KAWASAKI ZX4R 1989 Full Restoration | Restored KAWASAKI ZXR400 4Cylinder
Вставка
- Опубліковано 13 лип 2023
- Dear Mr/Ms
Thank you very much for your value time to Watch,Like,Comment,Share and Subscribe our videos on The Restoration Channel, and we will try all our best to find more idea as try to Create more videos to make your assist and more facilities.
If you have any idea or more convenience to support us please don't hesitate to contact with us ! i apologize for the mistake if I made this recovery!!! - Наука та технологія
I am addicted to watching restoration videos. I have watched thousands of them. I thought I had seen everything. Well, this video corrected my beliefs. I cannot even describe the magnificence of the work. May God bless you, young man.
Forfait
Cuchillas
Jijiji
Hkgdjklkcjllusdvn
Muchedumbre
Gigantón
Fjb!habla
Dhgjgkgkjlklhgvkoxglbggjhff
Vncmhlkññ!bvghkhxfg hi5perfil
Hgjlcafkllcgmmmm
No❤❤❤❤❤
Note, UA-cam algorithm is by time trapping us in a zone, narrower and narrower and sucking all the time, Notice that
Balance is good.
I have 4 accounts myself, first as my main one with mostly usrfull and things I am intersited in, mostly beneficial,
second one for my studies in software engineering and tech stuff
third one for religions related stuff and also a side islamic studies as well
a last one for anything aside, or anything that is irrelivant or even useless or even comedy stuff
this give you more focus and help you from,
each account is like a separate environment, each have its own things,
and you don't watch anything outside the account's relevent stuff,
if so, first switch the account, so you have focus, as well as not screwing up your recommendations page
May god help you and that you have a great message in life
I love restoration too by the way
@@user-md9hl7ee9w Bu
.
eu também
Dude, this is one of the best videos I've ever watched in my whole life ! This guy is either a wizard, a magician or maybe an alien of the motorbikes! Call NASA! He deserves to be hired ASAP! 😍
YEAH WOW !!!
Bái phục
@@jackmigge1624😢😢😢😢😂😂😂🎉😂😅
poop egg
Send him to Mars
I am a craftsman from Morocco. I have watched many videos about Americans and Europeans, but frankly, Asians and the Asian race are very wonderful people with literature and craftsmanship. Frankly, I have benefited a lot, and I see myself as a mechanic and I understand very well the skills that you used, which were completely renewed, which I had not seen and which constituted an obstacle for me, but I found the solution in you, for example, the way you cleaned. I used the nails. Recycling gasoline is a very wonderful idea. We respect it and I respect you as well. Greetings
Tự hào lắm. Người Việt Nam mình quá tài năng !
Bạn là bậc thầy của nhiều chuyên ngành rồi! ❤
Rất tuyệt vời !👍👍👍
Sao video của VN mà kênh nước ngoài lại phát hả bạn?
@@namhaile1108 kênh này của người Việt, nên để tiếng Anh cho dễ nhiều người nước ngoài xem
Wow. Those plywood box is completely brand new, must be packed just before I loading, this mud and powder paint mixer coating on the bike is awesome. He knows how to make bike looks rusted , all his bike has similar condition. Nice
😊😊❤❤😊❤😊❤😊❤😊❤❤
Even the tyres look new with full treads on this "rusted" bike.
@@riviol87you got it😅
@@riviol87you got it😅
Bunch of idiots who can do nothing but talk bad about people on the internet
This guy is not only a good mechanic, but he also well qualifies as a good sculpture, artist also a lateral thinker as well. Not only he looks at the small tiny details of countless screws, nuts cables but he plans and designed the shape of the outer skin of the bike. His coordination to plan of the possible material to work on the molding for that fiberglass part, just makes me shaking my head..He walked down the road and pick up that mud. We have to go to an art supply down town to buy those art material..If by chance I need to resurrect my Kawasaki, he is my guy..
The bike runs like shit. Not a good mechanic
This guy is Vietnamese
@@ctytnhhthuongmaivadichvuqu4075 I think he is.
Being an engineer myself, I am impressed by the quality of your work, I realy am. Regards.
No 29:10
As if reassembling all the bits together is not enough, you make your own fibreglass body from scratch is simply awesome. You're a genius through and through in my eyes.
