The wheel on the thumbnail is 29mm 🤣 Thanks for watching! If you have more questions, here's the full article: www.tactics.com/info/how-to-change-skateboard-wheels
@@jtv0 That's partly true, consumers were much more savvy back then of the idea of wanting to get our full moneys worth out of everything we brought... and its truly amazing that the skate industry has never really been effected by inflation, its crazy to think skate gear from shoes to boards and everything inbetween have largely remained the same cost over decades. but beyond the global shift to mass consumerism in a world filled of products built with planned obsolescence... theres also been a general evolution of skateboard gear over the years to lighter components all around but especially trucks... theres also been major advances in urathene technology and many attempts at improving board technoloy/durablity with carbon fibers inserts and what not... these type of advances have dragtically changed the industry allowing skaters to ride wider boards and bigger wheels without all the additional weight that wouldve came along with such a setup back in the 90s. Growing up in the 90s street skaters rode narrow boards and small wheels. You could actually buy sub 50mm wheels at any skate shop back in the 90s, whereas nowadays companies begin there wheel sizing at 50mm. The common street wheels sizes in the 90s were anywhere between 40-50mm... nowadays people ride anything from 50-56mm for street/park skating. Some companes in the 90s even offered wheels that were sub 40mm. Wide boards with big wheels existed in the 90s too but were considered a vert setup back in the day. Nowadays essentially everyone runs a 90s vert setup... which makes a lot of sense considering how popular park skating is these days with true street skating becoming more and more obscure among todays youth skaters... which is simply an interesting observation of mine, since theirs obviously a bunch of other reasons why wide boards and bigger wheels have gained so much popularity but imo theirs definitely a correlation between the popularity of park riding and board and wheel size trends going wider and bigger.
i've been learning to skate for a year on a board that a friend set up for me using old parts lying around her house. i've just cruising around getting from point a to point b, haven't learned any tricks yet. finally started looking into upgrading some of the gear and upon googling the wheel brand i discovered that i've been riding on roller skate wheels this whole time 😂
working on skateboards for years eventually helped me working on cars later in life. learning to feel threads and if they strip and how much pressure to apply when tightening stuff and dealing with thigs that get seized also what to look for in degrading rubber bushings compared to mounts, belts, and ball joints on a car.
Gosh !! Seen that first wheel took me back to the early 90's when the technical skate was at the top and the wheels started to manufactured small as 35mm as I remember.. then I took dad's drill, put each one of my 55mm Cockroach wheels and against a sandpaper surface we made it to 40's or 38's jajaa the pressure flips and frontside pressures worked soo great that way
I got formula 4, 52mm wheels and have a flat spot thats pretty noticeable. I’ve had them for like 3 months. Not really sure where I went wrong, or maybe just unlucky. I rarely do power slides but skate almost every day.
Thx! It's been like 15yrs give or take a few since I skated. Just jumped back on the board a month ago and it's a breath of fresh air. I got another pair of bearings I wanted to try out and honestly couldn't remember how to get them off. This came right on time.
thank you for making these videos, im not a new skater but all the boards ive gotten until now have been completes and this video and your how to put together a skateboard videos have both been a huge and quick help to putting my new board toghether
Thanks. Tactics, I just got some new reds bearings and I installed them just as you said, and it really helped, they are rolling way better than my old ones😁
I live in Eugene OR and Tactics is the best shop around. Friendly knowledgeable staff (that actually skate) and great service. I will always go to tactics before shopping online or going to *cough* Zumiez *cough*
I remember when I was kid at the park people used to ride with those old tiny wheels. I feel like it was a style thing cuz I havnt seen anyone with those in forever
I watch this like I haven’t been skating since 1986 lol However I love that you guys take the time and do stuff like this..for New school, Old school or even Middle school skaters! Keep up the love for the lifestyle! Keep up the awesome work! Be safe out there all of y’all guys there at Tactics! My son and I will continue to support you guys! Truly thanks a bunch! You guys make a difference even if you don’t know that you do. 👍🤘✊🤙 🛹 🤗
@@ironninja9873 Formula 4 is Spitfire wheels' name for their proprietary chemical formula of urethane for their top tier skate wheels. Similar to Bones and their STF (Street Tech Formula) wheels. I hope that answered your question. Cheers! - Tim
This guy probably aint even trying or doesnt skate hard. My wheels lasted for YEARS, until i started to revert my tricks or try harder tricks that i couldn't "set straight" before landing, now they last 3 or 4 months before they sound like a motorcycle. Obviously wheels are still fine, but i hate that sound and also they are slower and that really matters when riding transition. For streets dudes, you can probably skate the wheels from 54mm to 49mm without issue.
