I built a very similar Box 3 years ago with a Pioneer 10" DVC 4ohm D4, ran it from a Part Express Dayton 240 Watt Sub Plate AMP. Well Braced and yet most of the Bass was wasted off to the sides of the cab. It only sounded FULL when placed in a corner or in the back of my GMC Envoy. So I rebuilt another Cabinet but with a 4" Belled Port (5 would have been better) and never looked Back!
20-30 bucks for a large circular saw (I got 8 inches one), some screws, a drill, glue. Use glue and instead of a load of clamps, use screws to clamp it. Just leave them in, plaster over em. Sand down and paint. I use sealed only because less smearing (putting it very easily and fast but a lot of reasons to seal it, or not). Sealed would give you faster response overall but make sure you look up Q and EBP values to make sure the driver fits a sealed cabinet. (GRS 8 inch 8 Ohm for example will give you Q of around .7-.8 which is a tad high but it will be small and F3 around 40Hz-43Hz or so.) Dayton plate amps are cheap but if you are good and have a soldering iron you can build one in. If you have no clue and source has a sub out just get any amp, could be 1U (I got a Crown) bonus points if programmable so you can tune the signal.
i mean you could do it with a hammer would just take way longer. if you don 't own a hammer thats sad also drills should be a common household so realistically all you have to buy is the materials.
Use wood spacers clamped to the bottom of the jigsaw plate to slowly cut material perfectly straight. That will save alot of time sanding or filing it later. (Basically a guide to keep it steady and not track off using your hand alone from the vibrations the jigsaw causes.)
Friend would like a project like the box in this video for a 6-inch speaker, do you sell the project? with the measurements and cuts of the wood, the thickness and litre. Everything, do you sell projects like this?
Hello, I have 2 30 cm 600 rms presses. We made a special cabin for the house, but there was a mistake in our calculations. An average area of 350 liters was found for the passes, and I don't know what kind of Port we will use here.
Según el video y cuando presenta la regla calculo que el cajón mide 35cm. De alto , 40.7cm de fondo, 40cm de frente aprox..... Mdf 18mm 1.70ft³ aprox. Es correcto ??????
I built a very similar Box 3 years ago with a Pioneer 10" DVC 4ohm D4, ran it from a Part Express Dayton 240 Watt Sub Plate AMP. Well Braced and yet most of the Bass was wasted off to the sides of the cab. It only sounded FULL when placed in a corner or in the back of my GMC Envoy. So I rebuilt another Cabinet but with a 4" Belled Port (5 would have been better) and never looked Back!
what is a belled port? Google isn't helping
@@vincentcaudo-engelmann9057 Flared.
Just need to go buy a whole lot of tools to build my box now.
10 inch speaker, wood, amplifier, cable, aux
@@ikilyou1b What amp is cheap
@@Exotic69420 This video is in thai, so platinum x amp not too expensive but you need pre-amp too
20-30 bucks for a large circular saw (I got 8 inches one), some screws, a drill, glue.
Use glue and instead of a load of clamps, use screws to clamp it. Just leave them in, plaster over em. Sand down and paint. I use sealed only because less smearing (putting it very easily and fast but a lot of reasons to seal it, or not). Sealed would give you faster response overall but make sure you look up Q and EBP values to make sure the driver fits a sealed cabinet. (GRS 8 inch 8 Ohm for example will give you Q of around .7-.8 which is a tad high but it will be small and F3 around 40Hz-43Hz or so.)
Dayton plate amps are cheap but if you are good and have a soldering iron you can build one in. If you have no clue and source has a sub out just get any amp, could be 1U (I got a Crown) bonus points if programmable so you can tune the signal.
i mean you could do it with a hammer would just take way longer. if you don 't own a hammer thats sad also drills should be a common household so realistically all you have to buy is the materials.
Use wood spacers clamped to the bottom of the jigsaw plate to slowly cut material perfectly straight. That will save alot of time sanding or filing it later. (Basically a guide to keep it steady and not track off using your hand alone from the vibrations the jigsaw causes.)
I personally use screws and silicon sealant. That allows me to be able to take the box apart later if needed.
Friend would like a project like the box in this video for a 6-inch speaker, do you sell the project?
with the measurements and cuts of the wood, the thickness and litre. Everything, do you sell projects like this?
What is rhe dimension of the box?
Essa caixa ficou excelente, linda bem feito
Speaker box 8 se 10 inch ka kitna price hai
Bonjour super belle vidéo merci. C'est d'avoir les mesures des planches ou un schéma svp merci d'avance
Beautiful work.
