Ford key programming PART 1 - FORScan
Вставка
- Опубліковано 26 сер 2024
- FORScan with the OBDLink EX cable, progrmming a new transponder key to a Ford Transit Connect van firstly checking the orginal key on the keydiy KD-X2 then using the key programmer in FORScan to make a replacement. Will the key programming work? There will be a part 2!!! watch until the end to find out why?????
4d63 transponder chip programming
Key programming part 2
• FORScan BCM central lo...
Subscribe and get more great videos weekly
/ @rmautodiag
OBDLink EX cable
amzn.to/3adoPlE
forscan.org/ho...
Picoscope 2 channel scope
amzn.to/2C8MeYt
Picoscope 4 channel scope
amzn.to/3gvFWRB
Uni-T multimeter
amzn.to/3bSDT7J
rmautodiag.com
home
/ rmautodiag
Disclaimer:
Due to factors beyond the control of RMAutodiag, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. RMAutodiag assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. RMAutodiag recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RMAutodiag, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
As an Amazon associate, i earn from qualifying purchaces.
Thank you, very useful video, I bought a key with a wrong chip inside, after hours of trying ignition when I watched your video I checked the transponder and it was a wrong transponder inside the key, after changed the transponder with a good one the ignition work instantly, thank you a lot for your video part 1 and 2 🙏
I was trying to program a key on a 2014 Lincoln MKZ and there's nothing in the skin tool for immobilizer the scan tool is the Snap-on tablet newest one they have was like $14,000 and it can't program a key
got my obd elm27 today 18/5/22 but engine not reading obd it comes up no ELM FOUND the wi -fi is ok need help
Would something like this work if I only have 1 ford key and its not an admin key (this MyKEy also has restrictions with driving speed, speaker vol etc)? I want to program another key I bought online, and also remove alll restrictions of the working key. Is that possible through FORScan?
The new key in your video was not yet cut, how is it possible to turn the ingnition on with that key? Thanks!!
I have 2 cards for mazda cx 9 from 2008. I have a problem with keyless go. Once it works fine and in a moment I have to start the car with a metal key. The key flashes red while driving. Not when the immo is flashing and I can't start the car. I suspect that it is the keyless module or the fault of one of the antennas. Can I use a forscan to reprogram my cards? Is it safe?
Can I use Bluetooth elm327 for this?
What was that thing at the beginning that scaned the key and told him it was a 4d63 chip?
It's a key DIY KD-X2
Does all of ford's cars need the 4d63 chip when programming a key or does it need a specific chip to work? Mine's a 2008 ford focus tdci. I just need to make sure before i go buy keys
Should be an Id63 at that age. But the best way to tell is to have the old key read via a key programming tool
Is it possible to use Forscan to reprogram old ford keys to work with another car?
For instance I have a Ford Transit Connect and I only have one key, but I have 2 old ford mondeo keys that looks identical.
Can I reprogram my mondeo keys to work with my transit?
If they are the same transponder. Older are ID60 newer are ID63.
@@rmautodiag huge thanks! Is there a way to determine what transponder I have in my spares? My Connect is a 2012 and I have seen others have ID63 transponders in their Connects. So I'd assume mine have ID63 as well?
2012 should be ID63. I think the change over was 2007 from ID60.
Do you have video with successful process? I have 2 working key for Ford Fiesta mk5 2007. Bought 2 more from Aliexpress and 4D63 40 bit chip (and 80 bit). When I turn on first 2 keys (working) then not-working, led lamp blinks fast like chip is not recognised. I think of buying OBD2 for Forscan, dunno which to buy
how do you get the outcode when using forscan key programming
Great to see, shows not everything goes to plan every time.
Yep that's cars! Will get it done on the next forscan video👍
IT IS POSSIBLE TO WRITE VIN NUMBER ON A PCM
can this do a 2011 keyless ford cmax ?
Thanks for the video, has part two been released yet?
No not yet it will be in the next couple of weeks👍
@@rmautodiag Just about to try this on my ford fiesta, did using the wrong key stop the other keys from working?
No it didn't the van still ran fine. Don't erase any keys!
video to be released on 25/08/2020 at 07:30 PM
Can’t find part 2. Is it up still?
👍
Thanks for the comment
deleted all keys now when pressing clutch in my 2010 ford focus nothing need help
it said key position 0 but you turned it to position 1
My forscan no has pats.
New models are not supported
U can only have 2 keys on the IMO...