Komatsu PC220-7 low power,shaking pilot control how to repair

In this video of komatsu pc 220-7,we will show all at my simple way on how to fix, the main reason of low power and shaking pilot control lever, keep on watching
pls. like share and subscribe my
1.,KOMATSU PC400-8 SERVICE MENU SECRET CODE TO ACCESS, MONITORING ERROR, HYD. PUMP PRESSURE, AND MORE.
• KOMATSU PC400-8 SERVIC...
2.,MAIN RELIEF VALVE, KOMATSU PC220-400/7&8 REPAIRING CAUSE OF VIBRATION OR SHAKING OF PILOT LEVER.
• MAIN RELIEF VALVE, KOM...
3.,KOMATSU PC 220/228-6/7 PC & LS PROBLEM ENGINE ITS OVERLOAD OR ALMOST STOP WHILE WORKING.
• KOMATSU PC 220/228-6/7...
4.,KOMATSU PC400-7 TUTORIAL HOW TO CUTOUT THE INJECTOR SIMPLE PROCEDURE.
• KOMATSU PC400-7 TUTORI...

[@pc228rondineu6]

Kumusta kaibigan, maraming salamat sa napakapaliwanag na video na ito, salamat sa pag-iwan ng mga subtitle sa Portuguese kapag maaari mo, pag-usapan ang higit pa tungkol sa mga pag-andar ng mga control valve, isang malaking yakap mula sa Brazil.👍👏😀🙏

[@caterpillarjhunhunk]

Thank you bro

[@adriansuarez4454]

mdami pa po kya lgi ako ng aabang ng mga post mo video ser

[@jhunbikersvlog2260]

pwede nman ung mga simple trouble shooting n kailangan mo n kya ko gawan nang video

[@adriansuarez4454]

sna ser mdami ka pa ma i post na video pra mdami pa matulungan at matuto tnx

[@jhunbikersvlog2260]

oo nga sana, medyo mahirap din ksi gumawa nang video lalo n nagiisa lang ako, anu b video ang nais mo malaman

[@malikawanawan1714]

Thank you sir very nice video I love you you are genius best training

[@caterpillarjhunhunk]

thanks

[@adriansuarez4454]

yun nga po ser pag mlamig pa hydrolic ayaw gumalaw ng unit mtigas ang mga stick gusto ko tlaga manood ng vlog mo kc actual lhat kya mdali cia mkuha

[@angelo67ful]

Good job Sir, sana matuto din ako.Boboy of Dumalag Capiz

[@caterpillarjhunhunk]

salamat sir. tyagaan lang kkkayanin mo yan

[@M.Mohsen-h9e]

Many thanks.. Mr

[@caterpillarjhunhunk]

Welcome bro

[@bruceleeablan2265]

I love the way you teach sir,,,,,, thumps up

[@caterpillarjhunhunk]

thanks sir

[@doriancharles608]

Excellent presentation thumbs up too you thank alots

[@caterpillarjhunhunk]

thanks bro

[@dhirgasyarif1795]

good,,from Indonesian

[@hnn9760]

Thank you Mr it is good video 👍

[@caterpillarjhunhunk]

thanks bro.

[@kedarkarki6601]

very good video brother

[@caterpillarjhunhunk]

thanks

[@excavatermachine7183]

Nice 👍🏻 bro

[@caterpillarjhunhunk]

thanks bro

[@nickgallo4228]

Thanks for sharing Sir thanks!

[@caterpillarjhunhunk]

wrlcome sir

[@adriansuarez4454]

ser ask ko po bakit nman po delay ciya sa umaga kailangan muna mg init bgo gumana ang mga control pc 228

[@kedarkarki6601]

thank you brother

[@caterpillarjhunhunk]

thanks also bro

[@joshuareddy6640]

hello master 😊

[@caterpillarjhunhunk]

yes what can i do for you

[@rukmalprasanga3674]

Suparb 👍👍

[@caterpillarjhunhunk]

thanks bro subscribe pls

[@rukmalprasanga3674]

Ok ok

[@999kkvba]

Hello sir, how are you? I hope you are fine. I want to know how to fix the pump pressure sensor because it is not working and there is a fau

[@rajbahadur2162]

Good video bro

[@caterpillarjhunhunk]

thanks bro

[@cagevlogschanel4527]

Thanks share idea

[@caterpillarjhunhunk]

thanks bro

[@youssefelammouri599]

👍

[@adriansuarez4454]

at mtigas ang joy stick

[@jhunbikersvlog2260]

matigas pero gumagana nman, tpos slow b ang paggalaw o movement nya or normal lang, kung mabagal at nag shaking ang handle,check mo muna same s ginawa ko dito s video ko, tpos mssg mo ako kung anu nakita mo, or add mo ako s messenger mo
jhunhunk