I know there are a lot of differences between this and rollerskating, but my partner skates derby and we were wasting SO MUCH money on expensive bearings. After going through $1200 worth of bearings in one year (!!) despite cleaning and lubing them before every meet and practice session, out of desperation I went to the bearing shop I often go to as a truck mechanic and bought some sealed bearings from F.A.G. for $2.50 each. Two years later they're still perfect and we haven't cleaned or lubed them once. $1200/year vs. $20/year simply cannot be beaten. If you're an idiot and the thought of rolling around on that particular brand of bearings is off-putting, then just get the same thing from a different major industrial bearing brand like SKF, Koyo, or Timken.
yo, if you are reading this, here is how i got rid of my flat spot on my wheels, i took off all wheels and put one on a screwdriver at a time and held the wheel and the screwdriver around 20 degrees (slanted a little downwards) on a grind wheel until they were all smooth and all the same size and then smoothed them all out with a 1,000 grit sandpaper. so there is my hack i guess.
Thats the flintstones method. Better find someone who works at a shop with a lathe machine and just tell them to shave them until they are even, they will probably shave like 0.5mm off but the finish will be like brand new wheels.
Yo my man! Loved the video - super clean and simple. I've just bought a new board and I noticed some slight wobble with it as well as one wheel stopping slightly before the others. I'd love to see how to do a once over of the board to see that it's running smoothly. Some questions I would love answered are: How long should my wheels spin for? How close together should they stop? How straight should my board roll if I let it free-wheel without standing on it, etc. Cheers, bud!
It's very normal for one or two of the wheels to stop before the others. If they all can freely spin for 10+ seconds then you don't have anything to worry about. It's only really a problem if they stop abruptly after a few seconds. New trucks/bushings can be a bit sticky before they're broken in, so they'll stick in place and make your board auto-turn when you let it roll on its own. Just keep skating them and they'll break in and the auto-turn will fix itself. I hope that helps! - Tim
This actually really informative seeing kids with coned out wheels who have never heard of rotation bums me out that should be a featured video in and of itself if the title had wheel rotation in it I bet a lot of newbs would click it
Depending on how big and deep the flat spot is some machine shops with a lathe will machine your wheel down a mm or 2 to get rid of the flat spot and not sacrifice to much urethane
1:13 is that the noise of the bearings or is it run down wheels? My board has done it like once or twice but now it never does that. I loooove the noise tho
That's the sound of worn out wheels. Usually the flat spot works itself out after rolling on enough rough pavement. But really bad flat spots are super distracting and annoying. Cheers! - Tim
true, i had the same wheels for almost 10 years now and still look pretty good, a few cuts here and there but nothing big and it doesnt sound like a motorcycle. When i bought the wheels back then i actually bought 2 sets because i thought they were not going to last more than 2 years.
I bought a board from Braille about 5 months ago, and the wheels still have the little tread ridges on them, I’ve been riding a lot too mostly on rough pavement. Must be really shredding to get them down to 29mm.
You don't have to switch you wheels if you like them the way they are. It all comes down to personal preference in the end. But I bet every sidewalk crack is a cataclysmic event! Cheers! 😂- Tim
You're right, the wheel graphic would be facing in at that point. It's to keep the wheels from coning, which is when the outer edge of the wheels wear down faster than the inner edge of the wheel. It's usually not a problem if you have center-set wheels though (which most regular skate wheels are.) - Tim
@@Ar1Andas-s9e The only parts on the truck axle that are removable are the washers, bearings, bearing spacers, and the wheels themselves of course. As far as the wheels go, they're one solid piece of urethane and the lip isn't removable, so I'm still a little unsure of what you're asking.
Go for some soft wheels that have a slightly smaller diameter (53 - 55mm) like the Ricta Clouds or the OJ Plain Jane Keyframes, or the OJ Mini Super Juice Wheels. 👍 - Tim
i took off one of my wheels and its my first board and just got it i took off the wheel because there was dirt on the bearing and i wanted to clean it and when i put the speed washers,bearings,wheels all back on back together the wheel just would not spin as fast as the other three and I'm sure i did not tighten it to tight because it took the washer and spun it in-between my fingers and it would still spin slow i don't know if i should buy new bearings ?
You might have to rethread the axles to get the nut on. We have a truck maintenance topic on our list for videos. We'll try to get it done sometime soon. Cheers! - Tim
i just need to know how to change them. i’m just starting to learn to skate and i ordered softer wheels. i’ve been long boarding for like over 4 months and i’m used to softer wheels.
So your 8.0 deck is broken and you want to put a 7.5 deck on some 8.0" trucks? You can if you want to, but those trucks will be a little too big for a 7.5 deck. Maybe you could clarify? - Tim
Hay i have a big question but first let me tell you what happened so i was skating and having fun and then my flipping wheel comes off my truck??? and i think i broke my arm lol... but. How did my wheel come off? im really confused.
