One of the better videos I've seen on the Apex, thank you. Don't know why more into is not out there but maybe as BRS owns them now, more will come. After your issues with heaters, I would lean more to an Inkbird to control the two heaters as main and Apex as a backup if inkbird takes a dump with a larger heater swing on the Apex but you know better than me so all good.
I wasn’t very aware of what the Apex was capable of. Definitely seems more worth it than I thought. Super cool tech and really good video explaining it. Love the channel
Great video mate it looks so easy to set up as I wanted to get one but they looked so hard to set up in the past but with this video I might get one now just want to say thank you for your videos really enjoyed them big thumbs up
Geez! I wish my Apex Pro set up went that easy! After I received it and attempted to set it up, the Energy Bar would not power up! They sent me a new one. Now, I am stuck on getting it connected. It will not connect either by Ethernet or WiFi. Very frustrating! Been bouncing back and forth with Apex troubleshooting it but still does not work. I am so close to packing it all up and sending it back!
Never thought about combining certain equipment into 1 plug. Does it matter which 2 to 1 plug I get or can I get any from amazon? Like does it have to be a certain guage wire or appliance wire?
Great video. Personally I would not have the heaters set to fallback on as you have it currently setup, your actual heater could have failed without you knowing as the apex controls the temp. Worst case heater could have failed in on position and if the apex ever gets disconnected it will default to on cooking your tank. Things can survive a bit of a lower temp much longer giving you time and ample warning to fix it. Also it is recommended to use the heaters internal thermostat as heaters are cheap and then have the apex as a backup to turn it off if ever needed. As the powerbars relays can get worn down, I believe brs calculated 3 million plus on off cycles per year on the heater outlet. Heaters are much cheaper then a new powerbar. Sorry to see the tank crash. Just for interest sake why did you go with the apex el instead of the full one that monitors salinity and orp? After the last tank crash I thought you would put as much redundancy in as possible. And if salinity is the first thing that comes to mind why skip on that?
Hey March! Pleaseeee make an Apex Fusion tutorial. I got so excited when you started talking about the feed modes and then you said “I’m getting ahead of myself” lol. I would greatly appreciate it. There is barely any videos on how to set these things up.
Great Vid, but please please add/fix the overview history so we can see daily values when a previous day is selected it was on old app. I know in reports but 2-3 menus in.
I just set up my apex, all of my plugs in the app have those grey lines going across that whole plug switch panel, I can’t figure out why they won’t work, so I can’t switch any of them on or off. anyone know why they show up like this?
It’s like spaghetti 🍝 junction in there March, another disaster waiting to happen buddy. You have been warned, 😔 take heed and get it sorted. ⚡️⚡️. 😔🏴
They have the EL which is like $500 ‘entry level’ there are cheaper ways to do it. I’ve seen where some has used raspberry pie & some coding & other stuff. I just got my apex back around March & haven’t had any issues yet. I plan on adding a bunch more. Hopefully I don’t have any issues 🤞🏼
@@Tigglebitties yea not a fan of it tho. We need something more apex style that’s much more affordable with the same functions. If I was rich I would create a controller that would outcompete the apex in price and change the entire market. It’s 2023. Our monitoring of our tanks should be much better and affordable by now.
Thank you for doing this! Can’t wait to watch the rest of this series!
Well now it seems a lot less scary with you explaining it! Thank you for great info as always!
One of the better videos I've seen on the Apex, thank you. Don't know why more into is not out there but maybe as BRS owns them now, more will come. After your issues with heaters, I would lean more to an Inkbird to control the two heaters as main and Apex as a backup if inkbird takes a dump with a larger heater swing on the Apex but you know better than me so all good.
I wasn’t very aware of what the Apex was capable of. Definitely seems more worth it than I thought. Super cool tech and really good video explaining it. Love the channel
Great video mate it looks so easy to set up as I wanted to get one but they looked so hard to set up in the past but with this video I might get one now just want to say thank you for your videos really enjoyed them big thumbs up
Geez! I wish my Apex Pro set up went that easy! After I received it and attempted to set it up, the Energy Bar would not power up! They sent me a new one. Now, I am stuck on getting it connected. It will not connect either by Ethernet or WiFi. Very frustrating! Been bouncing back and forth with Apex troubleshooting it but still does not work. I am so close to packing it all up and sending it back!
Never thought about combining certain equipment into 1 plug. Does it matter which 2 to 1 plug I get or can I get any from amazon? Like does it have to be a certain guage wire or appliance wire?
Great video. Personally I would not have the heaters set to fallback on as you have it currently setup, your actual heater could have failed without you knowing as the apex controls the temp. Worst case heater could have failed in on position and if the apex ever gets disconnected it will default to on cooking your tank. Things can survive a bit of a lower temp much longer giving you time and ample warning to fix it. Also it is recommended to use the heaters internal thermostat as heaters are cheap and then have the apex as a backup to turn it off if ever needed. As the powerbars relays can get worn down, I believe brs calculated 3 million plus on off cycles per year on the heater outlet. Heaters are much cheaper then a new powerbar.
Sorry to see the tank crash. Just for interest sake why did you go with the apex el instead of the full one that monitors salinity and orp? After the last tank crash I thought you would put as much redundancy in as possible. And if salinity is the first thing that comes to mind why skip on that?
Hey March! Pleaseeee make an Apex Fusion tutorial. I got so excited when you started talking about the feed modes and then you said “I’m getting ahead of myself” lol. I would greatly appreciate it. There is barely any videos on how to set these things up.
Do i need the powerbar if i only want to monitor the ph, temp and salinity?
Great Vid, but please please add/fix the overview history so we can see daily values when a previous day is selected it was on old app. I know in reports but 2-3 menus in.
Can you also set up a GHL system
Yes! Programming videos please. Great video.
What happened to the most expensivest nano ?
Apex is nice, I could only afford inkbird heating and cooling thermostat.
I have the hydros controller and love it
I just set up my apex, all of my plugs in the app have those grey lines going across that whole plug switch panel, I can’t figure out why they won’t work, so I can’t switch any of them on or off. anyone know why they show up like this?
Question why dont use ghl?!
can't compare the two, apex for the win
I dont need one, but i want an apex so bad lol
You should of demonstrated the tasks for setting things up. Much easier for a beginner.
I want an apex system now 🥺🥺
Hope ya bought a case of beer and a bottle of valium
I wish lol
It’s like spaghetti 🍝 junction in there March, another disaster waiting to happen buddy.
You have been warned, 😔 take heed and get it sorted. ⚡️⚡️. 😔🏴
Good morning from philippines time00:16
Predictive text.... :D
The apex is such a ripoff it shouldn’t be that expensive someone needs to make another type of apex to compete
They have the EL which is like $500 ‘entry level’ there are cheaper ways to do it. I’ve seen where some has used raspberry pie & some coding & other stuff. I just got my apex back around March & haven’t had any issues yet. I plan on adding a bunch more. Hopefully I don’t have any issues 🤞🏼
@@Chris58369 all I really want is the salinity probe. Other than that I have a wifi power strip that I programmed
Hydros did.
@@Tigglebitties yea not a fan of it tho. We need something more apex style that’s much more affordable with the same functions. If I was rich I would create a controller that would outcompete the apex in price and change the entire market. It’s 2023. Our monitoring of our tanks should be much better and affordable by now.