*MUST SEE* Ford 6.7 Powerstroke NO HEAT - Temp Gauge stuck on LOW | Guess what...?!?
Вставка
- Опубліковано 4 вер 2024
- 6.7 Powerstroke, No heat, blowing cold, temp gauge not moving. Does your ford 6.7 have any of these concerns? Watch and possibly answer your questions here! What is up 6.7 gang!?!?! I hope that this finds you well and that your about to fix your problem tonight. This wasn't that bad to do and was fairly quick to diag. Have any of you had to do this same repair, I have only had a few. Tell me what you all think! Remember to LIKE - COMMENT - SUB - SHARE
Join this channel to get access to perks:
/ @powerstroketechtalkwarod
To get hooked up like PTT please check out this link!
You won't be disappointed, I wasn't...trust me, ALL worth it!
****** www.limitlessau... ******
Check out these other 6.7 Playlists!!
6.7 Oil Seals Replacements
• FORD 6.7 Oil Leak Repa...
6.7 Turbo Videos
• Ford 6.7 Powerstroke T...
6.7 Repair Videos
• FORD 6.7 Powerstroke R...
6.7 Engine Light Videos
• FORD 6.7 ENGINE LIGHT ...
6.7 Maintenance Videos
• FORD POWERSTROKE MAINT...
Check out my Instagram & Facebook
@PTT_W_AROD / Aaron Power Stroke
Business Inquiries: powerstroketechtalkwarod@gmail.com
Music: ------------------------------
Know Myself - Patrick Patrikios
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email powerstroketechtalkwarod@gmail.com
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.
Had a great customer of ours in and replaced the upper hose because it was leaking pretty good at the radiator. Looked at the thermostat while I had the hose off and noticed the o-ring was torn! Went ahead and replaced that too! 340k+ truck! 💪💪
I have a 2012 63000 miles that I bought new so far no issues. Thanks ARod for all you do!
🙏🙏
My 19 has this issue. 81k. Will do a tstat this week!
I think I will change the hose orings this summer...thanks for the tech tip!
Holy Smokes!!😲 I thought only Louisiana roads punch you in gut & backside at the same time.😤🥴...one more customer not freezing to death🥶...good work my man 😉👍💪💯
They baddddd
Oh no. Ohio and PA have some horrid sections of roadway that make Louisiana look great. 😂
Carli Suspension will cure you from any bad roads.
Yea not these, r u crazy
@@Dieselnm101 sure it will. Also make it have less payload and towing capacity. Towing capacity from 15k to 13k or less.
Option 2. Get better shocks that can help control rebound rates. OE shocks will let that suspension unload quick.
ARod, haven’t had this issue so far on my 2018. When I eventually do, what’s your opinion on the SPE Low Temp / Hi Flow thermo? Worth the $64 upgrade from OEM? Once again, thanks for showing us how it’s done with/ the level of detail to make this a DIY-friendly project. You sir are a master educator. You have the experience to know what to do, and the comms skills to explain to us ordinary humans how to do it. Thank you!
Nope leave the tstat alone. Member we want heat!!
I work on nasty oily aircraft engines we find good ol scrubbing bubbles is the best degreaser hands down. On the topic of your problem with the thermostat, the ford red coolant tends to break down and coagulate and stick to surfaces messing up thermostats, radiators, water pumps ect . I got rid of my red ford coolant and flushed with yellow ford coolant at 30k and have no issues so far. 2015 f250 PSD
Wow, this also shows just how long it takes these 6.7's to get up to normal operating temp
Foooooorevvvverrrrrrrr
Especially when running a good full synthetic motor oil and oil friction additive...dropped my regular temps close to 10 degrees.
Nice work and explanation! Love those smooth roads? 🤣🤣🤣
Awful
In my gasser I tried a new kind of thermostat that was supposed to fail in the open position as opposed to closing when it fails. Problem was on a hot day with the a/c on sitting at a stop light it would momentarily get hotter and the thermostat would open all the way and go past these little prongs sticking out and then the thermostat couldn’t close. You are given no indication that anything is wrong except the engine takes longer to warm up, runs cooler than normal and then in winter no heat! Good odors but needs more work.
Doesn’t look like too bad of a job. I’d rather do a thermostat than a water pump or unclog a heater core or radiator.
Keep up the great content, see you tomorrow night.
Not bad at all, see ya there partner😉😉
I have the same symptoms, blower motor works great, but can barely seem the get heat. The difference is my truck is reaching 188-197f average while driving/parked or warmed up but can’t seem to pump hot air out the vents. An hour drive and hands are numb lol.
Year?
