King Pin Installation

Поділитися
Вставка
  • Опубліковано 26 січ 2025

КОМЕНТАРІ • 20

  • @petejakeshotrodparts3242
    @petejakeshotrodparts3242  6 років тому +3

    We should have mentioned, that the spindles used in the video already have bushings installed. On the table we wanted to show that the king pin kit comes complete with bushings to replace in stock spindles. Thank you for catching this.

  • @disporsche5326
    @disporsche5326 3 роки тому +3

    What about packing grease in the bearing?

  • @richd5749
    @richd5749 2 роки тому +1

    Good i got extra pins for my 37 Dodge, just in case. When they were offered in early 1990's via USPS.

  • @johnhutsenpillerjr1785
    @johnhutsenpillerjr1785 5 років тому +1

    AMERICAN made.
    I LOVE THAT !!!
    ALL THE BEST SIR.

  • @jonathanlind
    @jonathanlind 4 роки тому +1

    Really helpful. Thanks guys!

  • @juantorrecilla4621
    @juantorrecilla4621 3 роки тому +1

    what about the lock in pin dosent fit and its far to tight

  • @Watchinchemtrailz
    @Watchinchemtrailz 4 роки тому +1

    Bought a kit like this and nothing fit. Had to send out the spindles and have the bushing reamed to fit the king pin, and the lock pin would pull clean through the hole.

    • @mirvin1129
      @mirvin1129 4 роки тому +1

      Watchinchemtrailz from Jason Slover: “This is common, as a king pin bushing is undersized and always needs to be reamed. The spindles in the video have already been reamed. We pre-fit our spindles when someone buys a front end or spindle kit from us. When replacing stock spindles with new kingpins, the bronze bushing are pressed in and then reamed to fit the spindles. The lock pins are a standard size to fit the stock Ford hole. With pin in place they should stick out of the axle just slightly.” Thanks

  • @hoanglongphamngoc6374
    @hoanglongphamngoc6374 6 років тому +2

    video bạn rất có ý nghĩa tôi xem để mà học hỏi mong bạn làm nhiều video nữa hay hơn thank

  • @davevan8864
    @davevan8864 Рік тому

    Thanks!!

  • @philippehousset8290
    @philippehousset8290 4 роки тому +2

    You forgot the grease

  • @kenneybert7597
    @kenneybert7597 6 років тому +3

    you left the bushings out ,, they are laying on the table

  • @mechantics
    @mechantics 2 роки тому

    Hand washing not required😂

  • @rohitpal7545
    @rohitpal7545 Рік тому

    Ramkumar holkar good

  • @jenydey7602
    @jenydey7602 4 роки тому

    Good.

  • @RohitPal-yq8tq
    @RohitPal-yq8tq 3 роки тому

    Ram Kumar good

  • @vikas.s.b9166
    @vikas.s.b9166 4 роки тому

    Osm

  • @CosgroveNotts
    @CosgroveNotts 7 років тому

    Repairs for dummies lol