. . . Most stuff may be washed with pine spray cleaner, then scrubbed and mercifully rinsed out & dried out in the oven at 125 degrees Fahrenheit . . . 🎉 ❤
This easily has to be one of your best PC restorations my friend. It turned out amazing, in spite of the abuse it had suffered. Keep up the amazing work.
Hey Corey watching you deep clean this PC is truely theraputic and love watchig your vids. This has to be one of the best PC cleanup vids ive seen on UA-cam. Great work sir. If there were no motherboard standoffs, how did the rear IO match the cutout in the case?
Honestly no idea haha, but i would imagine that the back of the motherboard was sitting on the case and that shorted it out which is why we had a dead motherboard
I hate cleaning out my PC, because I don't know or am afraid to take any of the parts off, lol. SO I do my best, but mine has never looked that bad. I need to get better at doing the cleaning stuff though, because yours turned out so well and mine looks clean but there is still dust I can't get to.
Yeah it can be abit scarey but hopefully by watching a couple of youtube building tutorials you will know how to put it back together. You can even use abit of tape to lable the cables to help you out qbit
@@d4nith3 two words won't change the fact. * tell me not being able to afford decent hardware without telling me to not being able to afford decent hardware * Lol Go check some benchmarks, especially on the 1 percent lows
Since the power button cables were broken and needed to be re-soldered, I wonder if the original motherboard was actually fine and just never got signals to power on?
The last owner bolted the mobo to the case. Might have buggered the board doing that. Might try setting up and testing the board outside the case before discarding it.
When you have these systems and write off the board as dead, do you ever swap out the onboard battery to rule it out, or just easier to move on from it?
Quicker way to clean that motherboard, just remove the CMOS battery and shove it in the dishwasher. Obviously requires longer drying time, but will leave it sparkling clean.
I don't believe that I saw you reseat the CPU. That would have been an easy troubleshooting technique to show that the motherboard is bricked. You didn't look at the socket either to see if there were any bent pins either. Just some thoughts.
the pc tower was placed on the floor with carpeting -> dead human skin cells along with all that smoking and cooking grease lead to caking on the intake dust panel/grill.
ADVICE NEEDED- PC wont boot into windows it powers on but can not seem to get into windows, I've tried reinstalling windows using the media creation tool and selecting it as the boot option in the bios but still nothing. please someone help
I used isoprophel alcohol, im not using an ultrasonic because then you guys dont get to see the process of cleaning, its hidden in the cleaner so what would i film?
Oh my goodness where did you get that. I really think it's one I built and sold on eBay forever ago. The mismatched ram gave it away. That's the case mobo gcard everything. I think I got some components on Newegg and put the rest together with what I had. But it could just be common parts still funny though
When I saw no standoffs I was like "gee I'm surprised the motherboard survived"... well it didn't haha. Probably like $1 worth of standoffs is the cause for the dead motherboard or at least logic dictates that. Hopefully any future new builders that see this video have this in mind. Btw I noticed that only the matching RAM was used. What's up with the other 2 modules. Busted? Would've been nice to know that.
Get UPDF with Limited Offer: bit.ly/3Tph43m
When you said the guy had the motherboard screwed directly to the case, without the special screws, I knew it was dead.
That 850w power supply is worth more then the all components 😅
. . . Most stuff may be washed with pine spray cleaner, then scrubbed and mercifully rinsed out & dried out in the oven at 125 degrees Fahrenheit . . . 🎉 ❤
i was about to comment that to
why would he not just use another 450 wat psu
This easily has to be one of your best PC restorations my friend. It turned out amazing, in spite of the abuse it had suffered. Keep up the amazing work.
Thanks!
wow the acrylic fan 14:45 is so nostalgia, you can see the texture when the light shines on it and its so beautiful
That 850 PSU can drive 3 of those bangers.
Haha it sure can
7 np that whole rig draws 100w lol
no standoffs?! .. few of my customers did the same thing .. all their boards fried! they thought of assembling their own pc ..
Instant short to the mobo by screwing it directly to the case
exactly .. so this board in the video must be fried .. so sad ..
🙂 thats why nowadays most pc's come preinstalled with standoffs because of normies
oic, but so far in Singapore I did not come across any. actually that would be nice, one less job for me. :P
Yeah unfortunately i believe this is why the mobo died
Love seeing these video of buying cheap broke pc and bringing them back to life, keep it up
Thanks, will do!
Dude your smile is super infectious, I love it! Keep it up man. Definitely got my sub
Hey Corey watching you deep clean this PC is truely theraputic and love watchig your vids. This has to be one of the best PC cleanup vids ive seen on UA-cam. Great work sir.
If there were no motherboard standoffs, how did the rear IO match the cutout in the case?
