Can the in command center be reset from the master control box in the basement? Our screen is lit but no display of options. Of course the slides are out but no awnings are out. We car in Colorado and start jobs on Wednesday next week. Can't bring it back to Indiana.
Is there a way to DIM the ceiling lights in our '21 Keystone Cougar 29RKS with the In-Command System? I saw elsewhere online that ASA has developed a lighting dimmer module for the In-Command System but I was unable to find a source for the module and/or how it would be wired into the In-Command System.
My rear A/C show an inside temp -F and will not run heat / cooling or just fan. I have already tried removing all power from unit to reset and didn’t work as it did in the past. I have read to make sure my unit has the EOL resister located in the roof cavity must unsure where to find that? Any help would be great.
We have a keystone cougar 2022 29rli. Our unit does restart often as well as we try to press a button and it freezes and needs to be reset. Is this a problem with the unit or how do we test it to stop doing a reset or freeze?
how is it for speed and responsiveness - ive had a couple units with the LCI system - its subpar - would prefer a regular control panel with switches etc.
I will have it always connected to Bluetooth and Wi-Fi here at home or at the campgrounds or internet connection with Winegard connect antenna we have. What would be nice is if the lights on a timer feature could be added someday. Here at home, we use Feit electric app connect to our outside lights with the special light bulbs. Works great but with this function on my phone with iN_-command when we are out at dinner, I can at least turn on the awning lights before we get back to the RV which will be nice.
Troubleshooting my incommand now on 2020 Fuzion 369. Wall control panel won't start water heater on gas side. Electric side works. Also, any light controlled by incommand won't work, but light switched separately like bedroom and bathroom work. Awning works but awning lights don't. Ideas? Is there a reset for the light controls in incommand?
No one told me about the box inside storage I had one slide to slide out command box inside Quitman wife asked me about thebox I did slide it out later on after connecting to 50 amp I reset the box inside there's a reset button on top of the black box inside the camper
I HAVE A COUGAR 368MBI . MY COMMAND SYSTEM WILL NOT SHOW THE 4 ICONS. WHEN I PUT MY PASS CODE IN IT AND PUSH THE AIR ICON IT GOES TO ZONE A AND MY AIR WILL NOT COME ON. IT WILL LET ME SET THE TIMER BUT WILL NOT LET IT RUN ALL THE TIME
To get to the next zone, push the > symbol at the top right of the screen. It's unfortunate that inCommand comes up on a lot of 30A, one-A/C rigs with the uninstalled A/C as a default, but it does. (I finally edited it out of my floorplan because it's 100% useless for it to be there.)
This is awesome information, I subscribed to this. however I have a problem starting my hvac system. On the screen it shows the temperature set but below it’s Now registering zone read. -0 Fahrenheit. What needs to be adjusted? Thank you.
I'm glad I found this comment and share my solution to your problem. I had the very same problem. I found solution on Keystone blog. You must turn off all 12 vdc including solar, shore power, battery shut off for one minute. Th
Got it, problem resolved with the iN-Command Control Systems. i disengage the 12v battery switch to off position and the display will be off and then after 2 minutes the display will reset and my 2nd AC come back to work properly. thanks so much Mr Gerry because i plan to call to a service tech but at now i don't have to be hot this weekend. Saturday 9-10-2022 (92 Degress F here in Central Texas)
Hi, I cannot figure out how to turn the AC on from the touch pad. It's been on before but now that I've plugged it into the 50v outlet it just doesn't turn on. Am I missing something?? Power works, slide outs, everything but getting the AC to kick on. I've watched this video and I feel like I've done everything I need to. Still won't kick on! PLEASE HELP!!!
IF the system has sensed the temp has dropped below a certain temperature sometimes it will freeze this. Try disconnecting your shore power AND disconnecting the battery power (use the battery disconnect). See if that power cycling works
Ours just did that recently. We did the same as suggested, disconnected shore power, disconnected battery but reset in command in the bay compartment. Only then did the ac come back on.
My rear AC comes on in fan mode when I'm using the furnace. Rear AC is set to heat, fan is auto, there's no schedule or mode B settings. Is that normal?
There's a non-obvious glitch in the Dometic gateway that is documented in the inCommand manual: if you have the system set to furnace and the fan set to OFF, it really means LOW. To get it OFF, you have to set it to AUTO. Are you sure you don't have your fan set to OFF?
I need help ! New phone! In-Command system is blue tooth connected to my phone, but when I open app it shows “ Connecting” but never opens up! I’ve reinstalled app same issue!!
Jason, are you on a iPhone or android? I know you said you have reinstalled, but did you remove the bluetooth link before uninstall/reinstall? I would be sure to forget the device in bluetooth, uninstall, reboot phone, reinstall
@@AGreatAdventure Wow Thanks it worked I follow your instructions, and it worked Thanks a ton!!!! I also had to link my in-command to wifi and update it!!!