Nice to see they make the thermostat easily serviceable. Not a big fan of those quick connect things but I’m used to them on my 23 yr old Jetta. Just have to be prepared to bust them when working on them. Do you recommend some sort of lubricant on those orings so they come apart easier? I’ve been using a haze of silicon oring lube from Napa.
U can use some silicone
Seems the thermostats we’re stuck open or just cracked open.
What I do find strange though. In my 17 and yes I do know there are some cooling system differences. I will begin moving some heated air when oil temperature is at 100° F. This is without knowing the actual coolant temp but it is definitely within 20° or abouts of oil operating temp. This begs the question if the thermostats are closed and not flowing to the passenger side head what the system does to manage heat. ECT sensor is on the drivers side of the crossover. This kinda leads me to believe it was actually stuck closed and not pushing coolant into the heater core as there wasn’t flow. Why the truck only registered 165°F is almost strange. Perhaps I need to study the coolant flow diagram again to see why or if a stuck closed thermostat could cause a no heat condition.
Personally, I replace thermostats, serviceable O-rings and coolant on both systems at 100k miles. On my 17, there are 3 thermostats. Earlier vehicles have 4. I did not use Ford VC-13G to replace VC-3B. I went back with an ELC coolant with the correct spec and without 2-EHA, which is a corrosion inhibitor and also a plasticizer. 2-EHA is present in DexCool and Ford VC-3. It will soften and degrade any rubbers to the point of leakage. Ford removed this in the VC-13 formulation and utilized phosphates to replace it as the corrosion inhibitor. Good move on Ford’s behalf.
Nice work Arod. Great video!
6-7 Y/O truck in the cold of Michigan with the oem batteries...? Would also be due for first change of coolant in both loops by time. I wonder if the build up the orange coolant leaves could've washed up to the thermostat and been blocking it from sealing.
Appreciate the info as usual! Do you know anything about the low temp high output thermostat SPE motorsports makes? It has really good reviews, but I am curious if you had any experience or thoughts about it. Seems to be a good idea and does what it is designed to do, but curious what the long term effects might be due to Ford engineers designing the thermostat to open a little later rather than sooner like SPE's.
LEAVE IT ALONE, thats all im am allowed to say. Steer clear....
My 2008 Ford F450 with a 6.4L Powerstroke water temperature gauge is staying near the cold range and barely defrosts the windshield after idling for 20 minutes. I think I also need a new thermostat.
Wow very nice work ARod looks like a job I can do myself, thanks for sharing ARod u the man
Thanks so much for all u do for us!
You bet
I just replaced my thermostat due to a p0128 code. It did not fix it for me. My air is cold coming out of the vents still. 2017 6.7 f250.
Good video!
I have low heat but it’s the heater core needs to be flushed in Miami I don’t use it much I’ll back flush it one day
I figured you were on the ford test track......
Ha!
Nice video...
In a similar vane...is there somewhere I can download the instructions for a 6.7 coolant backflush
My 2012 was hitting 235 with no codes once I got a tuner I noticed it and changed the oil cooler and never see 205 at 80-90 mph
Sick, thanks for sharing!!!
So what is your opinion on the S&P low temp thermostat
..the S&P gained two points today as the closing bell rang while the DOWJones were up 20 points since yesterday....back to you Mort
@@PowerStrokeTechTalkwARod So I take it you wouldn’t care for their low temp thermostat
@@PowerStrokeTechTalkwARod Sorry SPE low temp thermostat
A guy who can read between the lines 👍👍
How do you fill up an engine that still has the orange coolant? Do you mix with the yellow stuff? Or replace it completely?
I drain the block
My car was in the shop when the mech said I blew a seal.
I told him what I do for recreation is none of his business.
!
👍
Not orders? Idea!
That was probably a pricey job for just the thermostat being stuck open.
Nice...maybe something was causing the thermostat to stay stuck open. Maybe nothing torn, just sticking open?
Sure your not driving in California?
Surprised that's not throwing a 0128
No kiddin
Whats going on with the supply chain I want to order a 23 super duty by 4-3 22 to take advantage of 3 grand ford voucher my dealer in South Haven Mich.They have 1 new vehicle in stock for sale how do you dealer guys stay in business?????????? any news
🤷♂️🤷♂️
I heard on the news that Ford was stopping production on the F250 and 350 because of chip shortages.
Wow!
We all know the roads in that state up north are no good.
Hope she's a viewer 😠
@@PowerStrokeTechTalkwARod F that B and I don’t even live there.
The heat is not on.
Do you know anyone who can really help me with my mustang if so could you have them message me plz.
Huh
@@PowerStrokeTechTalkwARod I need a ford mechanic to help me out and I dont if you were just powerstroke or if you did everything I was wanting to see if you knew anyone who could help me figure out what is wrong with my mustang
You will ha e 2 email me.
Nope not so far.