BROKE YOUR ARM!!!!! Wha!!!?? Is the axle nut or the axle threads that it that fell off of stripped? Can you tighten and loosen the axle nut all the way with your fingers? If you can, then you probably need a new axle nut so it doesn't loosen itself from the vibrations of riding. I hope that fixes your problem, and I hope your arm is all good! Cheers! - Tim
My first wheels were spitfires, im still riding them today with no flat spots. But they are lookin like they at a solid 45mm Instead of when i got them they used to be 53mm
Yep, and don't flip them so that it's the opposite side out, that way the contact patch will wear evenly and you won't get a cone shaped wheel. Cheers! - Tim
When we're referring to rotating the wheels, we're not talking about rotating the physical wheel, but more like musical chairs with which axle they go on. Usually when you rotate wheels, you keep them oriented the way that they are, so the outside part of the wheel becomes the inside when you criss-cross the wheels on the axles (thereby switching which way the graphic is facing). But since most skateboard wheels have a center set core, coning usually isn't that big of an issue and you can flip them what ever way you want. Really the whole point it to make you wheels wear evenly. I've noticed that my back wheels wear out faster than my front wheels (probably from powerslides) and when I rotate them, I just always keep the graphic out out of habit. Sorry for rambling, I was having a major brain fart when typing this out! 🤣 I hope that answered your question rather than making it more confusing! - Tim
It's so much easier to keep the wheel in the same spot just flip it . If the graphic is facing out ,turn them inward and vice versa other than some gimmicky wheels most are symmetrical
@@skinnymatt64 That works too! For me, if I don't switch my back wheels to the front at least once, my back wheels get tiny way faster than my front wheels. I'm not sure why, Maybe it's my weight distribution or they way I pivot things... Maybe I do too many mannys?🤔😂 Peace! - Tim
@@tacticsboardshop ive been a huge advocate for rotating wheels. yeah I thought that was kinda odd that your problem was more so the backset wearing out rather than the coning do you do alot of 180 tricks? I know personally I was big on 360 variations, and all my 180 flip trick needed to be caught atleast a foot and half in the are and rotated full with no pivot or I hated it lol , so maybe different styles have a huge impact on the wear of you wheels
@@tacticsboardshop coning is really never an issue if you don't run super wide wheels. The back wheels wear out faster for multiple reasons, slides ofc yes, but also shuv its and tres all wear the back wheels more when you pop. Also 75 % of your weight is on the back truck at most times
I remember when i use to skate, my boards wheels would forever spin (legit like 5 minutes or more non stop & everyone at the skate park wanted to buy my board / steal my board / or try to play skate to win it . my dads white hippie friend who he worked with at a bakery set it up for me i was so happy lmfaoooo i dont skate no more its been years.. i miss dropping in and going down big ass ramps not the basic size ones at the skateparks but aye that phase of my life was cool tho hahahaa...
For me the holes in the wheels that the bearings are inside of seem to have expanded and the bearing is loose in the wheel and seems to move around, should I get new wheels?
As long as the bearings aren't jiggling around too much or popping out, you should be fine. Just put a speed washer on the axle and tighten the axle nut just enough to secure the bearing, while still letting the bearings spin freely. What kind of wheels are they? - Tim
If you're using bearing spacers, (the one that goes inside the wheel and not the little speed washers that go to the outside of the bearings) you can tighten the axle nut all the way down and the bearing will still spin freely. If you don't use the bearing spacer, then you'll have to give it a tiny bit of slack to spin freely, but you shouldn't be able to see it shift on the axle. The amount of wiggle room should be less than a millimeter. I pretty much never use bearing spacers, and I usually just tighten the nut all the way, then just loosen it by approx. a 1/4 turn. I hope that was clear. Cheers! - Tim
I feel vibrations when I ride my board, how do I fix that? Do I need new wheels? I have spitfire formula 4 full conical and they where 56mm but now 49mm. I have been riding them for 8 month
It all depends on what you like. If you enjoy skating your 49mm wheels, then just keep skating them. But if the small wheels are making everything too rough and the vibrations are distracting and making everything harder, then you should probably get new wheels. 👍 - Tim
The bearings keep falling out of the bearing seat. It never used to do this, but now it's almost as though the bearing seat stretched out and now the bearings don't fit snugly. Is this bad?
I have 53 millimeter spitfire wheels and reds bearings but for some reason my bearings won’t go in. I’ve tried so many techniques and none of them have worked. Please help me.
@@mikegt5006 It can be really difficult to get the bearing in sometimes. Does it go in partially but you cant get it in fully? Or does it not even go in at all? Could you try going to a skate shop and have them use their bearing press? The standard 608 skateboard bearing is 22mm in diameter, maybe measure the diameter of the hole in the wheel to see if it's big enough? If the hole is too small, then the wheel is defective and you might have to exchange them. I hope that helps! - Tim
Bearing spacers let you tighten your axle nuts all the way without being pinched, allowing the wheel to spin freely. They're quite important for downhill longboarding where you need everything to be tight and secure, but for regular skateboarding, there isn't really a situation where you would need them. So use them if you want to, but they're optional. Cheers! - Tim
Are the wheels super stretched-out and old? Yeah, there's not much you can do for a wheel if the bearing slot isn't the right size. 😕 I guess if it doesn't really affect your skating and rides fine, you might be able to just skate the wheels anyway, but if they are falling off or cause your bearings to bust at a faster rate then you should probably get new wheels. Stay safe out there! - Tim
@@tacticsboardshop Thanks for the reply. The wheels are 14 years old. I felt it took lots of pushing to get them rolling properly. I've applied speed cream and I'll see how it goes.