This is the most delicate job of restoring an old motorbike, tearing it apart and fixing it back again is really amazing..❤❤
Dismantling is too easy for me. When assembling it, there would be around 30 screws left and I wouldn't even know where they came from. Beautiful work, incredible. Congratulations.
hahaha, brother you are right 100%, it happen!
record disassembly
Ko biết lí do gì m bắt gặp video này nhưng thích đến mức đủ kiên nhẫn xem trọn từng giây! Thật tuyệt vời với đôi tay người thợ Việt!
Hay quá bạn thợ giỏi mà
Eu que pensei que ja tinha visto de tudo numa restauração, mais essa foi incrível, superou toda minha expectativa, P A R A B É N S , que Deus o abençoe sempre 🙏🙏🙏
You are Muslim❤❤
@@aboodalqam2235 sou brasileiro
@@aboodalqam2235 Sou brasileiro
That patience you gave restoring the radiator fins is priceless!
Out of respect I watched it twice, second time at double speed. Insane perseverance.
I watched the whole video, it was too good to miss it. What an amazing job!!! The bike looks awesome!!!
This man said: I only need new paint, filters, and fluid. I can fix everything myself 😂 this is amazing
gila nya dia hafal lohh semua baut dan part part yang dia lepas dan disusun lagi dengan sangat sangat sempurna, dia bongkar motor dan merakit kembali layaknya pabrikan, gilaaakk mekanik jenius🎉
This is a super restoration, usually there will more than 100 operators to assemble this bike, but he have done on his own. Also he improvised, the sand blasting process, the way they created the mouldings was mind blowing. Hats off to their skills. Watching this video is very satisfying for a bike enthusiast, Keep it up.
👍👍👍👍
So much skill its a third world country
Those equipments and the tools he used look like from a legit bike body shop. But a good project end result anyway.
An almost total reconstruction of a motorcycle from a clay sculpture of the fairing! This is the work of an ARTIST! Admiration and RESPECT !
😂
Can’t like this enough. The use of clay was mind blowing
What function for that clay??
@GamingZone-dc4uw so he could make a mould. Once he had shaped the mould in the wire mesh he then used fibre glass to create the fairings. Clever man
I couldnt find any words to write, i couldnt find any words to say. But Just this. Bravo, super. Respect 💯💯💯💯💯🔥🔥🔥🔥
Masterful work. Seriously good. Saved the bike from the scrap yard. Few would have bothered to. Next level good. 👍
The first ever restoration video which i watched without skipping a single second. Loved the way ,like he has not left a single thing on the floor everyhing is fitted so well ❤
Lie 😂
Same here and I don't even like motorcycles @@Karthik241191
Really I don t know how you re so able to do this, incredibile work! I haven t a words to describe this but its magnificent! Much much congratulazioni for your capability , great!
3d printing left the chat, handmade fairing are perfect😅. Very skilled ❤.. loved that😊
Muito bom ❤
I really watched it from the start till the end. It's so satisfying to watch your motorcycle restoration video! 👍
Congratulations. Parabéns vocês são muito inteligentes um abraço do Brasil 🇧🇷 pra vocês
Calling him a genius is joking! I don't have words for my appreciation! Just WOW!!!! The company should award him for a GOLD CUP!!!!!
The level of patience this guy has while he restored the radiator is too impressive
Cap
@@nonoasailo9690o
@@nonoasailo9690⁰😅0
Yea dude seriously
@nonoasailo9690
According to the road signs, this guy is from Vietnam. There are not enough words to describe how good this guy is. It is beyond my imagination, but this guy is the master of the masters. Wow!
Não entendo de mecânica, porém é inegável a inteligência, a técnica os recursos técnicos para cada solução. Parabéns para este profissional que além de tudo tem muito capricho.
Unos verdaderos artistas, genios totales , felicitaciones. Abrazo grande desde Montevideo Uruguay
Sufficient equipment & tools + comprehensive knowledge + experience are good combination factors to make the job done easily 😊
Bacot lu
It looks easily done but its such a complex task in reality! Thubs up to the creators!
Your amazing
👍👍👍
Power tools on the motor tell us, they have no idea just like you.
Que buen trabajo. unos artistas y tremendos mecánicos. felicitaciones. saludos desde Colombia.
¹¹ E ouviu-se uma voz dos céus, que dizia: Tu és o meu Filho amado em quem me comprazo.
¹² E logo o Espírito o impeliu para o deserto.