@A Great Adventure I have no room temperature showing on my screen, phone or command head, so my furnace will not come on. Any tricks to get that fixed? Thank you.
We have a 2020 fuzion 427 and my biggest complaint is how in-command constantly causes nothing but problems. We have reached out to the creators of this deboucle and they are more hassle than the product. The system will not complete an update or let you connect becauase it's constantly saying DC offline. Now you say well it must be the wifi nope not the problem it's been downloading to 3 quaters and then going DC offline. So I thought lets try hot spot off my cell provider nope the unit will not accknowledge anything other than the plan from furion antena service. So we have a system that is dormant for most of the time while being DC offline. Solutions get rid off the system and put light switches back in the products. Love the hauler hate the tech. Anthony K British Colunbia Canada PS will not accept a manual update with stick just in case the in-command people are listening
it sure would have been nice to hear just how to set up the phone as a remote device. talking about an aspect of the system without explaining how is ridiculous heck I now know how to set timer and auto function on A/C But not cell phone auto operation
The Passcode feature is stupid. The only possible benefit of a Passcode is if your kids are messing with it, but it's high enough on the wall that a toddler can't reach it.
Very valuable information. He does an excellent job explaining the unseen
Thanks for this, great information and explanation!
That just taught me a few good things about my in command.
Thank you !!!
Can the in command center be reset from the master control box in the basement? Our screen is lit but no display of options. Of course the slides are out but no awnings are out. We car in Colorado and start jobs on Wednesday next week. Can't bring it back to Indiana.
Is there a way to DIM the ceiling lights in our '21 Keystone Cougar 29RKS with the In-Command System? I saw elsewhere online that ASA has developed a lighting dimmer module for the In-Command System but I was unable to find a source for the module and/or how it would be wired into the In-Command System.
My rear A/C show an inside temp -F and will not run heat / cooling or just fan. I have already tried removing all power from unit to reset and didn’t work as it did in the past. I have read to make sure my unit has the EOL resister located in the roof cavity must unsure where to find that? Any help would be great.
you have to remove the power completely .. unplug and disconnect the battery cables for a few. Other than that it could be an error with the control
Deadly thank you
What makes our slide out not want to come in when we first hit the in button? Goes out fine, have to play with IN button to retract. Thoughts?
We have a keystone cougar 2022 29rli. Our unit does restart often as well as we try to press a button and it freezes and needs to be reset. Is this a problem with the unit or how do we test it to stop doing a reset or freeze?
I need help with the command the air conditioner keeps coming on .I only want the heat on only.how do I do this and how do you turn the rv off
how is it for speed and responsiveness - ive had a couple units with the LCI system - its subpar - would prefer a regular control panel with switches etc.
Can. You show me where my inverter/converter is located on my Cougar 23MLS?
our control panel won't come on, what could it be?
How do the fresh, grey and black water tank tabs at the top of in command work.? I press on them and nothing happens!??
Just above the in command is a light switch and something above that switch. What is it?
Does the wigswip has to be out to turn on the AC
My Incommand screen went low lit blank white after changing RV batteries. How do I get my screen back?
We can’t turn off our awning lights. Any tips?
can you set the lights on a timer with this system?
No, but if you have it connected to the campgrounds wifi or thru cellular, you can control certain things remotely.
I will have it always connected to Bluetooth and Wi-Fi here at home or at the campgrounds or internet connection with Winegard connect antenna we have. What would be nice is if the lights on a timer feature could be added someday. Here at home, we use Feit electric app connect to our outside lights with the special light bulbs. Works great but with this function on my phone with iN_-command when we are out at dinner, I can at least turn on the awning lights before we get back to the RV which will be nice.
How do I reconnect our awning to the system? Everything else works except the awning!!
Troubleshooting my incommand now on 2020 Fuzion 369. Wall control panel won't start water heater on gas side. Electric side works. Also, any light controlled by incommand won't work, but light switched separately like bedroom and bathroom work. Awning works but awning lights don't. Ideas? Is there a reset for the light controls in incommand?
No one told me about the box inside storage I had one slide to slide out command box inside Quitman wife asked me about thebox I did slide it out later on after connecting to 50 amp I reset the box inside there's a reset button on top of the black box inside the camper
I HAVE A COUGAR 368MBI . MY COMMAND SYSTEM WILL NOT SHOW THE 4 ICONS. WHEN I PUT MY PASS CODE IN IT AND PUSH THE AIR ICON IT GOES TO ZONE A AND MY AIR WILL NOT COME ON. IT WILL LET ME SET THE TIMER BUT WILL NOT LET IT RUN ALL THE TIME
To get to the next zone, push the > symbol at the top right of the screen. It's unfortunate that inCommand comes up on a lot of 30A, one-A/C rigs with the uninstalled A/C as a default, but it does. (I finally edited it out of my floorplan because it's 100% useless for it to be there.)
