Ciao Daniele, tutte valide e veramente a costo zero, ma lo spellafili è diabolico! veramente ottimo! più semplice di tutti quelli in commercio e più sicuro di un coltello sguainacavi senza contare che con le forbici da elettricista se non hai la mano spesso si tagliano dei trefoli! ciao e ai prossimi video
Grazie Zola, il taglierino l' ho creato li per li, non avevo un' idea ben definita, mi è venuta mano a mano che lo costruivo visto che, se lo dovessi rifare adesso, lo farei molto più funzionale.
@@DanieleTartaglia beh posso dirti che è veramente un bomba così... se magari hai voglia di fare un upgrade sarei curioso ci vedere cosa ci aggiungi, ciao
Davvero belle idee originali, bravo e bel lavoro. Con il bullone forato ho avuto un bel flashback tra i miei ricordi felici. Un caro saluto. Ciao Daniele
I think your definitions of simple and no cost are completely different from mine. For one thing, with the cost of all the tools and hardware needed to make these DIY tools, is it really that out of reach to just buy the actual tools needed to perform those functions? That being said, I do admire your ingenuity.
The first 2 are real life hack if you ever done those work. They need special tool to be done, but screw and wrench are way too common, so if you're not a worker who already have those tool lie around, you don't have to buy those tool just to work it out on some hole in your house. And yea, it'll definitely save you some bud if you buy those tool just for 1 time use.
il rivetto filettato funziona anche in un foro cieco, ovvero ha una buona tenuta, riempie uun foro poco largo all'estremita? ci sn anche misure piu lunghe, tipo da 1 cm o circa? grz
@@DanieleTartaglia Qualcuno, l'ho preso anch'io, e sembrava strano, poi, ho un piccolo canaluccio, ci può stare... Vuoldire, che facciamo qualcosa meglio di loro, lasciamoli rosicare... Buona serata... Ottimo lavoro, comunque!
The cable stripper is really great. I will make my own later. Thanks a lot. Your work is always precise. Keep safe in Italia. Are you living in Italia?
For me this cable stripper seems useless. I do same cable stripping with usual knife with trapezoidal blades. Same result, and faster. But I really like his ideas with rivets. Rivet guns are quite expensive, and if you need to install just few rivets this devices can really help you.
I would like to disagree. The cable stripper works similar to some "professional" tools I own, and should work fine and keep your fingers safe (and also look better than my tools). The rivet tools, on the other hand, seem to work but are really slow. I own a couple of rivet guns, and normal rivets as well as rivet nuts only take a couple of seconds to mount using them. And they are not really expensive, for 20 to 50 bucks you can get some decent ones that save you a lot of time if you use rivets more often. If they save me a few hours of work, they've paid themselves off.
Sorry, I am not familiar with rivet guns since I have not used it before. But for wire stripper, I have used some professional ones. It is really good of course. But for doing the thing in a different way, especially do it use your hand made tools it gives you some sense of accomplishment. Otherwise the invention channel in UA-cam has no meaning existence. His work always precise even from small things. I like his work very much. Also I will Hacker his work in a different way. In fact, recently I have done one of them. Just begin. I am shamed my rough work compare with his fine art masterpiece. You can check here if you want to say no again. Thanks. ua-cam.com/video/nTv8POgD8Fo/v-deo.html @@wernerviehhauser94
@michel777ification factory-made knife looks worse than this device? Hmm, interesting thought... Not agree! And if it you can not control the depth of cutting, maybe you just need more practice. Of course, I know about special tools "cable strippers". Yes, I use them when working in workshop. But, for portable use I prefer small and multifunctional tools which I carry in a small bag with me.
Top top top.... Amazing.. Thank you Super si, najvise mi se svidjaju stvari oko lemljenja, fluksa i sl. Lemilica T80, tinol zica.. Pratim te doveka. Hvala ti.
Ehi Daniele, buongiorno. Mi è piaciuto molto il tuo tagliafili / spelafili. Che idea assolutamente geniale. Grazie compagno. Dall'Australia. Ciao... :)
Bro. You are geneous. It's excellent, superb idea. Its a innovative & very useful tool. I appreciate your brilliance. Wish you all the very best for the future projects.
You really didn´t get it. I think he has more tools than a hardware store. He just give you examples to save money and build such tools the easy way. Stupid idiot!
The wire stripper is very appealing, but, instead of a wingnut, some kind of spring-loaded lever would be an improvement with a blade-stop!?!??! for each wire diameter......so none of the strands gets nicked....?!
No cost solution indeed, but you need to have a grinder, a 3 types of vise, a vertical drill, a belt sander. OBS: I'm just beeing sily, don't take it serious.