Honestly no idea haha, but i would imagine that the back of the motherboard was sitting on the case and that shorted it out which is why we had a dead motherboard
I don't get why people who sell their PCs online don't bother to clean it.
because they arrre arrabs or crackheads
Cant be bothered i guess
The lack of cleaning is an indication of laziness. They for sure when clean it when it comes to selling
Dude, he doesnt get his PCs on marketplace. This channel is fake. Not once does he even show that he gets the PC from marketplace.
Keep being delusional then lol @@randymitchem6462
Brush for painting walls, smaller size- that's easier to use and is flexible but gentle to penetrate every gap
Man that is dirty, but the pc turned out good. Great job
Thank you!
Jesus Christ mate when you said pdf files at the beginning of the sponsored segment I legitimately thought you said pedophiles
i love this type of content, keep it up!
Was there something with the mismatched RAM as the end result was with just only the 2x4GB kit?
Yeah unfortunately those sticks were dead
I hope he replaced his toothbrush 😂
20:00
What is the song playing during this part?
It reminds me of the 80s movies I used to enjoy watching.
Cool concept bring back old pc to life and not ganna lie the Cat BG is intersting
Hahaha wallpaper engine on steam, think its called cool cat
I hate cleaning out my PC, because I don't know or am afraid to take any of the parts off, lol. SO I do my best, but mine has never looked that bad. I need to get better at doing the cleaning stuff though, because yours turned out so well and mine looks clean but there is still dust I can't get to.
Yeah it can be abit scarey but hopefully by watching a couple of youtube building tutorials you will know how to put it back together.
You can even use abit of tape to lable the cables to help you out qbit
Doing something is always better then doing nothing !
13:58 u could use some metal polish non abrasive to clean that copper.
Great idea!
. . . For $50 US expectations are minimal . . . 😂
Impressive video!👍🏻👍🏻
Thanks a lot!
Good Job, nice work well done. I enjoyed this video.
Need more of these video series it's amazing
you making me wanna clean
imma just put on your videos and just clean my gaming area like crazy
Bolting the mobo straight into the case without standoffs likely caused it to short out at some point.
Dude you got more balls than me. No way I’d even test that disgusting power supply!! I ain’t cleanin’ out no roaches. lol. Awesome video.
I5 4460 is not that bad at all. U can pair it with an RTX3060TI, 2x16GB 2133MHz ram, 2TB sata 3 ssd, 650W seasonic psu and its good to flip it.
Yeah its a decent little cpu
No. The CPU Would bottleneck the gpu, the motherboards pci express has not enough lanes. The microstuttering would be all over the place
@@ValentinaDiNapoli-bh7ds not really.
@@d4nith3 two words won't change the fact. * tell me not being able to afford decent hardware without telling me to not being able to afford decent hardware * Lol
Go check some benchmarks, especially on the 1 percent lows
@@ValentinaDiNapoli-bh7ds it has enough lanes x16 pci express.
why you dont paint Powersuply black so it match the chassi ?
The jump scare sponsor add placement @ 2:00 got me bad😞
Since the power button cables were broken and needed to be re-soldered, I wonder if the original motherboard was actually fine and just never got signals to power on?
No i was jumping the mobo manually
The last owner bolted the mobo to the case. Might have buggered the board doing that. Might try setting up and testing the board outside the case before discarding it.
bro that powersupply its just overkill for that pc bro, worths tripple than the pc
Great video, nice job
Thanks!
nice work mate love the vids
Much appreciated
When you have these systems and write off the board as dead, do you ever swap out the onboard battery to rule it out, or just easier to move on from it?
Always test that
Honestly 90% of the time Ive got stuff used, it only needed to be air-blasted to get rid of the dust.
Hi where did the cute cat wallpaper from please? xxx
Wallpaper engine on steam, its called cool cat
@@DesignsByIFR brilliant thank you xx
Now I am motivated to clean my PC!
Quicker way to clean that motherboard, just remove the CMOS battery and shove it in the dishwasher. Obviously requires longer drying time, but will leave it sparkling clean.
😶
I would never bring cockroaches in my home, because if there was even 1 alive, you are now invested.
what % of isopropyl alcohol do you use?
anything above 70% should be fine but i personally use 90% or higher
95%
thanks!@@DesignsByIFR
Nampak macam baru. Terbaik!!!
what are you dipping your toothbrush in to clean the motherboard and fan???
I use isoprophel alcohol
You should do another one. These are fun I love your videos.
More to come!
The 200 gb was for the os I like to have separate storage. I could still be wrong though
I don't believe that I saw you reseat the CPU. That would have been an easy troubleshooting technique to show that the motherboard is bricked. You didn't look at the socket either to see if there were any bent pins either. Just some thoughts.
Yeah i did all of that, i even tried other cpus =)
The RM850x in this system is WILD.
