMP Evo?
Why???
Different protocol??
They aren't the same??
@@EKplanes_400 nope
🤩 "promo sm"
:D Thank you
Warning, the DRF red and white EC135 sold by Amewi will NOT bind.
thanks