Most cringe worthy DIY repair project I've ever done! - @Barnacules
Вставка
- Опубліковано 21 лип 2019
- Did you know I've made over 800+ other videos on UA-cam? Hit that SUBSCRIBE button and watch another Barnacules Nerdgasm video right after this one! 🍿 In this episode of #JerryRigged I show you all the wrong ways to fix a broken power button on Logitech Z-5500 THX Surround PC speaker receiver and due to a chain reaction of unfortunate bad decisions a 5 minute simple clever hack turns into a 30 minute documentary of fail ending in possible redemption.
== Links to all products shown in the video ==
Logitech Z5500 THX Surround Setup - amzn.to/2JUs2tP
Logitech Z906 5.1 Surround Speakers - amzn.to/2YkaqAP
Yamaha MG10XU Audio Mixer Board - amzn.to/2Y7Rb9p
iFixit 54 Bit Screw Driver Kit - amzn.to/2SwsUIM
Original Super Glue (12 pk) - amzn.to/2JXuBeI
Insta-Set Super Glue Accelerator - amzn.to/32MiJ7J
Heavy Duty Zip Ties - amzn.to/2Yjl2Qo
Fans Actively Cooling My Amp - • The most useful USB fa...
Sony RX100 M3 (What I shot this video on) - amzn.to/2YkeMYt
Jobi GorillaPod 1K Tripod - amzn.to/2YcMKyn
Puget Systems PC Builder - pugetsystems.com
== Get your OFFICIAL Barnacules Nerdgasm Shirts, Mugs, Stickers ==
shop.barnnerd.com
== Links to all my social media ==
/ barnacules
bit.ly/BarnDiscord
/ barnacules
/ barnacules ($1 a month for 100+ behind the scenes vids)
== Come watch my Morning Coffee LIVE stream on Twitch ==
/ barnacules
== Check out my other #JerryRigged episodes (they went much better) ==
Playlist of all episodes - • Making Custom Fidget S...
Beats by Barnacules Noise Cancelling Headphones - • Making Passive Noise C...
== Frequently Asked Questions ==
Q) Why didn't you just 3D print a new button
A) Come on, I wouldn't even get batteries down stairs for the remote, you think I was going to design and print a new button from scratch? (But maybe later)
Q) Why didn't you unplug it?
A) Truth is I didn't want to climb under the desk because my rib is still hurting like hell from being cracked. That being said it was stupid even though it made the video somewhat more entertaining from a cringe-worthy standpoint.
Q) Why are you so fat?
A) Lots of access to food!
Q) Can you still buy those speakers?
A) Yes, I linked them above however they are like $1500 because they are NOS now because they don't make them anymore. Just get the Logitech G906's which aren't quite as good but the best thing they make now or just get yourself a good stereo receiver and book shelf speakers or studio monitors if you have the space!
Q) Why is this video 30 minutes long?
A) I know UA-cam wants 10 minute videos and this will hurt the viewership but I don't care, it was fun to make this video and I like making fun videos
I hope you enjoy the #DIYGasm #HowTo videos on my channel including #Tutorial of 3D printing, programming, technology, VR and so much more.
UPDATE: It broke after 3 days. I opened it up and used hot glue like I wanted to do the first time and it works like brand new and took 5 minutes total 😉 still hope you enjoyed the video 😎
⭐ Protect your privacy & get 70% off Nord VPN 3 Year + Free Month
- nordvpn.com/barnacules
- Use code 'Barnacules' at checkout - Наука та технологія
I hope you guys enjoyed watching this very long train wreck of a #JerryRigged episode showing just how wrong things can go before they go right. This project should have originally taken like 10 minutes but instead went on for hours because of mistake after mistake. I hope you get a laugh at my continuous attempts to make a simple problem hard as possible and ultimately fix it. If you *ENJOYED THIS VIDEO* please give it a like and consider subscribing for more content like it in the future. Also check out my 760+ other videos that cover anything nerdy.
Join my Patreon for $1 a month at patreon.com/barnacules to get private behind the scenes videos weekly including my personal life and family life which I don't showcase on the public channel since I want to stick to technology, reviews, education and fun on here 🙏
My 5500 still works perfectly as well, best purchase i ever made... my lcd back light is a little dark, but still working, I did replace the fuse for a 30amp one over 10yrs ago, the factory one was shit and died after a couple of yrs.
2:08 love it
You have the best cuts on UA-cam.
Remember when you customized your a.c
What if the screw drivers was down stairs.. The video would be a like half life 3
It was so nice seeing the old Jerry!!! Full of Energy and excitement about working with technology!! Can’t wait for more to come out!!
Full of Energy fueled by those sweet sweet pain killers! lol Seriously tho Jerry, don't get too attached to those things; that's a road you don't want to go down.