[@shelladurana5787]

sir tanong klng.po san po kinukuha ang 11 12 for diagnose

[@caterpillarjhunhunk]

sorry po sa late reponse, para saan b yang sinasabi n 11 to 12 anu

[@andersonavila9553]

Sir tanung ko lang poh mahina poh boom up at pawala wala ang supply Ng steer poh at kung pinatay sir ang backhoe pag start poh ulit nahihirapan hard start sir pc 220 _6

[@edwinignacio8519]

Good day Sir how to know when will the PC,
Ls,
Reducing valve,
be adjust? Cause any of of those can overload the engine and low power movement?

[@caterpillarjhunhunk]

tell me what is the situition, type of problem

[@mohmdzeid9526]

#Caterpiller Jhunhunk Thanks bro, beside 11 and 12 what other important numbers we may need while diagnosing this machine?

[@caterpillarjhunhunk]

there is one more, if you open s service menu the first number or number 1 that is a error code if there is unusual filling by operating the machine you can see at that place first number or 1 you can see there if error is active if there is E under the number not active or only log error showing number only

[@vienmontalban9384]

Sir ask lang Po pc220 komatsu excavator ay mahina Ang power pag etravel mahina Ang rolling nya

[@caterpillarjhunhunk]

mag pressure test muna kyo kadalasan low power low pressure

[@vienmontalban9384]

Thank you sir

[@mr.jepoystv3992]

bos pwde magtnong ano kya problema ng kumtsu nmi gnyn din model mhina na xa gumalaw lalo na.pag uminit na salamat

[@caterpillarjhunhunk]

sinsya n bos ngayon lang nabasa message mo, ok nb machine mo

[@japetenad5094]

Good pm makitanung lang yong backhoo namin dx500 bigla lang nag pre willing ang swing

[@caterpillarjhunhunk]

paanung nag pre willing as in hindi nba nag swing pa o nagsswing p nman,kpag nagsswing p sya ppwede ung swing brake nya eighter nwalan ng pressure to brake or na damage n ang brake,kung d n talaga gumana ang swing ppweding nsira n ang swing motor or ung planetary kya d n mapigilan ng swing motor brake,yan lang ang naiisip ko n pweding maging dahilan basi s kwento mo

[@reynaldoramos-yr8up]

good pm!the same lng po b yan s pc60 ?

[@caterpillarjhunhunk]

Medyo magkaiba sila ng system pero same lang ng adjustment

[@abdoulfatah1774]

Comment❓ ont règles le Unjeucteur dé komatsu 220 Acha

[@caterpillarjhunhunk]

sorry bro can you pls write on english language

[@bossm.736]

Hello po ano prob ng pc228uslc-1
High rpm pag operation na or steer sya namamatay makina.

[@caterpillarjhunhunk]

ganito try mo munq check ung supply nang solenoid n nka attach s hydraulic pump dpat un kpag nka on ang susi may supply dapat un, tpos obserbahan mo rin ang makina bka low power n rin

[@bossm.736]

Sir ung dalawang solenoid sa main pump po. Wala po sya supply. Pag nilagyan ko po sya ng supply humihina po ung oparation niya po kahit nka high rpm na po ung makina.. pag tinanggal ko po ung supply ng solenoid sa main pump. Malakas po ang operation kaso pag travel po sya or e steer po namamatay ung makina.

[@caterpillarjhunhunk]

@@bossm.736 ganun b nkalimutan ko sabihin yung solenoid n nsa bandang labas ung permanet supply n nagmula s ecm nya ung s bandang loob nman nka on lang ung hanggat hindi ginagamit o standby lang kpag ginamit mo n un solenoid n nsa bandang loob mamatay yan kpag full operation k tpos magon ulit kpag tumigil k isang solenoid lang ang gagana ung nsa bangdang labas lang, add mo ako s messenger
jhunhunk pra maipaliwanag ko syo kung anu gagawin

[@bossm.736]

@@caterpillarjhunhunk
Copy sir salamat add po kita

[@johnfonte4583]

Do you have contact? from PH here. may PC220 lang sana po need ng consultancy! salamat po!!

[@caterpillarjhunhunk]

whatsapp sir 00971567581176

[@johnfonte4583]

@@caterpillarjhunhunk message sent po sir!

