1kzte power build fitting the ct12 high flow turbo episode 7.

Поділитися
Вставка
  • Опубліковано 5 вер 2024
  • I fit up the ct12 high flow turbo get the hot side all set up and ready for the pump install and it wont be long guys we will be doing some pulls cheers 😁😁

КОМЕНТАРІ • 45

  • @ReinventingTheSteve
    @ReinventingTheSteve 3 роки тому +2

    I can't wait to see the power results after this... you're doin some great mods!

    • @TRAV30387
      @TRAV30387  3 роки тому +1

      Me either matw its going to be awesome

  • @antoniospsyris1975
    @antoniospsyris1975 3 роки тому +2

    Awesome video mate. Keep up the great work.
    Took me a fair bit to put the turbo on mine when I replaced the cylinder head. That bottom oil return line was a c##t haha

    • @TRAV30387
      @TRAV30387  3 роки тому +1

      Cheers mate yer i had a similar issue was a tight fit hahah

    • @antoniospsyris1975
      @antoniospsyris1975 3 роки тому

      @@TRAV30387 turbo looks mint tho

  • @ChangeOfHearts39
    @ChangeOfHearts39 2 роки тому +1

    steers mate

  • @lionelkiernan6801
    @lionelkiernan6801 3 місяці тому +1

    Hey mate, are you in VIC? How much $ for you to install my PDP exhaust? Nightmare to take off at the turbo.

    • @TRAV30387
      @TRAV30387  Місяць тому

      Ahh sorry mate I'm not local

  • @ChangeOfHearts39
    @ChangeOfHearts39 2 роки тому +1

    cheers make

  • @apihealey5861
    @apihealey5861 3 місяці тому +1

    Hey man if I just put the high flow in without anything else will it work

    • @TRAV30387
      @TRAV30387  3 місяці тому

      It will mate will work better than standard

  • @jr6874
    @jr6874 2 роки тому +1

    Best head handing more boost

    • @TRAV30387
      @TRAV30387  2 роки тому +1

      There all the same mate comes down to keeping them cool

    • @josephkelly4893
      @josephkelly4893 8 місяців тому

      Yeah, the $690 Aussie dollar ones on EBay are actually ok, 1kz is a great old engine

  • @jack__1795
    @jack__1795 3 роки тому +1

    My 1kz is capped at a certain psi if I put a mechanical pump in it that should make it possible to increase the psi right? Im seriously confused as to were to start making my 1kz more powerful

    • @TRAV30387
      @TRAV30387  3 роки тому

      You can wind up boost now if you like i ran mine at 18psi with an electronic pump with some modifications ive got videos to explain that and yes when you mechanical pump it u can go much more because you get more fuel in

    • @jack__1795
      @jack__1795 3 роки тому +1

      @@TRAV30387 would I have to get a manual boost control? Thanks for the response aswell mate 👍

    • @TRAV30387
      @TRAV30387  3 роки тому

      @@jack__1795 yeah mate a boost tee and a gauge for starters and no worries 🤙🤙

  • @finnmcilroymcneill744
    @finnmcilroymcneill744 3 роки тому +1

    I found the turbo you bought. What one did you get: billet, stage 1, or stage 2 ?

    • @TRAV30387
      @TRAV30387  3 роки тому +1

      Billet ct12 mate stage 1

    • @finnmcilroymcneill744
      @finnmcilroymcneill744 3 роки тому +1

      @@TRAV30387 sweet cheers bro, love the hilux bty

    • @TRAV30387
      @TRAV30387  3 роки тому

      @@finnmcilroymcneill744 cheers mate

  • @moonesamymayeven4576
    @moonesamymayeven4576 Рік тому +1

    What gearbox you are using?

    • @TRAV30387
      @TRAV30387  Рік тому

      Standard sr5 box stronger than an sr

  • @roosthrower
    @roosthrower 3 роки тому +1

    My mate has a 200o hilux ute standard.
    Has no power what so ever.
    Goin to check the waste gate hose to see if it's split or cracked.
    Any ideas a 2.8L hilux is more powerful

    • @TRAV30387
      @TRAV30387  3 роки тому +1

      Strange might not b boosting at all or gould b in limp mode the boost pressure sensor might be stufed

    • @roosthrower
      @roosthrower 3 роки тому

      @@TRAV30387 there's no lights on dash at all.

    • @roosthrower
      @roosthrower 3 роки тому

      Is that the map sensor u mean

    • @TRAV30387
      @TRAV30387  3 роки тому +1

      @@roosthrower boost pressure sensor i believe

    • @roosthrower
      @roosthrower 3 роки тому

      @@TRAV30387 ok will have a look, where is the sensor located do you know.

  • @lexiaontube
    @lexiaontube Рік тому +1

    Where's the turbo from ?

  • @AaronStoneVLOGS
    @AaronStoneVLOGS 3 роки тому +1

    yoooo i need some help. I have a 1995 Toyota Hiace (RHD) but im here in America. I want to put this motor in that van. There is essentially ZERO info here about doing that. Is there anything you can point to me to?

    • @TRAV30387
      @TRAV30387  3 роки тому

      Hmm mate not sure it would deffs b a coustom job have a yarn with some fabrication places or performance shops to help with the build sorry bro

    • @AaronStoneVLOGS
      @AaronStoneVLOGS 3 роки тому +1

      @@TRAV30387 ahhh so nobody is really doing this I guess. Time to make a UA-cam video as i figure it out 😜 thanks for the reply!

    • @TRAV30387
      @TRAV30387  3 роки тому

      @@AaronStoneVLOGS ahahah yer man for sure..... no drama mate..👌👌👌

  • @jadenchalmers7102
    @jadenchalmers7102 3 роки тому +1

    What brand of turbo mate?

    • @TRAV30387
      @TRAV30387  3 роки тому

      Genuine ct12 Toyota thats been high flowed

    • @ReinventingTheSteve
      @ReinventingTheSteve 3 роки тому

      @@TRAV30387 how much does it cost (roughly) to get a turbo high-flowed?

    • @TRAV30387
      @TRAV30387  3 роки тому

      @@ReinventingTheSteve the high flow turbo is around the $1250 $1300