My bad- I had a feeling that I'd probably not quite followed the video PRECISELY- so I tried again, today, and this time it worked. Not sure what was wrong yesterday, but it's possible I'd inadvertently left a tiny gap somewhere by being a little too hasty. SolidWorks may not be very forgiving (nor should it be)- though sometimes the error it reports can be perhaps a little misleading. Mine came out very nicely- I had to change that last fillet value just a bit for it to work on mine, but overall, it's a success! Thanks once again for another fascinating solid model! :)
Greetings congratulations excellent work I would be interested in knowing how I can get this type of spiral fan for a project in my residence in Puerto Rico. where would it be possible to obtain this type of fan for my residence? Thanks in avance.
Has anyone got a sketch file copy of this design knocking about? Was thinking to see about 3d printing one but I also feel it would need supports between the blades and I don't have access to Solidworks. Many thanks in advance.
Aw DAMN! Thought this was going to be an easy one, but SW ver 2015 is not able to use a spiral for Direction 2 of that 1st boundary surface. Oh, well. At least I know that when Dassault upgrades it's Solidworks to newer versions, it doesn't just add little additional capabilities to justify generating new sales- it also improves existing functions, as well.
@@EasyCADSolutions Hey, i wanna ask you something. What is difference between blade diameter and rotor diameter ? and one more question, what is frame dimension (shorter arm & longer arm) on this turbine ?
Good job...but.... What´s the criteria to draw the base spiral? I checked and IS NOT the fibonacci spiral, so what are the criteria to design the base spiral? do you know them??...Thanks
First of all i am glad you like the video and this spiral is basically an intersection of a cone and cylindrical spiral. If you have more queries contact me via WhatsApp +919793662583 or mail me at nishant13071992@gmail.com
I will be easy if you practice 💪 Are you interested in learning Solidworks Surfacing from basic to advanced? If yes then contact me for DEMO class via WhatsApp +919793662583 or mail me at nishant13071992@gmail.com
It's easy, Just make a blade as shown in the video and Use the Flatten Tool. It will give you a flat sheet like portion that can be used for further reference for sheet cutting in order to make the turbine blades This technique is widely used in the welding process of car chasis pipes
You deserved my subscription.. every single video on your Chanel is very informative for people like me who are new to Solidworks. You can save a lot of time if you use 3D mouse maybe?
Hello there! Can you share a model of this? I am using this in a house design, and I am looking for a model that I can insert and animate. Or do you know how I may be able to model this in revit?
@@EasyCADSolutions Hello there! That's very nice of you, I have downloaded it! However how do i get it into revit? can I have as .ifc file or stl or .step?
@@EasyCADSolutions Hello there! By the way, never mind to provide a different file extension. I have found a way round it to convert it to .Sat by opening it in 3dsmax. Thanks for the 3dObject!
@@EasyCADSolutions , did follow your instructions but still not working.. but I played around it by changing only the Helix/Spiral1 parameters, variable pitch, region parameters on row 2, colume dia, I've changed the value of 1 to 0.1 and finally worked.
@@EasyCADSolutions yeah id imagine but imagine how much more efficeint it would be. perhaps even for subs. it ought to be less turbulent and therefore stealthy. have a word with the mod im sure they'd be interested.
@@EasyCADSolutions i even wonder how it would work for a gas turbine compressor stage as well ! in fact any ap that needs an efficient method to move gas or a liquid. since both mediums are essentially fluids.
i can even imagine these as propellers on an aircraft or as ducted fans . we're rapidly moving towards electric aeroplanes indeed some are already available and this design would bring great performance/efficiency beneits.
@@EasyCADSolutionsSaludos. Por favor deseo hacer éste proyecto pero solo cuento con materiales desechables. Quisiera que me ayude a darme las medidas y como puedo encontrar el motor .Mi familia a quien quiero ayudar en mi país
I was actually mesmerized watching this while things were added till the finished item
Nice work🤔
Thank you for watching my videos 🤗
For more queries and suggestions contact me via WhatsApp +919793662583
That is pretty nifty stuff, how did you think of doing that, in some book or research paper, it's mind boggingly awesome. 😎👍
Actually i made it by myself by taking assumptions and some how i got right and achieved that shape
My bad- I had a feeling that I'd probably not quite followed the video PRECISELY- so I tried again, today, and this time it worked. Not sure what was wrong yesterday, but it's possible I'd inadvertently left a tiny gap somewhere by being a little too hasty. SolidWorks may not be very forgiving (nor should it be)- though sometimes the error it reports can be perhaps a little misleading.