[@hermanfrans9169]

🙋‍♂️👍🤝

[@caterpillarjhunhunk]

thanks for supporting my channel

[@paklong2782]

Is,it ,PC 200_7 and 220-7 the same unit or not ,if the same haw about MRF there are diffren or not ,thank for you sear me sir,🙏🙏🙏🙏🙏👍

[@caterpillarjhunhunk]

almost the same everything,only number model is different, and if you look in parts catalog only one

[@paklong2782]

@@caterpillarjhunhunk thanks

[@danielbeldua2020]

Sir can i ask the problem of my hb205-1 we convert it into manual swing motor but my problem is its slow but if u use another stick together with swing its fast

[@caterpillarjhunhunk]

Can you contac me in my whatsapp [phone]

[@lucianocoelho1872]

Sir, I may be missing from your WhatsApp, I have a problem with the Caterpillar 320c excavator, it is out of power, help us Sir!.

[@lucianocoelho1872]

I would like to send a video

[@giovannicabatuan4752]

Gudday sir,, ano kaya problema sa unit namin pc200-7,, pag dalawang control ang pag sabayin, mag low power siya,, kahit nka full rpm siya

[@caterpillarjhunhunk]

tika tanung lang anu b ang sitwasyon,natry nyo nba ang individual travel motor front pump at rear pump, yan ang magiging basihan mo nang tamang pressure nang front at rear pump hindi lalabas s monitor kung maling position nang travel motor dpat sakto sya s left travel pra s front and right pra s rear ganun dapat pra malaman mo kung tama b ang pressure bawat pump

[@caterpillarjhunhunk]

saka ang pagtest nyan lalagyan mo nang pin o solid steel ang travel motor, or kung kya abutin nang bucket ang truckpad ppwede rin un forward lang

[@caterpillarjhunhunk]

ngayon kpag ok ang pressure nya basi s sinabi ko kung paanu malalaman kung tama ang pressure nang front at rear pump, check nyo ung solenoid n dalawa un ung 2stage solenoid at merge divider solenoid nagkakasupply b o hindi, ganito kung mkikita nyo ung accumulator mula doon 1 ppc lock 2travel junction 3merge divider 4travel speed 5swing brake 6two stage papunta nang main relief valve ang dlawang hose nya taas at baba

[@caterpillarjhunhunk]

meron kbang whatsapp at send ko syo ang shop manual pra may basihan k s mga e ccheck mo

[@giovannicabatuan4752]

@@caterpillarjhunhunk messenger lang sir,, gyu cabs account ko,, nilagay ko sa swing lock pra makita ko max presure, relief

[@GameFreak69]

Can u teach me sir? How can i contact u?

[@caterpillarjhunhunk]

[phone] whatsapp me

[@richardomuka4470]

Hello sir do you offer training

[@caterpillarjhunhunk]

what do you mean training,try to contac me in whatsapp [phone]

[@benjamingorospe924]

Bro ung gamit ko n backhoe pc220..pg ikamot at I travel nabubulunan mamamatay Ang makina ano Ang problem bro

[@caterpillarjhunhunk]

brod ikutan mo yung hydraulic pump mo bka yung solenoid doon eh wlang supply check mo dapat may supply pag on mo p lang ng susi kung wla power try mo lagyan ng direct n suppy mula s battery make it sure mo lang h s mismong positive ang lagyan mo supply

[@benjamingorospe924]

Xn ba banda mkikita Ang solenoid sa hydraulic pump bro

[@caterpillarjhunhunk]

nka attach mismo s main pump s gilid

[@vincentjondonero1967]

Ser,ung pc100 nmin nka high sya halos namamatay making,kpag nka low nmn,halos ayaw gumalaw,ano po ba mgandang gawin,salamat po

[@caterpillarjhunhunk]

sir hindi ko alam kung paanu namamatay ang makina or sabi mo sinisinok ba,?ppweding kinakapos ng diesel or ppwede rin barado ang fuel line kya kapos ang pasuk ng fuel yan ang pweding maging sanhi ng paghina ng makina,ngayon kung nkakasiguro k n malakas at walang problema s makina e check nyo doon s main pump kung may nka attach n solenoid,kung meron check nyo bka walang power supply,ppweding yan din ang dahilan kung bakit ang makina halos namamatay kpag ginagamit,kung my solenoid at may supply magcheck n kyo ng pressure ng main pump pra sigurado baka nagover pressure n or baka may naglock n valve,unahin nyo n rin tingnan ung main relief valve after nyo ma check ang mga nasabi.ha

[@vincentjondonero1967]

@@caterpillarjhunhunk may 2 solenoid po.. kpg po nkakabit ung Isa hnd nmn po sinisinok yun NGA lang mdyo mabagal pero kpg tinanggal kuryente sa solenoid bumibilis yun NGA lang sinisinok kpg nka high sya..