Sweet! 4k is finally showing up. UA-cam takes forever to encode these days! Thanks for joining me on the premiere, we had over 1500 concurrent viewers and it was amazing talking with you guys!
buy the remote control i have the same Logitech Z-5500
You could 3D print one now... but that would mean going back in for more punishment ;)
I'd get 3DPrintingNerd to do it. Sorry Jerry, don't want to put you down. Yet.
@@UKSonicBoomBoy Sure, I would do it.
@@3DPrintingNerd Love how you just pop in like that!
Would a 3D printer even be able to make a part like that accurately enough and still get a flexible portion that won't be brittle?
@@Razor2048 Sla or DLP
"I've never tried pulling my knob off before"
-Jerry, 2019
“If the women don't find you handsome, they should at least find you handy.”
― Red Green
Great to see you making videos again. That was entertaining. 😁
Dude I was crying out of laughter when I realized I was only half the way through the video.. Jerry this video is gold!
Wow this video was a roller coaster!! Great vid Barn. :)
TIP: Use baking soda to instantly harden super glue.
Between the ridiculous series of more and more random steps you took and the quick edits, this entire video makes me feel like I finally understand what it feels like to have ADHD.
M Fochs is that a good thing? 😎
@@Barnacules squirrel
Feels a bit manic to me???
On Next Week's Episode: Jerry uses too much paint when painting the Z-5500 button, and it seizes up the button, requiring the application of acetone to free it ... which melts the zip tie superglue.
This was worth the hellacious upload time you went through yesterday, for damn sure. There's tons of value in seeing other people make mistakes and get past them - stuff goes wrong and dealing with that is an important part of real life.
Im so glad you’re back man, love the humor, love the stuff you come up with, great entertainment!
So happy to see more videos from you! Thanks for all your content! :D
This is why i love you. You not the only rigger that mesing up along the way.
Agreed! I wreck stuff I'm trying to fix constantly... seeing other tech guys and gals make the occasional train-wreck makes me feel not so stupid!
@@brainsironically 100% agree, funny how ppl work.
LMAO! I was yelling at my screen, "no, the LED!!"
amps define the size of wires, not volts and low volt caps aint gonna hurt anyone
This video was great! I loved how you just had fun and went with the flow.Your personality just makes me smile and I hope that your rib gets better.
I really missed you Barnacles, love your vids and your attitude keeps me going.
Bro I'm so happy to see u back with this "old fashioned" Barnacles, I súper enjoy this video, keep them coming man!!
This was a great video! one of your best of all time! Keep doing what your doing I have been with you for a couple of years and you just keep getting better!!
Some of your best Vids are when your teaching us something and making us laugh. This is definitely your strongest UA-cam approach. You are so good at this. Keep making those hits.
I think it's called a "Square Bit" - LOL.
It's always funnier when everything goes South.
Thanks Jerry.
That was a nice surprise. Been a while since I got to enjoy a Jerry Rigged video.. missed them.. and damn.. don't know what pain killer you taking , but you were hilarious . I was laughing non stop !! Great video
glad to see you Jerry, love your videos and unique energy. keep it up buddy!
Thanks for the early access, Jerry. -Wolveswithears
Man, it was great seeing another vid from you Barn! This one had me cracking up!
Why, why would you take apart electronics with the power plugged in and on. That is how you get dead electronics.
Yea I was cringing the whole time because he could easily short it
But he still managed to destroy an absolutely amazing sound system.
loved this video, glad you are back!
Great Video Barncules...No drama just good old fashion fun my man.Great stuff!!!Cant wait for the next one!!
When things go sideways, it leaves so much room for funny shenanigans if you're willing to laugh at it.
Loved this Jerryrigged vid! Thank you Mr. Barnacules!
3D printed one in TPU with a contactor part on the back would be a nice follow up.
Missed you bro. I'm very happy to see that you are doing better. Wish nothing but the best for you friend. You got this Jerry kick life in the nuts and rock on!
why dont you use digital audio instead of analog?
Don't ever change xD Going from super glue job to space engineering DIY stuff...love it ;)
Jerry you are the man please keep up these jerry rigged videos I love them!! Laughing the whole time!
Yep, 5 min job with hot glue. Super glue is messy and isn't really good for electronics work.
I have never commented, but I've watched your videos for a long time now. I really enjoyed this video. It is like the good old times. You have such energy on camera and I understand that energy is hard to keep up. Just want to let you know that I love your videos and the stuff you do.
One of the best DIY fixit videos I have seen.
You fix things the same way as me. Spend hours trying to bodge it and then realize I could have saved so much stress by just doing it the right way 😂
Never get tired of Barn vids!!! Keep them coming, Bud!!!!!
awesome entertaining vid. love the jerry version of Jay's fart ending noise. please keep that going
Man your videos make me happy!
Good to see you making more videos. Looking forward to seeing you get back to full speed. I was yelling "sandpaper"at the TV when you were trying to get the glue off of the button, lol.
hi jerry enjoy ya vids keeps a smile on my face thank you for the effort and time you put in
Just Joe you’re welcome!