Mine came out very nicely- I had to change that last fillet value just a bit for it to work on mine, but overall, it's a success! Thanks once again for another fascinating solid model! :)
Yes, Little mistakes will cause a huge problem in Solidworks
Good job 👍
Thanks 😇
Greetings congratulations excellent work I would be interested in knowing how I can get this type of spiral fan for a project in my residence in Puerto Rico. where would it be possible to obtain this type of fan for my residence? Thanks in avance.
Thanks 👍
But i don't have any idea where to get this turbine in Puerto Rico. You can search it on Google with the keyword 'Liam F1 Wind Turbine'
Has anyone got a sketch file copy of this design knocking about? Was thinking to see about 3d printing one but I also feel it would need supports between the blades and I don't have access to Solidworks. Many thanks in advance.
you found it?
Muchas gracias. Bien!
Welcome 🤗
Could you plss make another of designing of it's frame with generator and all?
Okay, I will try
And, Thanks 🙏 for watching my Tutorials
@@EasyCADSolutions Please let's do this :)
Aw DAMN! Thought this was going to be an easy one, but SW ver 2015 is not able to use a spiral for Direction 2 of that 1st boundary surface. Oh, well. At least I know that when Dassault upgrades it's Solidworks to newer versions, it doesn't just add little additional capabilities to justify generating new sales- it also improves existing functions, as well.
Yes, It's True
Magic !
Thanks 😊
Hello, can you make tutorial about wind flow simulation with this turbine on solidworks ?
I will try because simulation is not my expertise
@@EasyCADSolutions🙏🙏
@@EasyCADSolutions Hey, i wanna ask you something. What is difference between blade diameter and rotor diameter ?
and one more question, what is frame dimension (shorter arm & longer arm) on this turbine ?
If possible STL file link for 3d printing
Check the link at the bottom of description
Good,thank you..
Welcome 😊
Can you convert each blade in a sheet metal part?
You can use the flatten command after making one blade. It will unfold the blade into planar part
You should make it in reverse. It wod be a MUCH BETTER wind turbine
Any References?
Could you please do video on variable blade angle of Archimedes wind turbine
I will try
На бумаге! На бумаге давай! С расчётами!
И в разложенном на плоскости виде
Please make comments in English because i don't know this language
Good job...but.... What´s the criteria to draw the base spiral? I checked and IS NOT the fibonacci spiral, so what are the criteria to design the base spiral? do you know them??...Thanks
First of all i am glad you like the video and this spiral is basically an intersection of a cone and cylindrical spiral.
If you have more queries contact me via WhatsApp +919793662583 or mail me at nishant13071992@gmail.com
It is very hard to me.thanks sir🙏
I will be easy if you practice 💪
Are you interested in learning Solidworks Surfacing from basic to advanced? If yes then contact me for DEMO class via WhatsApp +919793662583 or mail me at nishant13071992@gmail.com
the music sounds like the floyd doing a robin trower tune. what is it btw?
Satya_Yuga in UA-cam Audio Library
Can you find out on paper the size of the unfolded blade?
It's easy, Just make a blade as shown in the video and Use the Flatten Tool. It will give you a flat sheet like portion that can be used for further reference for sheet cutting in order to make the turbine blades
This technique is widely used in the welding process of car chasis pipes
@@EasyCADSolutions Thank you so much.
@@EasyCADSolutions Can you help me, I am having trouble aligning the turbine blade.
Aligning means?
To align all three?
Man, I thought I was watching "Kill Bill" when that music started up!!
