2015 F56 MINI Esys Coding
Вставка
- Опубліковано 16 вер 2024
- I finally made a video for some people that like to watch instead of read through instructions.
This is for base F56 (2015) with Automatic transmission + Sports Package (LED headlight, sport seats, 16" wheels).
I coded the following:
-System complete shut down when engine is off and then I open the door (so you don't have to press OFF twice)
-Lowered the LED Headlight voltage to 12V (I don't know if it does anything though)
-Enable tail lights when daytime running lights are on
-Door handle LED ON when gear in Reverse
-Disabled airconditioner turning on automatically when AutoClimate ON (I like having manual control over this)
-Removed blank display selection on the speedo
In the end I was trying to find the turn signal blink count (to increase it to 5 count) but decided not to do that. (edit: this has a different name now, but ended up being not worth editing it)
After flashing IHKA, the fan won't turn off and the AC will blink. This is because the AC needs to go through a calibration process. Turn engine on, turn on AC, keep it idle for 1 minute. After blinking for 1 minute, it'll all go back to normal.
Bimmerfest forum has a thread where you can get all the files:
www.bimmerfest....
hi i have a 2015 mini coper f56 base model i would like to know how to code for drls to stay on during low beam headlights (night time driving) if possible with bimmer code or bimmer link if not by computer thank you
Hey! Thanks for the video! Do you know if I can code auto transmission to sport auto on my F55 Cooper S using bimmercode app or I would have to use laptop and the software you used?
Hi
Hoon,
thanks for sharing!
The item you mention "Enable tail lights when daytime running lights are on" can you share the code ?
Thank you so much~
Which it had at least subtitles
hi man, good matterial on the video, congratulations. could you please the video with the results on your Mini? would be nice to see how it looks like 👍
Well, it doesn't really change the looks that much. When in Reverse gear, you'll notice the door handle light is on. The LED brightness doesn't seem to have changed, tail lights are always on for safety, I have control over the air conditioner, and there's no blank display on the speedo.
How did you get the correct launcher? I've been emailing TokenMaster every month since last April and no responses. I've posted to his website, nothing.
What do you mean having the correct launcher? I recently reinstalled E-SYS 3.28.1 and E-SYS Launcher Premium 2.6.0.119. Everything works fine. Why would you contact TokenMaster?
On various releases, you had to have a key generated by token master to activate the launcher premium. I haven't tried since July so I'm fuzzy on which version I was using and what the error was. You're apparently saying you used it without any key file or activation code, so I will try it again. Thanks for the link, I'll make sure I'm up to date.
Link doesn't appear to be active. :(
That's not supposed to be a link. It's just a version number and UA-cam automatically formatted it as if it were a link. Here's where you can download stuff: www.bimmerfest.com/forums/showthread.php?t=983244
Hello I have an F56 from 2015 , can you please tell meif you can do that job for my car? the things that I wish is the tire information, the accoustic when lock and Unloking , and the default desactivation for the auto stop/start, Disabled airconditioner turning on automatically when AutoClimate ON, Door handle LED ON when gear in Reverse. I can pay you via paypal. Please HELP. jejejeje
Hey man i finally got everything but i can’t figure it out why esys lanunched from the launcher doesn’t allow me to check the Vin connection... any suggestion?
Check that the ODB port to LAN on your laptop connection is working properly. If you are using a USB-to-Lan adapter because your laptop doesn't have a ethernet jack, make sure the driver is loaded and that it's working properly. If you are using Mac, and loaded Windows in a virtual machine like I have, make sure the LAN device is physically assigned to the Windows guest machine and not the OSX.
Hoon Park how can i check if it’s assigned to the vm?
If the connection is working it should show up automatically. I don't know of any other way to check the ODB to LAN is connected properly. Assuming the ODB-LAN cable is fine, and your car battery is not dead, I would start by checking the laptop's LAN port is working properly.
Hoon Park the cable it’s brand new and i’m using a mac with the vm like you and have a good connection but still don’t know how to check if the cable is physically assigned to the vm instead of osx
Okay. If you are using Parallel Virtual Machine and a USB-to-LAN dongle, when running Windows look for the cog icon at the upper right corner. It opens up more configurations for the current guest OS. In there, you'll see a USB icon. Click that and you should see your USB-to-LAN adapter. Make sure that's checked. That'll physically assign the USB-to-LAN adapter to the guest OS. After that, you might need to install the LAN drivers inside Windows too. If you are not using a USB-to-LAN adapter, you'll probably have to look inside Web icon and change that to Host-Only network.