[@caterpillarjhunhunk]

check nyo muna pressure ng main pump ppwede ksi n may problema n ang main relief valve kya mahina pressure kpag nkakabit ung kuryente ng solenoid, ska mo lang malalaman, n mahina pressure from main pump kpag nagactual. checking ng pressure. 350 to 370 pressure dapat nyan

[@ride3934]

Sir gud eve po.merun po ako pc60 komatsu po.ayaw po mag jack up po sir.turuan nyo ako sir

[@caterpillarjhunhunk]

pc 60- anung dush nya -3-5-6-7 pra alam ko ung system, alin ang d magjack up tyre excavator b yan at meron sya jack o boom up

[@ride3934]

@@caterpillarjhunhunk sir pc60-5 po komatsu po.sir turuan nyo po ako sir.maraming salmat po

[@ride3934]

Boom up po sir ayaw tumaas po yung truck pad po sir

[@ride3934]

Excavator po sir

[@ride3934]

@@caterpillarjhunhunk sir anu fb nyo po sir para matawagan ko po kayo sir

[@rogercaacbay2103]

sir good day po, sir anu kaya problema kapag mabagal travel sa kanan pero pag ginalaw mo liver bumibilis sya

[@caterpillarjhunhunk]

ganito gawin mo pra malaman mo kung ang hydraulic pump n nagpapatakbo dyan s travel mo n mahina, gayahin mo ung nsa video lagyan mo ng pin o solid n bakal ung travel motor n mahina tpos punta k s service menu ng monitor at check mo ung pressure nang main pump mo n nagccontrols travel n mahina, kung mahina na ang pressure nya n dapat 390 +10/-20 ang tamang pressure kung bumaba sya dyan s normal nya ppwede repair mo muna ung main reliefvalve nya baka makuha p s adjustment sundan mo lang video n ito ha,. ok kya add mo ako s watsapp [phone] or messenger jhunhunk pra makapag usap tyo ng maayus, at m guide kita

[@caterpillarjhunhunk]

kpag main pump mo n ang may sira malalaman mo dyan s main relief valve ksi hahapitin mo yan pahigpit pra s pagpataas nang pressure, ngayon kung mahina p rin pressure nya at sagad n ang adjustment nang main relief valve kailangan mo n pagawa ang pumpmo s marunong s pump at d n kakayanin p s adjusment yan gawin mo muna ung mga remedyo n ppwede ha follow mo lang video ko dyan lahat kung paanu

[@jillque3536]

gud day naayos po ba problema ng unit mo sir..pareha po twyo nang problema

[@caterpillarjhunhunk]

@@jillque3536 syempre nman kya nga nka post n yan s youtube kung paanu maayos at paanu inayus,lahat nang mga naka upload s youtube lahat yan wlang hiding agenda yan lahat yan basi s actual daily work ko ksi kung hindi nagok yan baka matagal n ako natanggal dito s work ko rust ang trabaho nmin nakaw nga lang ang paggawa ko nang video pra m e share ko s mga bago at d p masyado bihasa s mga ganyan trouble shooting.

[@giovannicabatuan4752]

@@caterpillarjhunhunk gud day,, hindi kc siya nag message sayo sir kung naayos ba ang unit niya,, kaya nag tanong ako,, so follow ko procedure mo pra ma check din unit namin

[@bjsolo4645]

Boss yung unit na pc 200 nag lolow idle

[@caterpillarjhunhunk]

anu bang pc200- 7 b yan or anu, kung nagllow idle b yan mga ilang minute sya n nagagamit ng maayos,bago maglow idle

[@vincentjondonero1967]

Sinisinok po sya..

[@NonproMechanics333]

Anong tawag nyan sir

[@caterpillarjhunhunk]

main relief valva yan

[@LeaMarquez-h7e]

Sir patulong nmn

[@caterpillarjhunhunk]

pwede nman whatsapp mo ako para mabilis usapan natin, pwede k mag send ng mga picture o video para atlist makita kung anu ung sinasabi nyo

[@LeaMarquez-h7e]

WhatsApp number mo sir?

[@danielsookraj9154]

Hi good morning l have a pc350 not moving

[@caterpillarjhunhunk]

hi bro sorry for late responce,totaly not move even little or movement or total disable,i dont know what is the exact problem

[@danielsookraj9154]

It is starting and everything but no movement

[@caterpillarjhunhunk]

hello bro i'm sorry for the late responce now, what to do is you have to open bottom cover of control valve in then after opening that cover check the solenoid under that control valve,from accumulator number 1 solenoid is the ppc lock once that solenoid not work your the machine totaly disable or unable to work

[@juliusbalmes2920]

wwwwwwwwwweeeee

[@willyjohndanan6752]

Sir may messenger kau

[@caterpillarjhunhunk]

jhunlambino messenger ko