¹³ E ali esteve no deserto quarenta dias, tentado por Satanás. E vivia entre as feras, e os anjos o serviam.
¹⁴ E, depois que João foi entregue à prisão, veio Jesus para a Galiléia, pregando o evangelho do reino de Deus,
¹⁵ E dizendo: O tempo está cumprido, e o reino de Deus está próximo. Arrependei-vos, e crede no evangelho.
¹⁶ E, andando junto do mar da Galiléia, viu Simão, e André, seu irmão, que lançavam a rede ao mar, pois eram pescadores.
¹⁷ E Jesus lhes disse: Vinde após mim, e eu farei que sejais pescadores de homens.
¹⁸ E, deixando logo as suas redes, o seguiram.
¹⁹ E, passando dali um pouco mais adiante, viu Tiago, filho de Zebedeu, e João, seu irmão, que estavam no barco consertando as redes,
²⁰ E logo os chamou. E eles, deixando o seu pai Zebedeu no barco com os jornaleiros, foram após ele.
Marcos 1:11-20
It's admirable, with an old car that you can restore and use, he is an engineer in manufacturing. The car has a really great engine, listen to its roar.
It can be said that you are the Picasso of the new era. I watched the entire video carefully. You did a wonderful job. I respect you very much. Good luck.
Great job! But the screws and bolts all came out quickly and easily, and the threads were all brand new even when so rusted outside. That was lucky. We could even see the red color of the thread lock in some of them. Also, fantastic that the chassis, subframe, and the other super rusted parts he soaked into the barrel at 16:44 had no rust holes whatsoever. This is a miracle.
spray on rust!
Reminds me of them faked primitive building videos.
It's not a miracle, these are just faked restoration videos lol
🤣🤣🤣🤣 & the ignition coils were brand new also!!
dude my battery fluid is leaking on my bike and didn't noticed it after few weeks when i want to clean my bike the rust effect is similar to this even on aluminum parts, and it's relatively easy to clean, perfect for mass produced restoration videos
I could not stop watching this video... I was in amazed at the craftsmanship, and the attention to detail. Well done!
³¹ Então, chegando-se a ela, tomou-a pela mão, e levantou-a; e imediatamente a febre a deixou, e servia-os.
³² E, tendo chegado a tarde, quando já se estava pondo o sol, trouxeram-lhe todos os que se achavam enfermos, e os endemoninhados.
³³ E toda a cidade se ajuntou à porta.
³⁴ E curou muitos que se achavam enfermos de diversas enfermidades, e expulsou muitos demônios, porém não deixava falar os demônios, porque o conheciam.
³⁵ E, levantando-se de manhã, muito cedo, fazendo ainda escuro, saiu, e foi para um lugar deserto, e ali orava.
³⁶ E seguiram-no Simão e os que com ele estavam.
³⁷ E, achando-o, lhe disseram: Todos te buscam.
³⁸ E ele lhes disse: Vamos às aldeias vizinhas, para que eu ali também pregue; porque para isso vim.
³⁹ E pregava nas sinagogas deles, por toda a Galiléia, e expulsava os demônios.
⁴⁰ E aproximou-se dele um leproso que, rogando-lhe, e pondo-se de joelhos diante dele, lhe dizia: Se queres, bem podes limpar-me.
Marcos 1:31-40
Impresionante. Dios y Jesús te ayuden siempre. Saludos desde Buenos Aires 🇦🇷.
Sigue asi
Your country is beautiful.. 🤘🏼✌🏼
yepp, Vietnamese people are also beautiful and kind too.
He did the work of the whole factory. Genius ❤
Yeah….the work of a 2nd rate factory…….
it is not restored. he build same motorcycle
Regardless the fact that it was staged, the videography and the authenticity is top notch. Well done! .
Staged........
Made my day. I love it. Thank u for being so smart & for the hard work to the finish line... may God bless u as always.
Thật tuyệt vời. Nguoi vn đầu tiên mà e biết giỏi đến mứa độ như vậy. Full đồ nghề. Sáng tạo cực tốt. ❤
no words, a lot of talent , patience and intelligence. THANKS
Di mana YA INI😢
yeah and the brakes had no rust on them because the restauration was real and legit. promise
😊
Show adorei o trabalho de restauração 👏👏👏👏🙋🙋🙋
Es un genio y talento en su trabajo. Éxito
أنا لم اشاهد أفضل من هذا الشخص العظيم عمل رائع جداً ❤❤❤
That is awesome. I watched from start to finish. I must say I admire your dedication to craftsmanship.