Seguo tutti i tuoi lavori con estremo piacere, bravo Daniele! P.s.: l'ultimo lo farò anche io 😊 non tanto per i cavi di piccola sezione, io lavoro spesso con cavi più grandi
Ciao mi chiamo Raffaele, ho 'un problema sull' impianto elettrico di casa mia, mi scatta spesso il salvavita e non riesco a sapere da quale punto sia il problema, mi potresti dare una mano grazie
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Ciao Daniele,
tutte valide e veramente a costo zero, ma lo spellafili è diabolico!
veramente ottimo! più semplice di tutti quelli in commercio e più sicuro di un coltello sguainacavi
senza contare che con le forbici da elettricista se non hai la mano spesso si tagliano dei trefoli!
ciao e ai prossimi video
Grazie Zola, il taglierino l' ho creato li per li, non avevo un' idea ben definita, mi è venuta mano a mano che lo costruivo visto che, se lo dovessi rifare adesso, lo farei molto più funzionale.
@@DanieleTartaglia beh posso dirti che è veramente un bomba così... se magari hai voglia di fare un upgrade sarei curioso ci vedere cosa ci aggiungi, ciao
Davvero belle idee originali, bravo e bel lavoro. Con il bullone forato ho avuto un bel flashback tra i miei ricordi felici. Un caro saluto. Ciao Daniele
Ti ringrazio :-)
Muchas gracias desde Nicaragua
Queste idee sono OTTIME, FAVOLOSE!!!!👍👍👍👍👍
Excellent Danielle
Fatti! Bravo siamo compatibili....
thanx
Muy..pero muy ingenioso. Gracias por compartirlo. Saludos de Uruguay🇺🇾 Roberto...un viejo apasionado de la mecánica y las motos.
Grande Daniele sei il numero 1
What was that first thing called? A nut sert or something? Where do you buy those?
Ottime soluzioni ! Grazie Daniele ....
Nice creative ideas
All of them are the best but third is super
3 simple easy to make useful items. The best video like this I've seen for ages, thank you.
BRAVO PRIJATELJU.
The last tool is very good, i think i will try to do something identical👍
Just use pliers.
Super ❤
La mas inspiradora pagina. Saludos desde Panamá Big Fans.
Super Video.Danke!
Grande, che percorso scolastico bisogna fare per fare questo?
Quello che fa lui non lo insegna nessuna scuola, è un dono che se lo hai sei molto fortunato...
I think your definitions of simple and no cost are completely different from mine. For one thing, with the cost of all the tools and hardware needed to make these DIY tools, is it really that out of reach to just buy the actual tools needed to perform those functions? That being said, I do admire your ingenuity.
The first 2 are real life hack if you ever done those work. They need special tool to be done, but screw and wrench are way too common, so if you're not a worker who already have those tool lie around, you don't have to buy those tool just to work it out on some hole in your house. And yea, it'll definitely save you some bud if you buy those tool just for 1 time use.
@@justalonglivednoob all
I agree. Not all DIY; in fact, about 90% are being done with all modern tools. In any case, the efforts and ideas are appreciated.
Merci pour vos nouvelles astuces. Bonne continuation et à très bientôt.
il rivetto filettato funziona anche in un foro cieco, ovvero ha una buona tenuta, riempie uun foro poco largo all'estremita? ci sn anche misure piu lunghe, tipo da 1 cm o circa? grz
This is brilian idea, good job
Fantastico amico, non capisco che gusto ci trovano a mettere i Dislike, non li meriti!
Lasciali mettere, si vede che qualcosa non gli è piaciuto :-) Problemi loro, io non ci faccio caso.
@@DanieleTartaglia Qualcuno, l'ho preso anch'io, e sembrava strano, poi, ho un piccolo canaluccio, ci può stare... Vuoldire, che facciamo qualcosa meglio di loro, lasciamoli rosicare... Buona serata... Ottimo lavoro, comunque!
Wow like my friend 👍
Bellissimo lavoro!
Idee semplici e buone.
Congratulazioni!
Good shearing tutorial 🙏🙏
Hi!! Very good tool!, Congratulations, Carlos Alberto from Brazil
Cool ideas keep them up
Great tools.thank you so mutch...
The last solution to tricky .. better use cutter blade directly .. for no 1 and 2 I agree good solution.. thanks for share
Muchas gracias por el video
thanks for the video
Very good...👍
All 3 tools are good.
The cable stripper is really great. I will make my own later. Thanks a lot. Your work is always precise.
Keep safe in Italia. Are you living in Italia?
For me this cable stripper seems useless. I do same cable stripping with usual knife with trapezoidal blades. Same result, and faster. But I really like his ideas with rivets. Rivet guns are quite expensive, and if you need to install just few rivets this devices can really help you.
I would like to disagree. The cable stripper works similar to some "professional" tools I own, and should work fine and keep your fingers safe (and also look better than my tools). The rivet tools, on the other hand, seem to work but are really slow. I own a couple of rivet guns, and normal rivets as well as rivet nuts only take a couple of seconds to mount using them. And they are not really expensive, for 20 to 50 bucks you can get some decent ones that save you a lot of time if you use rivets more often. If they save me a few hours of work, they've paid themselves off.
Sorry, I am not familiar with rivet guns since I have not used it before. But for wire stripper, I have used some professional ones. It is really good of course. But for doing the thing in a different way, especially do it use your hand made tools it gives you some sense of accomplishment. Otherwise the invention channel in UA-cam has no meaning existence. His work always precise even from small things. I like his work very much. Also I will Hacker his work in a different way. In fact, recently I have done one of them. Just begin. I am shamed my rough work compare with his fine art masterpiece. You can check here if you want to say no again. Thanks. ua-cam.com/video/nTv8POgD8Fo/v-deo.html @@wernerviehhauser94
@@TubeUnderdeveloped interesting idea!