You certainly don't have to buy new trucks and bearings when you get new wheels. But if you plan on swapping between frequently then it would be more convenient for each set of wheels to have its own bearings. Cheers! - Tim
Soft wheels will definitely be better for rolling on rougher surfaces. Soft wheels do however make some tricks harder, but you'll roll much more smoothly. 👍 - Tim
He really hit a pebble just for us... true respect.
😂😂😂😂
@@K-Auss i mean whats funny
And Maybe got a flatspot….
Lol
Gonna take my skateboard, to the tire shop down the road
I watched this like I haven't been skating for 10 years lol
camcane1 🤣🤣🤣🤣
i was gunna put i watched this cuz i connected with the thumbnail pic haha
Not gonna lie I just watch these videos because I get the high of putting on new wheels without actually buying new wheels. Real talk
Same but I never thought of rotating them diagonally, I always just rotated them in a circle. That's actually helpful.
15+
I feel like 80% of the ppl watching just clicked to see those tiny ass wheels hahaha
nectar I did, it brought back memories when I first started going to my old local park seeing all the other kids with worn down wheels like this
not wrong my friend, I've been skating for 15 years and i've never seen wheels that small. felt like i got click baited
I needed to know if they were real but no I have seen kids with tiny wheels like me lol
Yup
Haha definitely
The wheel on the thumbnail is 29mm 🤣 Thanks for watching!
If you have more questions, here's the full article: www.tactics.com/info/how-to-change-skateboard-wheels
Tactics Boardshop you guys should make an app! I would love to be able to get stuff easier from my phone
my record is 32
Tactics Boardshop I kinda want it pleeeeeeasee
@@tby8323 Nope, your bearings will be just fine!
Where can you find good wheels and how do you know if they are a good fit for you??? Please answer me I would really appreciate it. Thank you
1:13 I like that noise
Damien T it reminds me of those videos u see of the a-10s firing the massive gun
yes.
Yesss me too I thought I was the only one
the equivalent of putting a card on your bike as a kid to make it sound like a motorcycle
Everyone at my park rocked wheels like that when I was a kid lol
Garrett Sludge you must be hella old
Russian Pickle 25
I skated in the late 90s and prices then is the same as now. That’s why wheels and trucks were ridden till it actually broke.
@@jtv0 That's partly true, consumers were much more savvy back then of the idea of wanting to get our full moneys worth out of everything we brought... and its truly amazing that the skate industry has never really been effected by inflation, its crazy to think skate gear from shoes to boards and everything inbetween have largely remained the same cost over decades.
but beyond the global shift to mass consumerism in a world filled of products built with planned obsolescence... theres also been a general evolution of skateboard gear over the years to lighter components all around but especially trucks... theres also been major advances in urathene technology and many attempts at improving board technoloy/durablity with carbon fibers inserts and what not... these type of advances have dragtically changed the industry allowing skaters to ride wider boards and bigger wheels without all the additional weight that wouldve came along with such a setup back in the 90s.
Growing up in the 90s street skaters rode narrow boards and small wheels. You could actually buy sub 50mm wheels at any skate shop back in the 90s, whereas nowadays companies begin there wheel sizing at 50mm. The common street wheels sizes in the 90s were anywhere between 40-50mm... nowadays people ride anything from 50-56mm for street/park skating. Some companes in the 90s even offered wheels that were sub 40mm.
Wide boards with big wheels existed in the 90s too but were considered a vert setup back in the day. Nowadays essentially everyone runs a 90s vert setup... which makes a lot of sense considering how popular park skating is these days with true street skating becoming more and more obscure among todays youth skaters... which is simply an interesting observation of mine, since theirs obviously a bunch of other reasons why wide boards and bigger wheels have gained so much popularity but imo theirs definitely a correlation between the popularity of park riding and board and wheel size trends going wider and bigger.
@@TysonHook-22- gard dayumn
i've been learning to skate for a year on a board that a friend set up for me using old parts lying around her house. i've just cruising around getting from point a to point b, haven't learned any tricks yet. finally started looking into upgrading some of the gear and upon googling the wheel brand i discovered that i've been riding on roller skate wheels this whole time 😂
Learned anything yet?
@@memelordrafael4091 prob that she was on roller skate wheels
working on skateboards for years eventually helped me working on cars later in life. learning to feel threads and if they strip and how much pressure to apply when tightening stuff and dealing with thigs that get seized also what to look for in degrading rubber bushings compared to mounts, belts, and ball joints on a car.
Gosh !! Seen that first wheel took me back to the early 90's when the technical skate was at the top and the wheels started to manufactured small as 35mm as I remember.. then I took dad's drill, put each one of my 55mm Cockroach wheels and against a sandpaper surface we made it to 40's or 38's jajaa the pressure flips and frontside pressures worked soo great that way
"Every wheel eventually gets flstspots of various degrees" *laughs in formula 4*
skin19head69 Lmaoooo
What?
Yes
I to use Formula Fours ONLY now, and very much appreciated your joke! So true, NO FLAT SPOTS EVER!!!!