Amazing skill that this guy possess should warrants Kawasaki to grant him an Engineering Title for this fantastic work done.......! He did not need anybody to guide him nor to consult anybody for the final perfection of this master piece of engineering work...... Well done my friend....you are just GREAT.....!
He used a power tool on engine parts. He would he fired day one just like you.
@@CryaboutmyhandleI did cringe every time that happened, but he did have some interesting techniques on other things
U r great 👍
Nice dedicated job lads, and I don't want to sound critical but the motor at the time this was filmed was running a bit rough, those carbs need jetting and balancing properly boys .. but otherwise, fantastic.. 👍
Probably cos they didn't number anything 😂
I have an old YZF400RR(r). Mine i found was the track kitted version. The stock 16,500 rpm redline on these 400s is amazing. Mine with all the factory mods will rev to 19,000rpm. And weighs like 300lbs. these are so fun on tight twisty, no one not even an h2R can hold a line like these on good rubber..(until the straight opens up then h2 is a dot on horizon speeding away lol. Good work, wish I could take mine out , but its cold and icy.
The equipment in the end is not super cheap either, painting tools, electric supply blocks .. Fantastic job! I remember I restored 1989 MB SL 400. I literally can feel pain and long days included in whole process.
I am confused whether to give full marks to the restoration-crew or to the people who filmed and presented the whole episode. But as a whole it is such a splendid team work. Hatsoff to all of you.
Fr bro, the camera man was awesome and the filming is top notch
Polis motor Philippines 🇵🇭 🏍🚨🖲
@@Notthatprogamer-cg8ln34:23 🎉
25:54 extra ordinary work by both camara and mechanik work
This guy was great. Very accurate and precise. Not a spare left on the ground. Hope he has his own shop.I
love to see things like that. Has done it like a breath of fresh air.
Thanks for the reply. Again I would say you are great. Are you in Japan or California.
@@preacherboss5435 i think he is asian
@@ryosupercell4137 Thanks! He is very good. Got to be Asian
Двоякие чувства. С одной стороны восхищение от умелого кропотливого труда, с другой экономия на проводке и изготовление колхозного пластика. Это вообще убило. Любая пайка не заменит цельного провода. Отказ систем мотоцикла от вибраций , времени произойдет в любой момент и хорошо если не за тысячу км от дома. По моему, наплевательское отношение к безопасности.
Total respeito ao senhor mecânico completo, parabéns pela excelência do trabalho pois nafa acontece da noite para o dia , issobe fruto de muito trabalho e dedicação.
Bro got a whole factory at home! Incredible and impressive work. Every thing aside, I was impressed by the engine-related skills. He apparently replaced some crucial inner parts. Still, given the condition, I doubt the engine will last very long. Last, when I saw the cement, I was like what is happening hahah that was another level. Amazing job!
We had a Vietnamese jeweler working in our jewelry store a few years ago, he was a terrible jeweler. His ring sizing were far below par, he couldn’t set stones, and oftentimes he broke stones (we were desperate). One day when work was slow he handmade a pair of glasses frames out of 14k gold……without any sort of pattern, they were so incredible it blew me away. Why he couldn’t use that skill on jewelry was beyond me.
👍@@Notfiveo0
Pois é o cara fez uma fibra de carbono 😂😂
I assure you that engine will last a long time!
It's an amazing video that there is 2 men who are super talented which is hard to swallo. Amazing... 🙏
I can't believe you missed the chance to build a naked bike. But very nice restoration after all, thank you
Son unos genios , que paciencia admirable el trabajo tan detallado adelante , este mundo necesita genios como ustedes bendiciones...
Great job mester, I am amazed, your dedication to work, your sincerity, your passion, your patience, your effort and your intelligence are all unbelievable. You are an artist.
So this person is a painter, a chemist.❤❤
천재적이다 .. 당신의 노력에 찬사를 보냅니다. 시스템을 완전히 이해하고 있는 당신의 바이크 지식에도 찬사를...
What skill, what dexterity, you truly are a genius!