Ahhh, haven't laughed so hard since your WRX roof repair. Keep up the good work 🤣🤣👍👍👍
Jerry man this is amazing loved it.
Absolutely love this video keep these types of videos coming.
I love Jerry's videos! I always learn something new!!!
Awesome to see you back in action!!
iFixit is still alive. Who would be able to fix tech without their tools?
Next JerryRig: Jerry rig a 3v wall wart to power your remote for this. That way, you don't have to go downstairs and walk all the way across the house to get the batteries. haha
Cracked me up all the way! Thanks Jerry!
for $8.00 you should have gotten epoxy mix..superglue will wear out FAST epoxy mix will last forever
This was very entertaining. Please make some more.
Love your vids, great work
Great acting, great editing, great 'bad' fixing, great fun.
I had great laughs.
This was quite entertaining. I laughed the whole way through.
You are awesome. I laughed so hard at this video. Keep up the great videos. I’ve watched every video you have posted.
I dont think that I've laughed this hard in a long time. Thank you sir for making my day.
The Master is back!! Amazing content. I want to laugh, but I want to concentrate... Brilliant video. Thanks Jerry!!
This video is freaking awesome, dude!
Good to have you back... I died out laughing when you went "Damn it I glued it in place."
I've been rocking the Z-5500 for over a decade and now this happened to my power button as well! Great to have a video on how you should *not* try to fix this lmao
This is like watching a drunk squirrel solving algorithms that explain why a black dress looks more elegant on a giraffe when you drive by your neighbours house faster at night, assuming water flows uphill now and then.
I love your videos. Please make more of these!
Lmao!!! This is the Jerry I remember... love the video. Was in tears laughing so hard. Great video!
I think this is your best Vid in 2 years. Missed you!
Man that was a blast! Good work Jerry
Glad to have you back Jerry!
Love these videos! Thanks for making me laugh
After about 10 minutes I started to wonder how this could turn into a 33 minute repair. The next 23 minutes were well worth it to find the answer. Thank Budhaclese it all worked in the end, because the only emotion more intense than the relief of a working repair is the despair of having to take it apart again
This is one funny video, please keep up the great work!!! Love it.
Thanks, you make me feel soooo good about myself.
I have the same Logitech speakers and the power button on it did the same thing yours did. I've been using the remote now for about a year (luckily, mine has batteries...whew!). Thanks for showing me how much glue is too much glue. I think I'll stick with the remote...at least until the batteries fail. Great video!
Glad to see good ol' Barnacules back and rockin'
good job jerry keep up the good work,love to see more vids.
JerryRigged - The "Official" sponsor of the Original Super Glue! I am really happy to see you back and making some videos!
Jerry watching your UA-cam vids are like eating freshly backed chocolate chip cookies with cold milk. We LOVE you brother.
I love your videos. You crack me up!
A for effort, great to see you making videos man :)
I'm liking this,good stuff Jerry
Jerry you are so adorable and charismatic, I am learning to be like your ball of energy. Thank you so much for being on UA-cam
Man, I have really missed watching your videos!
so damn happy you are back
15:24 Bend? You broke it. That has no structural integrity left whatsoever
LOL this is entertaining, but i am also laughing at the fact where this can be done by grabbing the batteries. Keep up the good work man!
SICK VIDEO!
ive been crazy with crazy glue so many times.
Hopefully you JerryRIG some other UA-camrs stuff someday. Love to see that.
There is always that one guy who patches stuff horribly. Maybe a JerryRigged option will be best lol
My button broke, so I looked for a video that showed me how to fix it. I didn't find that, but still liked it
Best video ever , loved every second and laughed a lot , thanks so much , just start doing videos again please
Dang Barn you are having my kind of day when tinkering lol
This video made me chuckle...FFS Jerry, you need to keep on making videos, because this is entertaining 😀
So, the heart is still bumping?
Good to see you uploading again!
Jerry is BACK and crazier than ever !!!!!!!!
Man I have missed your videos! More please
Great walk true video big boned man... fixed my knob or button with this! its so awesome... But just a tip, i used clear zip ties and now the light is shining evenly.
6:05 LOL KAJIGGER!?!?!? 😂😂😂😂😂 That's why I love you MAAAAAN! All them crazy words you be coming up with 🤗
I still have my Logitech Z5500s, too.
Dude, they sell for like $1600 on Amazon now for a new in box set since they don't make them anymore. They are way better than the G906 but that's the best they got right now for consumer stuff.
PCs can come and go, but the Z5500s are forever.
Same here still using it since 2005 and the only thing i had to replace was a fuse. but the paint from the power button is kinda gone so i have pretty much a led button to push.
My led display backlight has gone really dark on mine. I might have to pry it open and see if there’s anything that can be fixed.
I still have mine as well... Absolutely love them.. got a hell of a deal 5 years ago for a NIB set for $250.
Watching this video was the best use of thirty three minutes of my evening!
1:33 this is why I love your channel. Golden explanation. Makes total sense 👌👌👌👌👌