I got formula 4, 52mm wheels and have a flat spot thats pretty noticeable. I’ve had them for like 3 months. Not really sure where I went wrong, or maybe just unlucky. I rarely do power slides but skate almost every day.
Oh damn I'll keep that in mind to switch my wheels in a crisscross pattern
You guys have seriously turned into my favorite skate shop, have your stickers plastered on everything! keep up the good work!
I love your channel. So well-spoken and informative. 👍🏻
Thx! It's been like 15yrs give or take a few since I skated. Just jumped back on the board a month ago and it's a breath of fresh air. I got another pair of bearings I wanted to try out and honestly couldn't remember how to get them off. This came right on time.
thank you for making these videos, im not a new skater but all the boards ive gotten until now have been completes and this video and your how to put together a skateboard videos have both been a huge and quick help to putting my new board toghether
Thanks. Tactics, I just got some new reds bearings and I installed them just as you said, and it really helped, they are rolling way better than my old ones😁
man I miss having hella small 90's wheels
when OJs released those dingle berries, I was so happy
They need to re-release those
Que Dableyou check out boardy cakes wheels. They a new company that specializes in tiny wheels
check out SML wheels, they sell 40mm
I love these vids they are so short and Helpful thank you
Man, I love how real these guys keep it. So awesome.
I skate for 5 years now and this is still helpfull
I live in Eugene OR and Tactics is the best shop around. Friendly knowledgeable staff (that actually skate) and great service. I will always go to tactics before shopping online or going to *cough* Zumiez *cough*
I remember when I was kid at the park people used to ride with those old tiny wheels. I feel like it was a style thing cuz I havnt seen anyone with those in forever
Just had an awesome online shopping experience shopping at Tactics. Thanks lads!
Im dumb i always wondered where people got thin wheels😂
💀
I watch this like I haven’t been skating since 1986 lol However I love that you guys take the time and do stuff like this..for New school, Old school or even Middle school skaters! Keep up the love for the lifestyle! Keep up the awesome work! Be safe out there all of y’all guys there at Tactics! My son and I will continue to support you guys! Truly thanks a bunch! You guys make a difference even if you don’t know that you do.
👍🤘✊🤙 🛹 🤗
Thank you for the support! We do it for the love of skateboarding! Take care! 💖
Been skating for 6 years I've still haven't been blessed with a flat spot. Formula 4s is the way to go
Do you do power slides or revert your tricks a lot tho?
Lucky
I've been skating for six months and got my first ever flat spot from a bs 180 a week ago :(
Wt s a fórmula 4?
@@ironninja9873 Formula 4 is Spitfire wheels' name for their proprietary chemical formula of urethane for their top tier skate wheels. Similar to Bones and their STF (Street Tech Formula) wheels. I hope that answered your question. Cheers! - Tim
This guy probably aint even trying or doesnt skate hard. My wheels lasted for YEARS, until i started to revert my tricks or try harder tricks that i couldn't "set straight" before landing, now they last 3 or 4 months before they sound like a motorcycle. Obviously wheels are still fine, but i hate that sound and also they are slower and that really matters when riding transition. For streets dudes, you can probably skate the wheels from 54mm to 49mm without issue.
Great video! I'm a new be to skateboarding and need to change the wheels for my daughter. getting them there bearings out was my issue. Thanks. :)
I love these videos. Keep them coming!
Always order my stuff from tactics, good stuff 👍
This channel helped me learn a lot and is helping me grow my channel!
I loved wheels under 44mm.. but I also loved the oj dingle berries and rocked em for a minute
I remember getting my first board from your location in bend 10/10 shop
I know there are a lot of differences between this and rollerskating, but my partner skates derby and we were wasting SO MUCH money on expensive bearings. After going through $1200 worth of bearings in one year (!!) despite cleaning and lubing them before every meet and practice session, out of desperation I went to the bearing shop I often go to as a truck mechanic and bought some sealed bearings from F.A.G. for $2.50 each. Two years later they're still perfect and we haven't cleaned or lubed them once. $1200/year vs. $20/year simply cannot be beaten. If you're an idiot and the thought of rolling around on that particular brand of bearings is off-putting, then just get the same thing from a different major industrial bearing brand like SKF, Koyo, or Timken.
G thanks now I will show all my friends how good my wheels are and my sick tricks like I said thank to you
1:10 OMG THATS STEENS SKATE PARK! THATS MY LOCAL SKATE PARK!!!!
I skate at steens too 😳
@@MicahGaede yall should do a skate sesh together lol
@@JerseyDevils21 yuppp they should
this is some good information, took me a long time to figure this stuff out.
Nice job on the 100k subs :)
yo, if you are reading this, here is how i got rid of my flat spot on my wheels, i took off all wheels and put one on a screwdriver at a time and held the wheel and the screwdriver around 20 degrees (slanted a little downwards) on a grind wheel until they were all smooth and all the same size and then smoothed them all out with a 1,000 grit sandpaper. so there is my hack i guess.