😊
Es admirable todo su conocimiento señor usted se merece todos los respetos...quisiera saber cuánto tiempo le llevo toda la restauración gracias saludos
Una hora
@@user-sn6dk1xj9q jjaajjaa
اليابانيون حين نهضو لم يعطو امريكا وحدها درس في التقدم
ومعنى الحضارة والرقي
بل للعالم اجمع
وأثبتو أنهم رقم واحد في العلم والإبداع وكل ما يخطر على بال انسان أو لم يخطر ... إنهم حقًا قدوة للبشرية
.وقوة عضمى .
Damn I watched this like an instagram reel, didn't even notice it was an hour long, reel entertainment for men here
Great work. How do you keep up with all the parts and where they go back? Impressive! You clearly know what you're doing tho. 👍👏
It's like anything else ,you do it enough times you can almost do it blind folded. I'm sure those guys have years and years experience in bike building
Your work is amazing bro,the first ever restoration video ive ever watched without skipping,im reallly inspired.
Same here man, they did amazing job🙌🏿
Saludos desde Venezuela 🇻🇪 eres un profesional te felicito. Gracias por traer a la vida esta belleza de moto. Lo estoy viendo en este momento 😃
The finest type of modification for motorcycles 🤟
Absolute dedication to the cause. This is wonderful . Thank you very much for recording and documenting this 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Idotsjogdlhdoudohskhsnohsmohsn jogusnkhslhsnlgsm kndlhsbohsnigdbjxblhsnusbigblgdnjgsbhgbskhgxjxhbhxbkvkhbhxbkxhxnhxjxhhkzjxzxnxkgdnkhx khskhs ibohsbusboysbohsnigdnuxvkudblbxknx
Iudjkidjiidmidklidjisjijsjjdjlidjjjdjjjdjmkojaaaskdmkjsmljsmjsjlisjjsjdjjsjjjisjoisjjjjsjjhdhudjkdnjdjkisjksnkjsjjkjskosmkjjkusjousmlimkijsisk j
٧زععععععغتتززززززززززز@@JhonatanSuarez-gj9sj
Been immersed in water so long even the tires are rusting! Incredible!
😅😅
😊😊😊😊😊😊
Cai bot mau trang ngam nuoc la bot j vay a
🤔
@@precious_orimylll
Magnifique la restauration ! Good job moi j'ai une 900 ninja et je vois qu'il y a beaucoup de pièces en commun car c'est un cadre de 750 stinger 1998 💪👍
How many hours of work for this one hour of masterpiece🙌
Big respect, I dream for this life !
Absolutely astounding !.. To resurrect that bike from the near-dead was truly amazing, but to go on to make it a custom fairing and tailpiece from scratch was utterly incredible to see !.. I don't know how long it took you in real time, but you definitely deserve an award !..
wow this is the only restoration channel worth watching. Amazing work and techniques without skipping any process!
превосходно! ай да парень, ай да молодец!👍👏 аплодирую стоя
Ingenuity, resourcefulness, knowledge, and patience, all in great abundance here.
Absolutely incredible to watch
ua-cam.com/video/M4mLgezokEE/v-deo.htmlsi=lhYKBfEgGqqectfX
at least 12 hours of work in 1 hour shown. Damn I would give my bike to such a man without even blinking. ❤❤❤
Do you really think he wud finished by 12 hours or just a sarcasm?? Mann that will take alot of days to finish 😮
Enjoyed watching this, giving a bike a new life, from biker to biker fair play
bu emek profosyonel hayran kaldım bravo süpersiniz turkiyeden selamlar.
So much talent guys, I enjoyed every step of the restoration process….final result is amazing!
Yydhzhzhs🛑🛑🛑🛑🛑🛑🛑🛑
Я всегда смотрю и удевляюсь какие руки золотые у этого человека и терпения много. 👍🙂
Интересно только одно откуда они этот хлам берут , или специально солью с перекисью обрабатывают.
Серьёзно? а мне кажется что он просто делает всё максимально дёшево , чтобы подороже продать, вместо того чтобы нормально восстановить мотоцикл!?
3u p
Icw
@@user-fg9vh2xx3f так и есть...пистаполы они
yo también traduje para ver lo que dicen :v
That's why MEN are called the LEGENDs Big Respect To you my Bro Big W super talented
Wow amazing job good to see you brought new life to the Kawasaki, first I thought it’s not possible😅👍😁
I have spent most of my life restoring antique motorcycles and building customs. It occurs to me to wonder who crared this bike up in that beautiful, crate and painted the Kawasaki logo on the side of the crate? I would also wonder how the Bike got in the condition that it’s in without any of the bolts and fasteners being seized. It appears as though the rust and damage to the bike happened very quickly? Very curious.
