Це відео не доступне.
Перепрошуємо.
How To Replace A Shifter/Gear Shift Leaver On A Motorcycle
Вставка
- Опубліковано 25 лип 2020
- In this video: you will learn how to replace a shifter or gear shift leaver on a motorcycle (Suzuki sv650s) very simple task that doesn’t take long to complete. I hope you enjoy it.
#motorcycle #motorbike #suzukisv650
If you're watching this I'm sorry that you went down. It really does suck. But I'm glad that you're in good enough shape that you're looking to fix your bike back up.
Appreciate it👍, kinda went sliding at 120 mph on my r6 somehow the frame sliders saved my whole bike and gear saved me. But that lever is completely bend!
Thanks mate, nice perspective. I fell with my bike doing 0kmph .
Thanks foo
Thank you.
@@flemingmacklain2996I lowsided my 2024 zx6r and it broke the gear shifter
Came here for the c-shaped stopper. Mine blew off while riding. Thanks for showing me what it looks like
Had my 05 sv650 come off while on the road, coasted home in first to find your video. Thanks
thank you so much. Looking to buy one and saw this piece needed to be replaced so I’m going to haggle the person down some for a simple job.
extremely helpful thank you. i just bought my first gxsr1000 yesterday and i needed to learn how to replace this. again thank you!
Just changed mine on my Suzuki SV650. Looks like the exact same shifter as mine. Smooth sailing . But that goofy ring is hard as hell to take off‼️ I never knew it was that easy to replace the shifter coming from someone who goes to my older brother for Biker advice . Thanks‼️
Thank you so much! I don't have a Suzuki but I do have a Kawasaki and this video Definitely saved me from having to hire a mechanic!
Thank you , i Just break mine Yesterday night
hey I need some advice, I as of tonight followed the steps of this video and changed the gear lever of a 2016 ninja 300 and before I did the bike couldn't find neutral but i could shift to 1st and onwards. (the bike had a stationary drop and that was why the gear lever was being replaced. after replacing the part the bike can only find 1st gear and neutral. what have I done wrong?
Hi, try to adjust the pin that is screwed from both sides. Keep adjusting back and forth until you find the right point
Hey. Do you know if the middle
Rod needs to be adjusted to a certain point? I tightened it all the way in and my bike only goes into first gear. No other gear. Should I loosen the rod just enough for it to hold as you said? Is that my issue? Thanks
Yes, you need to keep adjusting from both ends and try to shift gears until its in the correct position. It has to be balanced between both sides to shift correctly.
@@arabmotorcycle8633 Thanks. It worked.
Link to the replacement gear lever! Thanks for the video!
www.motorcyclespareparts.eu/en/suzuki-parts/motorcycles?gclid=Cj0KCQjw-af6BRC5ARIsAALPIlXfzoIc5MY9r0WFQ1Cy-FtaqT0RPSB9cuDbyeiONb6Aii4vaSewgRsaAhaAEALw_wcB
Hi mate you know those black rubber things on the shifter are the ment to move as mine has loads of play and doesn’t down shift very well
Hi, No it shouldn’t mate. The original part is fixed and it doesn’t move at all and the new one i put on it moves inward towards the foot peg. It has a hard spring that moves only if you place a strong pressure on it, otherwise it doesn’t move
Thank you bro I didn’t have the tool for the snap ring so I had to use wrench to get it back on
Do you have any idea what size the washer and snap ring are? Mine busted when I low sided, and the lever snapped + those piece went with it. Couldn't find them.
I have the 1st gen. The shifter and peg are connected. I’m noticing that the shifter sits lower than the original, I’ve tried to adjust it but I bent the rod.
I cannot remove the gear shifter connector. It is sitting too tight on the gear shaft grooves. What to do?
Where did you get this from? I need one
Hello tha ks for your video. I recently purchased the part but it didn't fit. Which model is your sv 650? Thank you so much!
Sv650s why it didn’t fit? Is the thread going the wrong way?
The first one I bought didn’t fit as it was for the SV1000 but the seller posted it as sc650. The threads were opposite so I couldn’t screw it in
@@arabmotorcycle8633 couldn't you have just turned the metal rod around
@@jamieborland2179 no as it is opposite thread on each end
You can go on Suzuki part house and they will have oem replacement parts for every Suzuki ever made, thank me later
Good vid thanks bud
🔥
Can u please twll me where did u buy the replacement part. Thank you. Im struggling to find one
You can go on Suzuki part house and they will have oem replacement parts for every Suzuki ever made, thank me later
مشكور اخوي
is this 1 up 6 down?
Where did you buy a new one
I welded a new end on mine, have a look in my channel. Very interesting. Its still going strong! Handy having a tig welder on standby..
How do I take off the C stopper!?!?
where did you purchase the frame sliders and lower fairings?
Seanman 14414 try this website as I buy all original parts from them. www.motorcyclespareparts.eu/en/suzuki-parts/motorcycles?gclid=Cj0KCQjw-af6BRC5ARIsAALPIlXfzoIc5MY9r0WFQ1Cy-FtaqT0RPSB9cuDbyeiONb6Aii4vaSewgRsaAhaAEALw_wcB
Seanman 14414 they called MSP motorcycle spare parts. They operate in Europe but deliver worldwide. They do fairings and all original parts
what is this type of shifter called?
I just searched for gear lever/ shifter and this came as an option
The part at the end that’s connected to the engine is what broke for me idk what the fuck to do
did you fix it?
1 have a stretched z×10r 2005, I was out back riding with buddies and we came along an unexpected sharp turn with no caution signs indicating to us. And we all overshot the turn.
But since my bike is stretched things were different, I landed in the left lane (no cars nearby) but there was a construction sign hanging off the side of the road of the left lane and my foot connected with it tearing my top foot muscles meaning I can't shift at them moment, my left foot peg was ripped off and my shifter is bent. Still works but I gotta replace it