Wow, that system was absolutely feral.
the pc tower was placed on the floor with carpeting -> dead human skin cells along with all that smoking and cooking grease lead to caking on the intake dust panel/grill.
watching pc build ✖❎
watching cat live wallpaper✅☑
So with all that hard work and the new parts added, what are you gonna sell the 10 year old, not W11 compatible, PC for?
Straight to the bin with that power supply for me, props for trying it out though😅
Ooh, dust creeped onto the cpu from the slightly lifted cooler.
love you bro
♡♡
ADVICE NEEDED- PC wont boot into windows it powers on but can not seem to get into windows, I've tried reinstalling windows using the media creation tool and selecting it as the boot option in the bios but still nothing. please someone help
Pretty basic tip but nontheless: Display CPU and GPU usage while showing benchmarks.
Satisfying clean but that power supply totals that computer 2 times over, haha!
Haha it sure does!
That antec psu keep going, had same experience with These
Little gem it is
For how much would u sell that ?
And I guess you never heard about ultrasonic baths and isopropyl alcohol
I used isoprophel alcohol, im not using an ultrasonic because then you guys dont get to see the process of cleaning, its hidden in the cleaner so what would i film?
How did you lock the standoffs to the case bro?
You just screw them in
I wonder how long these HD have been on. Maybe check it with Crystal to know? I bet it's about 1000 days or more
how did you know if it was broken or not if you never tried it before proceeding to clean it ?
The mobo is dead
Usually, it's a REALLY GOOD IDEA to check the components before assembly.
Just saying.
And,why not to utilise ALL the ram??
its mis matched
The ram is a mis match
200GByte OS. Shorter seek distances overall. Good for OS install. 1 TB Good for Storage.
Need help for my pc how to clean it well
straight from the landfill
Fantastic 👌
Thanks!
I had that Case from Cooler Master, AMAZING CASE!!!
brushing the motherboard bricked it?
why did you go to all the trouble of cleaning the PSU up for, without even testing to see if it works first ?
Why not?
Loads of room in that case for some water cooling! 😁
Indeed!!
Remember them two holes at the top??
That was the clue,that this case came "water cooling ready".
There sure is
-Screwed in motherboard to the case WITH NO STANDOFFS-
Dead motherboard... yeah that makes sense
I always clean those dirty pcs with compressed air on my gas station nefore letting those come into my house. You can get serious trouble there.
The motherboard was mounted directly to the case, why would you even test it?
Incase it works? What do you mean
Oh my goodness where did you get that. I really think it's one I built and sold on eBay forever ago. The mismatched ram gave it away. That's the case mobo gcard everything. I think I got some components on Newegg and put the rest together with what I had. But it could just be common parts still funny though
Emagine the previous owner watches this video 😂😂😅
Should maybe test single components first before pluggin em all in.
Cleaned or not.
Yeah i didnt really want to reveal if it was working or not until the end
@@DesignsByIFR Need to buy me psu tester.
Tinkerin old computers is fun, even just for yourself.
It's oily | 99x
It's greasy |99x
It's grunking |99x
It's disgusting 99x
It's stinky 99x
4th gen i5,i7 ,DDR3 mem ,PCI 3 , you really gotta give up on something this slow
Idk what disturbs me more, the ramdom ass memory sticks, or the dancing sunglasses cat in the background.
500W is enough for this machine
Like the Corsair’s PSU style.
♡♡
Can we just appreciate how he’s a stranger things lover 👇
Hahaha ♡
Old computers can be used as dust collectours.
Or door stops!
@@DesignsByIFR Hamster cage would already be cruel. xD
"Brand new Seagate barracuda, so its going to be nice and reliable." :'D
Hahaha i see what you did there 🤣
I used to have the AMD version of that motherboard.
yikes dont know why you opened the power supply inside. yuk
Yeah it was bad haha
Swap the old cr2032 and the motherboard will work again
Ill give it a shot!
Sticky to the touch is something my dt teacher would say
Lol
what the hell only ₹49
When I saw no standoffs I was like "gee I'm surprised the motherboard survived"... well it didn't haha.
Probably like $1 worth of standoffs is the cause for the dead motherboard or at least logic dictates that. Hopefully any future new builders that see this video have this in mind.
Btw I noticed that only the matching RAM was used. What's up with the other 2 modules. Busted? Would've been nice to know that.
Yeah sorry i did forget to add that in but they were dead
Excelenttttttt men!!!!💪💪💪💪💯💯💯
Thanks!
No Corey those gloves won't protect you, well at least not from the charge stored in the capacitors 😅😂
Hahaha
the dust on that cpu 😮
I really am worried how you get cockroaches in your house and pc. Glad to have never seen that. They must be very dirty people to sell the pc.
Screwed right to the case? Mobo probably finally shorted out.
D.O.A
ITS OILY STINKY GREESY AND IT SMELLS this pc had this line the most out of all the prev vids.
Hahaha =D
dude shorted his MB by screwing it to the case.