Yes its very suspicious, came with a bike stand as well.
Submerged in the sea possibility. It was just boxed up for shipping I thinks. Or possibly house fire and it was doused in water and extinguisher powder.
Now that I watch more, it’s definitely fire damage, extinguisher powder and corrosion from after the fact it sat without cover.
If you have spent your life restoring bikes then I’m sure you would agree that this is a quick, sub standard clean up designed purely to make money by gaining views from viewers with no idea about bike restoration?
ndikkkoeoedrjf
Definitely the result of salt water
Perfeito a restauração, não da para acreditar, que era aquela moto toda acabada. És um grandeeee ,profissional. PARABENS!! Salvador-Ba
You're a great mechanic!
Very entertaining. A video of how the bike was prepared to look like it did at the beginning of this part would be even better!
When I saw the bike first time, I assessed it as a bunch of grab and that you will never restore it. I watched every step you did and could not believe it. You did an outstanding job with patience and knowledge and you never gave up. Bravo, excellent, perfect performance.
I love to watching restoration and cleaning clips.
Seen so many of car, bike, boat and engine restoration.
However, This is definately NEXT level of restoration.
Wow.. keren abis..I can't coment much..about thwe work of the man..amazing..fantastic is relefan for him..
Супер золотые руки золотым рукам цены нет все грамотно молодец дай бог тебе здоровья крепкого .😊
Золотые руки, золотых дел мастер,Бльшой респект ему!!!!!!!!!!!!
скажу как автомаляр что говно этому пластику цена,покрасили на нерасшлифованный грунт вся краска облетит через полгода)какие там золотые руки.
@@user-vm9md3bo8vбог с ним с краской) карбюраторы настраивать и синхронизировать нужно) троит как не знаю что) неизвестно еще что там со смесью происходит) долго в общем ему не жить) как контент - оч зрелищно, а с точки зрения качества - весьма посредственно
@@JokeR_2706 ну я и не только про покраску,тоже вижу все моет водой какой-то химией внутренние части двигателя какой бред.хотя для их страны возможно это норма.
Im impressed! These guys are talented and could build or fabricate anything.
Ini org restorator bintang 5..mantap..skill tingkat master..ga ada obat..
Wow, thunder storm😍😍
Work is magnificient!
This video is an inspiration to all “do it yourselfers” out there. Amazing work. Amazing commitment to the details, amazing use of tools and resources! Most importantly… amazing results! Thank you for the video. 😎👍❤️
You never know. Maybe in a future video of his he will restore a Saturn V rocket and go into space. Move over Elon.......
You guys are insane. You have made your own tools, rebuilt the whole body from scratch, rust removal through electrolysis what not. I wonder how long it took them to do all this. A lot of work. Kudos, great stuff.
mi
.
100% see how clean it was under that oil cap and when they took the air box/manifold off whatever it is.
Полный развод на видео….
@@user-sp7fh3hg9q sao bạn lại nói vậy , người Việt Nam rất chịu khó và tận dụng những món đồ còn sài được.
²¹ Entraram em Cafarnaum e, logo no sábado, indo ele à sinagoga, ali ensinava.
²² E maravilharam-se da sua doutrina, porque os ensinava como tendo autoridade, e não como os escribas.
²³ E estava na sinagoga deles um homem com um espírito imundo, o qual exclamou,
²⁴ Dizendo: Ah! que temos contigo, Jesus Nazareno? Vieste destruir-nos? Bem sei quem és: o Santo de Deus.
²⁵ E repreendeu-o Jesus, dizendo: Cala-te, e sai dele.
²⁶ Então o espírito imundo, convulsionando-o, e clamando com grande voz, saiu dele.
²⁷ E todos se admiraram, a ponto de perguntarem entre si, dizendo: Que é isto? Que nova doutrina é esta? Pois com autoridade ordena aos espíritos imundos, e eles lhe obedecem!
²⁸ E logo correu a sua fama por toda a província da Galiléia.
²⁹ E logo, saindo da sinagoga, foram à casa de Simão e de André com Tiago e João.
³⁰ E a sogra de Simão estava deitada com febre; e logo lhe falaram dela.
Marcos 1:21-30