😅😅
3:05 i am unable to use thicken2 ,can you guide me
Use Exact steps to follow
If you still have queries contact me via WhatsApp +919793662583 or mail at nishant13071992@gmail.com
can you provide a 2d drawing of 1 blade..
i would like to make a propeller like this
Yes, Sure
You can use flatten to make it flat
For the file contact me via WhatsApp +919793662583 or mail me at nishant13071992@gmail.com
Hello. Can you givea template for cutting the wings?
You can create by yourself
Make one wing and use flatten command and it will give you what you want
Very useful
Thank You 😊
You can contact me via WhatsApp +919793662583 for queries
You deserved my subscription.. every single video on your Chanel is very informative for people like me who are new to Solidworks. You can save a lot of time if you use 3D mouse maybe?
Thanks for your valuable feedback 😊
Hello there! Can you share a model of this? I am using this in a house design, and I am looking for a model that I can insert and animate. Or do you know how I may be able to model this in revit?
It's available on my grabcad profile
Link is in the description
@@EasyCADSolutions Hello there! That's very nice of you, I have downloaded it! However how do i get it into revit? can I have as .ifc file or stl or .step?
@@EasyCADSolutions Hello there! By the way, never mind to provide a different file extension. I have found a way round it to convert it to .Sat by opening it in 3dsmax. Thanks for the 3dObject!
Alguien sabe las medidas
Yes, You can measure it by unfolding it. To unfold, use the flatten tool in Solidworks
Is it possible to 3d print this?
Yes, it could be
1:35 I can't make it, always getting **Error**Sketch3
Kindly follow the same steps in the new file without altering the process.
I hope it will work
@@EasyCADSolutions , did follow your instructions but still not working.. but I played around it by changing only the Helix/Spiral1 parameters, variable pitch, region parameters on row 2, colume dia, I've changed the value of 1 to 0.1 and finally worked.
Greetings, Could you share the file?
You can download it from my grabcad account
For more queries and suggestions contact me via WhatsApp +919793662583
@@EasyCADSolutions thank you very much, very interesting
that would be a great design for a boat water jet
Yes, But it needs some modifications for water as a flowing fluid
@@EasyCADSolutions yeah id imagine but imagine how much more efficeint it would be. perhaps even for subs. it ought to be less turbulent and therefore stealthy. have a word with the mod im sure they'd be interested.
@@EasyCADSolutions i even wonder how it would work for a gas turbine compressor stage as well ! in fact any ap that needs an efficient method to move gas or a liquid. since both mediums are essentially fluids.
i can even imagine these as propellers on an aircraft or as ducted fans . we're rapidly moving towards electric aeroplanes indeed some are already available and this design would bring great performance/efficiency beneits.
Yes, i will have potential to do this with some modifications
anyone a suggestion or a movie how to do this in Autodesk inventor?
Actually i don't know because i am not as use too as like in Solidworks
Sir this is hard to me 😢😢
You need to practice it
For any help contact me via WhatsApp +919793662583
😊😅😮🎉@@EasyCADSolutions
@@EasyCADSolutionsSaludos. Por favor deseo hacer éste proyecto pero solo cuento con materiales desechables. Quisiera que me ayude a darme las medidas y como puedo encontrar el motor .Mi familia a quien quiero ayudar en mi país
Genius
Thanks 😇
Name of song? Pls
Actually I don't know the name
I just put it according to the Video length
The perfect Turbine is Staring you right in the face. You just have to Reverse engineer it
Hoy voy a hacer algo para que me pedía el corazón generar electricidad muy
👍
Qua hay
Thanks 👍
Economico
Esmeraldas Ecuador
??
Con croquis 3D
What does it mean?
This is what should be on every electric car to drive a generator to recharge the batteries as you drive the car
Yes, The idea is great 👍
You would use 5 Watts of battery power to overcome the wind drag to generate 3 Watts of power. It would be a loss.
Hi
Hi
, que barrulhadas, vídeos bagunças , tem alguma vídeo detalhes fabricações deste primeiro corte no painel, das placas
Desculpe pelo incômodo
Lo ideal seria que lo haga ese diseño en una lamina de acero o aluminio indicando las medidas
Okay 👍