@michel777ification factory-made knife looks worse than this device? Hmm, interesting thought... Not agree! And if it you can not control the depth of cutting, maybe you just need more practice. Of course, I know about special tools "cable strippers". Yes, I use them when working in workshop. But, for portable use I prefer small and multifunctional tools which I carry in a small bag with me.
I watch you from Iraq ❤️ You are awesome keep going ❤️
Very smart daniel 👍🏻
WoW grande!!! Bellissimo lo spelafili, meglio di quelli in commercio!
isolation removal tool is fantastic !
Creatività e precisione. Davvero molto bravo
el rivet se ve que no es tan duro, de que material es o como se pide, hay de varios materiales y cual usaste? Gracias
Super idea sir
Un clásico , no nos deja de sorprender... muy interesante vídeo , sin comentarios....
Does anybody know the name of the original song played at 2:00? thanks in advance.
Is "Cyber Warrior" (Iaio)
ua-cam.com/video/eZCwhJeZpz0/v-deo.html
Simplemente, sensacional, felicitaciones por tu canal
Bellissimo, continua così.. sei il numero 1 in the world.
Grazie per queste tuo vídeo.
Top top top....
Amazing..
Thank you
Super si, najvise mi se svidjaju stvari oko lemljenja, fluksa i sl.
Lemilica T80, tinol zica..
Pratim te doveka.
Hvala ti.
Ehi Daniele, buongiorno. Mi è piaciuto molto il tuo tagliafili / spelafili. Che idea assolutamente geniale. Grazie compagno. Dall'Australia. Ciao... :)
Great job, good job, see you all
How much are wire strippers in your country? Because if you can afford all the tools and material to build one....it just feels counterproductive
Dany ma il bulino a scatto dove lo trovo?
Su banggood, lo trovi nel video che ho pubblicato un po di giorni fa
The best one...
love it
Awesome IDEAS !!! 😎👍🏻👍🏻👍🏻
Very admiring!!! Really appreciate your hard work... 👍🏻
Tronçonneuse télescopique
The last one is quite useful
Hello, can you tell me, what is the diameter at the top (flat part) at 12.4 mm countersink drill bit ??? Thank you ...
super cool
Super
Great 👍
Last idea was impressive.
nice video
Bravo!
Top job come sempre; utili e raffinati. Grazie.
Super Einfälle meinen Respekt!!! Weiter so 👍 💪 🇩🇪
Good my dude
Excellent photography
Hai qualche misura sull ultimo progetto?
Great video. Thanks
The last is awesome
Nice tools
Bro what is the name of special nut used in 1st video??
bravissimo come sempre!!
clever and imaginative. great video.
Good ideas 👍
👏👏👏👏👏👏 cool idea
Bro. You are geneous. It's excellent, superb idea. Its a innovative & very useful tool. I appreciate your brilliance. Wish you all the very best for the future projects.
all 3 are super , pls change topic to revetting for simplified youtube search
great!
4:04 what is this tool name?
нашел, кернер автоматический
Great. Chariots of Fire, Vangelis?
Ciao Daniele, very good this projects!😉
Can you make a video on how to make Honey Comb design Grill on Acrylic without using CNC Machine?
How can I use LCD or LED screen recovered from smart phones and tablets.
Very helpfull idea thnx Daniele
excelente..
Ingenious talented and very creative, great video Thank you for teaching.
Ножик для снятия изоляции очень понравился!
Useful! Your genius is my favorite subscription. Allen, U.S.A.
awesome bro 👍👌
ma che superiori hai fatto ?
Really? Do have all these tools but not revit clamp or wire stripper? WOW man
You really didn´t get it. I think he has more tools than a hardware store. He just give you examples to save money and build such tools the easy way. Stupid idiot!
gercekten süper yetenek ve beceri takdir ediyorum
che bell'invenzione quella dello spella cavi!
The wire stripper is very appealing, but, instead of a wingnut, some kind of spring-loaded lever would be an improvement with a blade-stop!?!??! for each wire diameter......so none of the strands gets nicked....?!
No cost solution indeed, but you need to have a grinder, a 3 types of vise, a vertical drill, a belt sander.
OBS: I'm just beeing sily, don't take it serious.
this is only as educational purposes, wire stripper are really cheap, so not point in doin one yourself.
Superp video
Seguo tutti i tuoi lavori con estremo piacere, bravo Daniele!
P.s.: l'ultimo lo farò anche io 😊 non tanto per i cavi di piccola sezione, io lavoro spesso con cavi più grandi
Infatti, ne voglio fare uno più avanti anche per quelli :-) grazie comunque
Top demais suas ideias
Ciao mi chiamo Raffaele, ho 'un problema sull' impianto elettrico di casa mia, mi scatta spesso il salvavita e non riesco a sapere da quale punto sia il problema, mi potresti dare una mano grazie