Thats the flintstones method. Better find someone who works at a shop with a lathe machine and just tell them to shave them until they are even, they will probably shave like 0.5mm off but the finish will be like brand new wheels.
Yo my man! Loved the video - super clean and simple. I've just bought a new board and I noticed some slight wobble with it as well as one wheel stopping slightly before the others. I'd love to see how to do a once over of the board to see that it's running smoothly. Some questions I would love answered are: How long should my wheels spin for? How close together should they stop? How straight should my board roll if I let it free-wheel without standing on it, etc. Cheers, bud!
It's very normal for one or two of the wheels to stop before the others. If they all can freely spin for 10+ seconds then you don't have anything to worry about. It's only really a problem if they stop abruptly after a few seconds. New trucks/bushings can be a bit sticky before they're broken in, so they'll stick in place and make your board auto-turn when you let it roll on its own. Just keep skating them and they'll break in and the auto-turn will fix itself. I hope that helps! - Tim
@@tacticsboardshop Legend. Thank you so much!
that was the most peaceful video of the day. Subscribed!
This actually really informative seeing kids with coned out wheels who have never heard of rotation bums me out that should be a featured video in and of itself if the title had wheel rotation in it I bet a lot of newbs would click it
Appreciate the tips and vice!
I just bought a whole setup off you guys
Enjoi that fresh urethane....love the captions!
Glad someone noticed! 😆💚
1:14 so fuckin smooth
Depending on how big and deep the flat spot is some machine shops with a lathe will machine your wheel down a mm or 2 to get rid of the flat spot and not sacrifice to much urethane
Finally got my first flatspot after 7 months, Yes!!
Gotta love Tim
This video taught me how to remove and apply bearings
1:13 is that the noise of the bearings or is it run down wheels? My board has done it like once or twice but now it never does that. I loooove the noise tho
That's the sound of worn out wheels. Usually the flat spot works itself out after rolling on enough rough pavement. But really bad flat spots are super distracting and annoying. Cheers! - Tim
Can you guys review the new Bones v6 wheel that came out? 👊🏻✨
I found the best way to get rid of flat spots...
She won’t talk to me anymore though.
Oh shit
Dammmnnnn
i don't get it
Thank you for helping me put on y new wheels
flatspots:exist
bones wheels:we dont do that here
true, i had the same wheels for almost 10 years now and still look pretty good, a few cuts here and there but nothing big and it doesnt sound like a motorcycle. When i bought the wheels back then i actually bought 2 sets because i thought they were not going to last more than 2 years.
Haha YES! those are the wheels I was watching this video for, they should arrive tomorrow or on the 3rd of August, i feel complete 💃
I bought a board from Braille about 5 months ago, and the wheels still have the little tread ridges on them, I’ve been riding a lot too mostly on rough pavement. Must be really shredding to get them down to 29mm.
The way I take out bearings is by throwing the wheel on the ground have one come out and push the other one out
I’ve got the same formula four 👌🏻 and have the graphics inside 👌🏻
Should i change? My wheels are 38mm. Great for pressure flips actually.
You don't have to switch you wheels if you like them the way they are. It all comes down to personal preference in the end. But I bet every sidewalk crack is a cataclysmic event! Cheers! 😂- Tim
Tactics Boardshop haha exactly, i couldnt ride properly even in the smoothest area in my neighborhood the smallest rocks could end my whole career.
I remember grinding my wheels down one time as a kid....never did that again haha
I have the exact spitfire formula four wheels the blue ones man their amazing
1:52 would your wheels not be back wards or is that the point to keep them longer
You're right, the wheel graphic would be facing in at that point. It's to keep the wheels from coning, which is when the outer edge of the wheels wear down faster than the inner edge of the wheel. It's usually not a problem if you have center-set wheels though (which most regular skate wheels are.) - Tim
I have had the same set of bones for years. They make the best wheels.
Wife's and formula fours
i looked at the thumbnail and thought to myself ‘are those my wheels?’ lol
I just ordered new wheels from you thanks you ship it really fast and love the wheels btw the wheels I got are OJ wheels 54mm and the durometer 101
Thanks for the Support! 🙌💖 I hope you love those wheels! 🔥
Gripping board is the most satisfying thing ever
Can you do a when and how to change your deck
Is there that powerslide video up on YT somewhere?
Plenty
do you feel like its harder to skate with riser pads? my board is so high off the ground lmao
There's definitely an adjustment period, but you get used to it pretty quick. 👍 - Tim
@@tacticsboardshop thanks
My wheels was 53 mm when i got them, now they are 42mm. Do i need new ones?
No. Remember he said something like it will get smaller by powersliding, cruising ect ect ect.
Wait do you have to take of the plastic thing on your scare board wheels
What plastic thing are you referring to?
@@tacticsboardshop I meant can you take of the Lip on the wheel
@@Ar1Andas-s9e The only parts on the truck axle that are removable are the washers, bearings, bearing spacers, and the wheels themselves of course. As far as the wheels go, they're one solid piece of urethane and the lip isn't removable, so I'm still a little unsure of what you're asking.