This is awesome information, I subscribed to this. however I have a problem starting my hvac system. On the screen it shows the temperature set but below it’s Now registering zone read. -0 Fahrenheit. What needs to be adjusted? Thank you.
Having same issue no heat air any suggestions
I'm glad I found this comment and share my solution to your problem. I had the very same problem. I found solution on Keystone blog. You must turn off all 12 vdc including solar, shore power, battery shut off for one minute. Th
Sorry for incomplete comment. Then after shutting off 12vdc reboot command control. This is separate from doing a reset.
@@gerrycapps4462i have the same problem my 2nd AC not come on. let do this test to see if the 2nd AC will return back to work.
Got it, problem resolved with the iN-Command Control Systems. i disengage the 12v battery switch to off position and the display will be off and then after 2 minutes the display will reset and my 2nd AC come back to work properly. thanks so much Mr Gerry because i plan to call to a service tech but at now i don't have to be hot this weekend. Saturday 9-10-2022 (92 Degress F here in Central Texas)
How do i reset the passcode if I don’t know the current one? Please help
Hi, I cannot figure out how to turn the AC on from the touch pad. It's been on before but now that I've plugged it into the 50v outlet it just doesn't turn on. Am I missing something?? Power works, slide outs, everything but getting the AC to kick on. I've watched this video and I feel like I've done everything I need to. Still won't kick on! PLEASE HELP!!!
IF the system has sensed the temp has dropped below a certain temperature sometimes it will freeze this. Try disconnecting your shore power AND disconnecting the battery power (use the battery disconnect). See if that power cycling works
Ours just did that recently. We did the same as suggested, disconnected shore power, disconnected battery but reset in command in the bay compartment. Only then did the ac come back on.
My rear AC comes on in fan mode when I'm using the furnace. Rear AC is set to heat, fan is auto, there's no schedule or mode B settings. Is that normal?
That is normal, it circulates the air :-)
There's a non-obvious glitch in the Dometic gateway that is documented in the inCommand manual: if you have the system set to furnace and the fan set to OFF, it really means LOW. To get it OFF, you have to set it to AUTO. Are you sure you don't have your fan set to OFF?
How can re calibrate my in command touch pad, the display will not line up with what is touched
Have you tried a system reboot? Kill all power to your camper and restart?
Can I connect the system to more than one iPhones?
Yes, both my wife and I are connected. Now only 1 can be "active" at a time though
I need help ! New phone! In-Command system is blue tooth connected to my phone, but when I open app it shows “ Connecting” but never opens up! I’ve reinstalled app same issue!!
Jason, are you on a iPhone or android? I know you said you have reinstalled, but did you remove the bluetooth link before uninstall/reinstall? I would be sure to forget the device in bluetooth, uninstall, reboot phone, reinstall
@@AGreatAdventure Wow Thanks it worked I follow your instructions, and it worked Thanks a ton!!!! I also had to link my in-command to wifi and update it!!!
@@jasonmacallister5465 Glad that worked for you. Phones can be so funky with bluetooth at times. Happy Camping!
@A Great Adventure I have no room temperature showing on my screen, phone or command head, so my furnace will not come on. Any tricks to get that fixed? Thank you.
How can I change the temp settings fahrenheit to celsius????
Go to Settings > either Units or Measurements (I cannot recall which it's called) and then you can change it there. Happy Camping!
@Sheila Fiorin, did you get the “Celsius” display to work?
I cannot get the HVAC to start my units. What can we try???
What is happening? Can you give me more details
If you have not got your hvac system going yet, there is a reset button on your screen
How do I change from F to C?
I love mine
2016 keystone Montana. In command will not connect to BCM? Help
Why I keep getting applications errors
how do you turn the ac off?
Press the MODE circle until it shows OFF.
We have a 2020 fuzion 427 and my biggest complaint is how in-command constantly causes nothing but problems. We have reached out to the creators of this deboucle and they are more hassle than the product. The system will not complete an update or let you connect becauase it's constantly saying DC offline. Now you say well it must be the wifi nope not the problem it's been downloading to 3 quaters and then going DC offline. So I thought lets try hot spot off my cell provider nope the unit will not accknowledge anything other than the plan from furion antena service. So we have a system that is dormant for most of the time while being DC offline. Solutions get rid off the system and put light switches back in the products. Love the hauler hate the tech.
Anthony K British Colunbia Canada
PS will not accept a manual update with stick just in case the in-command people are listening
it sure would have been nice to hear just how to set up the phone as a remote device. talking about an aspect of the system without explaining how is ridiculous heck I now know how to set timer and auto function on A/C But not cell phone auto operation
ua-cam.com/video/e2llf1NPsg8/v-deo.html
The Passcode feature is stupid. The only possible benefit of a Passcode is if your kids are messing with it, but it's high enough on the wall that a toddler can't reach it.
have had nothing but problems with this system. terrible idea to have everything run through that failure prone junk tablet
My in-command connection keeps dropping from my phone app. What should I do?