อยากได้ตู้แบบนี้สั่งได้ที่ไหนครับ
that's pro build and cleaning from the dust
Nice super ganda. Mag kano na yan boss
Can I take the exact measurements?
Are their plans/dimensions available for this box? What size of subwoofer is this?
What size of subwoofer is this? 10", as said in the post title. 😁
10'inch size of speaker
She asking size dimension of speaker?
@@MasterPiece1954 STUP!D
Box sise
とても分かりやすい動画です。作り方がよくわかって、見ていて楽しかった。どうも有難う御座います。
What frequency does this box tuned to
Size kitne by kitne ka hai sir
Gonna try the same but dual opposed, sealed.
Please share box size
Please tell me details of the box size 🙏
Hello, I have 2 30 cm 600 rms presses. We made a special cabin for the house, but there was a mistake in our calculations. An average area of 350 liters was found for the passes, and I don't know what kind of Port we will use here.
what is the box measurement?
What kind of amp using in this sub woofer
I would like to get two 14" like this. How to get it. How much will it cost? Please let me know.
u should use filler to cover nail holes and sand it after
Medidas del cajón, excelente trabajo
Bhai ye enclosure order karna h kitna price lage ga or order kasse lete ho
Kindly share the full mesurements
He is not kind
Wow, please reply me the measurements of your box, i want to diy too, pls pls pls😊
Is the sound loud?
How many watts that 10 inch subwoofer
Box price one ???
Bosing dimension please..😊😊😊
can i ask the whole measurement side by side and hieght & width? thank you
output its not good, shaking noice?
Perfect and beautiful work ❤I like your skill ❤ this type of speaker not available in our country.
15" bass speaker and one twoter cabinet price
anong yong puti na parang glue na nilalagay mo lods bago mo ipatong dikit? at yong gamit mong Device pang butas na circle ?
Ini dimana ya ?
What is this song?
bhai niche ka hole chota karooo half krdo.jada khola hua h
Price with and without subwoofer
8:44 what's the name of this insturment?
Router
Size?
Perfect 🎉 👍😊
มีจำหน่ายที่ใหนครับ
What is the model of this speaker? Can you help me anyone?
Box eke length, width kiyada
Are you recommended to outdoor sir?
Sometime😅
@@rahulcreation_er thank you sir
Had me until he didn't use glue on the trim ring and the red electrical tape and wire coming out the port
IKR
I was like "professional" work until he didn't use wire terminals and the wire coming out of the port and creating vibration sounds.
Can you tell the measurements
Can we got exact measurement
ต้องบุใยสังเคราะห์ด้วย
No Boos sound 😢😢😢😢
Price ??
พร้อมเสร็จคู่ละเท่าไร
Bro I want full size nd measurements plzzzzzzz 🙏
bisa buatkan yg untuk sub 4 inch ?
Perfect made
Pioneer subwoofer two coil woofer box kitne mein milega
How much does it cost?
How to order your DIY
I purchase this
Woofer available ah ??
I want spiker box pls online link send
techno vibes energy melody
whats the measurement of the box?
Down hz ?
Según el video y cuando presenta la regla calculo que el cajón mide 35cm. De alto , 40.7cm de fondo, 40cm de frente aprox..... Mdf 18mm 1.70ft³ aprox. Es correcto ??????
The wiring should at the back for a clean view.
That is a test.. He's not gonna leave it like that😂
Necesito las dimenciones
Mấy a đóng loa Việt Nam nên xem để học hỏi mà làm theo, chứ mấy ông QC giỏi lăm mà thùng loa đóng chẳng ra hồn gì hêt
Nice brother
Price bro 10 inch
How to buy subwoofer
Iska price kitna hai
Cost how much for box
cara beli box nya gimana bang?
Pwede po ba walang butas kasi pinapasukan ng daga eh
What are the dimensions
How much price only woofer
quality bro👍👍
were are the measurements
দাদা কেবিনেট এর প্রাইস কত পড়বে?
What are the sizes
ไทย?
আমার একটা লাগবে কিভাবে অর্ডার করবো??
Info pemesanan ..??
wonderful 👍🏽❤
Mantaaappp rapii
Awesome video
Super 👌👌👌
Magkano po sa ganyan subwoofer box size 12".?
2 Box price
hm po ganyan at san loc
I think you need about 200 more nails in it,😂😂😂
Pyar ka price kya hai
Apna adress do bhai humko 4 box banvana hai
I want to buy
what this song 14:00
12" sub box price