@@tacticsboardshop thanks I like your videos
Only suggestion is use a full size gripper wrench on the wheel use a towel on the wheel to pry the bearing. Using your hand is impossible sometimes
whats the best kinf of wheel and the best diameter for transportation, speed, and maybe doing a few tricks every now and then?
Go for some soft wheels that have a slightly smaller diameter (53 - 55mm) like the Ricta Clouds or the OJ Plain Jane Keyframes, or the OJ Mini Super Juice Wheels. 👍 - Tim
What can I use to clean my skateboard bearings
Nice video and keep it up!
Finally someone makes a video about this
i took off one of my wheels and its my first board and just got it i took off the wheel because there was dirt on the bearing and i wanted to clean it and when i put the speed washers,bearings,wheels all back on back together the wheel just would not spin as fast as the other three and I'm sure i did not tighten it to tight because it took the washer and spun it in-between my fingers and it would still spin slow i don't know if i should buy new bearings ?
It's fine if it doesn't spin exactly as fast as the other bearings. As long as it spins freely for a few seconds, you'll be fine. 👍
What about the threads on the axles stripping because of the nut and the axle gets damaged when you land primo
You might have to rethread the axles to get the nut on. We have a truck maintenance topic on our list for videos. We'll try to get it done sometime soon. Cheers! - Tim
@@tacticsboardshop thanks😀👍
i just need to know how to change them. i’m just starting to learn to skate and i ordered softer wheels. i’ve been long boarding for like over 4 months and i’m used to softer wheels.
OMG THAT INTRO SO SATISFYING
Hi I am beginner skater, I use 8. Board. My desk is broked. Should I change desk 7.5 on old 8. Truck ? Thank you
So your 8.0 deck is broken and you want to put a 7.5 deck on some 8.0" trucks? You can if you want to, but those trucks will be a little too big for a 7.5 deck. Maybe you could clarify? - Tim
@@tacticsboardshop thank you . Keep posting videos 😊🙏
Very useful for me
I couldnt believe how dirty my hands were changing out my first wheels 😭
Hay i have a big question but first let me tell you what happened so i was skating and having fun and then my flipping wheel comes off my truck??? and i think i broke my arm lol... but. How did my wheel come off? im really confused.
BROKE YOUR ARM!!!!! Wha!!!?? Is the axle nut or the axle threads that it that fell off of stripped? Can you tighten and loosen the axle nut all the way with your fingers? If you can, then you probably need a new axle nut so it doesn't loosen itself from the vibrations of riding. I hope that fixes your problem, and I hope your arm is all good! Cheers! - Tim
My first wheels were spitfires, im still riding them today with no flat spots. But they are lookin like they at a solid 45mm
Instead of when i got them they used to be 53mm
You swap the wheels in a crisscross shape so I swap the back right with the front left wheels,
and the back left wheels with the front right wheels?
Yep, and don't flip them so that it's the opposite side out, that way the contact patch will wear evenly and you won't get a cone shaped wheel. Cheers! - Tim
@@tacticsboardshop Thanks for the reply.
When you rotate the wheels do you keep them all facing the same way like in the video, or can you put the graphic side in when you rotate?
When we're referring to rotating the wheels, we're not talking about rotating the physical wheel, but more like musical chairs with which axle they go on. Usually when you rotate wheels, you keep them oriented the way that they are, so the outside part of the wheel becomes the inside when you criss-cross the wheels on the axles (thereby switching which way the graphic is facing). But since most skateboard wheels have a center set core, coning usually isn't that big of an issue and you can flip them what ever way you want. Really the whole point it to make you wheels wear evenly. I've noticed that my back wheels wear out faster than my front wheels (probably from powerslides) and when I rotate them, I just always keep the graphic out out of habit. Sorry for rambling, I was having a major brain fart when typing this out! 🤣 I hope that answered your question rather than making it more confusing! - Tim
It's so much easier to keep the wheel in the same spot just flip it . If the graphic is facing out ,turn them inward and vice versa other than some gimmicky wheels most are symmetrical
@@skinnymatt64 That works too! For me, if I don't switch my back wheels to the front at least once, my back wheels get tiny way faster than my front wheels. I'm not sure why, Maybe it's my weight distribution or they way I pivot things... Maybe I do too many mannys?🤔😂 Peace! - Tim
@@tacticsboardshop ive been a huge advocate for rotating wheels. yeah I thought that was kinda odd that your problem was more so the backset wearing out rather than the coning do you do alot of 180 tricks? I know personally I was big on 360 variations, and all my 180 flip trick needed to be caught atleast a foot and half in the are and rotated full with no pivot or I hated it lol , so maybe different styles have a huge impact on the wear of you wheels
@@tacticsboardshop coning is really never an issue if you don't run super wide wheels. The back wheels wear out faster for multiple reasons, slides ofc yes, but also shuv its and tres all wear the back wheels more when you pop. Also 75 % of your weight is on the back truck at most times
I remember when i use to skate, my boards wheels would forever spin (legit like 5 minutes or more non stop & everyone at the skate park wanted to buy my board / steal my board / or try to play skate to win it . my dads white hippie friend who he worked with at a bakery set it up for me i was so happy lmfaoooo i dont skate no more its been years.. i miss dropping in and going down big ass ramps not the basic size ones at the skateparks but aye that phase of my life was cool tho hahahaa...
E I say you should set up a board and go cruising and eventually relearn the flatground tricks . It’ll be the best decision you’ll make .
@@williesctt5 will do man !
For me the holes in the wheels that the bearings are inside of seem to have expanded and the bearing is loose in the wheel and seems to move around, should I get new wheels?
As long as the bearings aren't jiggling around too much or popping out, you should be fine. Just put a speed washer on the axle and tighten the axle nut just enough to secure the bearing, while still letting the bearings spin freely. What kind of wheels are they? - Tim
@@tacticsboardshop Mini Logo wheels A cut 101A, I tightened the axle nuts as you said and its no longer an issue for me.
With spacers, are you suppose to let wheel wiggle, but not be able to slide up n down on the axle?
If you're using bearing spacers, (the one that goes inside the wheel and not the little speed washers that go to the outside of the bearings) you can tighten the axle nut all the way down and the bearing will still spin freely. If you don't use the bearing spacer, then you'll have to give it a tiny bit of slack to spin freely, but you shouldn't be able to see it shift on the axle. The amount of wiggle room should be less than a millimeter. I pretty much never use bearing spacers, and I usually just tighten the nut all the way, then just loosen it by approx. a 1/4 turn. I hope that was clear. Cheers! - Tim
I feel vibrations when I ride my board, how do I fix that?
Do I need new wheels? I have spitfire formula 4 full conical and they where 56mm but now 49mm. I have been riding them for 8 month
It all depends on what you like. If you enjoy skating your 49mm wheels, then just keep skating them. But if the small wheels are making everything too rough and the vibrations are distracting and making everything harder, then you should probably get new wheels. 👍 - Tim
@@tacticsboardshop thanks a lot Tim!
The bearings keep falling out of the bearing seat. It never used to do this, but now it's almost as though the bearing seat stretched out and now the bearings don't fit snugly. Is this bad?
I have the same problem. But I don't know what is causing this.
I am using 60mm wheels can I replace it with 53mm wheel on the same skate board
Yep! You definitely can! 👍
I have 53 millimeter spitfire wheels and reds bearings but for some reason my bearings won’t go in. I’ve tried so many techniques and none of them have worked. Please help me.
What do you mean by beats rings? Are you talking about the bearing spacer or the washers?
@@tacticsboardshop im talking about my bearings they just wont go in my spitfire 53 millimeter wheels
@@mikegt5006 It can be really difficult to get the bearing in sometimes. Does it go in partially but you cant get it in fully? Or does it not even go in at all? Could you try going to a skate shop and have them use their bearing press? The standard 608 skateboard bearing is 22mm in diameter, maybe measure the diameter of the hole in the wheel to see if it's big enough? If the hole is too small, then the wheel is defective and you might have to exchange them. I hope that helps! - Tim
@@tacticsboardshop they will go in partially like you mentioned but...
@@tacticsboardshopI'm thinking about buying a bona skate tool. So should I buy it? It comes with a bearing press
I ordered those spitfire f4 conical full and they got to me in 2 days.
Do i need a spacer? Whats are the up and down sides?
Bearing spacers let you tighten your axle nuts all the way without being pinched, allowing the wheel to spin freely. They're quite important for downhill longboarding where you need everything to be tight and secure, but for regular skateboarding, there isn't really a situation where you would need them. So use them if you want to, but they're optional. Cheers! - Tim
My bearings are spinning (loose) inside my wheels. The bearings are not in tight as a result. Do I need new wheels?
Are the wheels super stretched-out and old? Yeah, there's not much you can do for a wheel if the bearing slot isn't the right size. 😕 I guess if it doesn't really affect your skating and rides fine, you might be able to just skate the wheels anyway, but if they are falling off or cause your bearings to bust at a faster rate then you should probably get new wheels. Stay safe out there! - Tim
@@tacticsboardshop Thanks for the reply. The wheels are 14 years old. I felt it took lots of pushing to get them rolling properly. I've applied speed cream and I'll see how it goes.
@@tacticsboardshop Speed cream did nothing. However, buying new wheels fixed it. Board rides very fast and smooth now. 😎
What wheels do you like the most? Mine are just rubber not urethane
Those wheels in the thumb nail had me scared
When I switch from soft to hard wheels should I buy a whole new trucks and bearings??
You certainly don't have to buy new trucks and bearings when you get new wheels. But if you plan on swapping between frequently then it would be more convenient for each set of wheels to have its own bearings. Cheers! - Tim
@@tacticsboardshop thank you for actually responding
hard wheels or soft wheels is good for rough surface?can you say
Soft wheels will definitely be better for rolling on rougher surfaces. Soft wheels do however make some tricks harder, but you'll roll much more smoothly. 👍 - Tim
Idk if small wheels are still cool but I remember back in like 2010, rocking tiny as wheels like that was the cool thing at skateparks