Excellent demo dr.! I just got my Headrush and you answered all the questions running through my head on output setup. Great job and keep them coming!!!
Thanks for all that you do! This was helpful when improving the tonal quality from XLR-Out to PA or (FOH). I tested the options live; and found that the Cab-Out was best for my PA.
Hi Doc. I made several rigs, some have stock cabs, some use ir's. I use my alt out to a clean Amp+cab for stage volume. Full rig (including cabsim or ir) goes thru XLR to foh. I can either select ir-in or cab-in as my alt output which means that if I select e.g. ir-in while a rig with cabsim is selected the cabsim goes to my real Amp+cab... And vice versa. I solved this by inserting a disabled ir in rigs that use stock cabs. Hope this makes sense and like to hear you opinion.
Great video. Getting my Gigboard today. What's the best way to get a wet/dry configuration? I have two boss katanas and two Tech 21s. Not having the XLR outputs is a bummer.
Marc Pike you would need to have your rig in a parallel configuration and then pan your paths hard left and right so one side is dry and the other side is wet. I will do a video on this. I haven’t messed with other rig configurations.
I have been STRUGGLING with fizzy tone since I got mine. Been through Global EQ over and over... All this time I should have been on rig and cab out. Thanks for clearing this up!
These devices have given players SO many options...but they can also be confusing. In my experience (various Line 6 devices and a Zoom Gn5) if you go out to a powered speaker you will want to feed the full rig to the output as most powered speakers are designed to reproduce full range sound. In fact, I play with a guitarist currently who runs a Line 6 Firehawk FX out to two Alto two way speakers and it sounds fantastic. I have become convinced that full range powered speakers are the way to go for amplifying modelers on stage. Really HD sound. And to those who say these don't cut through a band mix live...I call bull. Tim's rig is plenty loud and easily competes with my drums and our bassist's Mesa Boogie rig.
It does. He has two of them so it's a stereo rig. He turns them back toward himself like wedge monitors and feeds the XLR outs to the FoH. Best guitar sound I have ever heard on stage in my 40+ years of semi-pro playing.
I have the Gigboard and the Global settings are a bit different. Can you advise on the using an external amp and going to the PA(Front of House) using the Gigboard? Thanks for the great information. Love the channel.
There is not an Alt Output option for the Gigboard. You could always use an IR pedal to send out of the Headphones and then use the Main outs to go to an amp with no IR or Cab in the digital chain.
Thanks for sharing. I'm using the HR as interface to record into my DAW Reaper, can I get two signal into the DAW clean and through the chain? I use the USB cable only.
Yes you need to set the input of one of your tracks two the Low Input I think it’s called. Whatever is the input that is not the first two. That will give you the direct signal that you can later Reamp.
Hey Doc, just wanted to say thanks, these videos you have up for the Headrush are priceless, really hope Headrush sort you out, your’re a great ambassador for them. Love my Pedalboard. Do you have any idea when the firmware updates will be compatible with MacOS Catalina?
Hi Doc. Love your channel. Helps out a lot especially when I don’t have a lot of time to mess around with settings! Got a quick question for you. Getting ready for a gig, wondering how I should set my alternate output source. Running Headrush FRFR for my stage sound and 1/4 to XLR to Mackie 2x250 non stereo powered PA for front of house. Any recommendations would be greatly appreciated.
If you are going to an FRFR on Stage and still going to the house then i would use the 1/4 in RIG mode so the front of house still gets the full rig sound. If you were using a real amp on stage then thats when I would use the 1/4 in Alt output mode effectively bypassing the cab/IR.
Gibson Les Paul Classic, amazing how clean the sound is coming into the mix. Definitely have to be turned down lower than the other guitar player who’s miking his tube amp.
Hi, I would like to use my Headrush as follows: the direct XLR output in line and the 1/4 output connected to a Electro Harmonix Magnum 44 Power Amp directly in a 2x12 enclosure ... could you tell me if it is possible to configure the output 1/4 without the enclosure simulation and the xlr output with the simulation ??
Sorry kind of confused on how to set my alternate output - my rig is a Peavey 6505 to it’s own orange cab - I use 4 cable method so I’m using the headrush just for effects - So I need my whole rigs plus an IR to go to the pa through xlr out and that same exact rig to the amp minus the IR our from the amp output of the board .. what would my alternate output settings be ?
Assuming you are using the IR 1024 file size your Alt Output source needs to be set to Input IR 1024. This will send the full signal out of the XLR when the XLR out is set to Rig and pass the full rig minus the IR when 1/4 Out is set to Alt.
Doctor McFarland Studios Thank you ! That works beautifully, I had to add irs at the of each effects rig , making an Ir preset helped with levels .. sounds amazing for how much time I have into it which is only a day with my replacement board (usb died) so I’m looking forward to really dialing it in 🍻 thanks for the video and tips !
Hi, I'm struggling with this a little as well. I'm using my HRPD with 1/4 " (or XLR) out to my FRFR speaker. Currently still using my Boss GT100 to gig with as can't get a decent sound out of the HR. What do I need to set my outputs/inputs to in Global Settings for this set up?. We play small venues and only use PA for vocals so my floorboard and FRFR cab is my backline. Hope you can advise. Many thanks for all your vids so far, really helpul
Neil Morgan you don’t need to worry about global settings. I suggest downloading some of the Artist packs from the HR website (my Artist pack is pretty good). Dial in your amp tones like you would in real life.
@@DoctorMcFarlandStudios Many thanks for your reply. I have the Guns and JB artist packs loaded in already. I dont want to mess with the Global EQ just want to make sure I've got the correct settings. I Currently have it set to Cab Output, is this correct for my set up?
@@DoctorMcFarlandStudios Cheers. I'm using my HR FRFR on stage (I will be), so not using an amp just HRPB connected to my FRFR via left mono out. Working well with my other multi fx unit. I just know the HRPB will soon be my main set up...Just not managed to get things sounding like they should, or, as I hear on some UA-cam videos. Makes me think I must be doing something wrong connections/settings wise. I've downloaded your artist pack btw, will give it a try soon. Thanks again.
So if I use the Headrush live but don’t use a cab or amp, I run straight through to the mixing board and through the mains and my floor monitor, I would set the input at “cab input” and “alt” ?
@@DoctorMcFarlandStudios any idea why my volume on my exp pedal is locked in at 87% on most of my rigs. The volume with the toe all the way down varies from rig to rig but they’re locked mostly between 84-93%. I can’t get 100% of the volume. It’s set at linear on
Hello from Spain. What settings in alternate output i need for.1. sound directly to table mix2. sound to table mix and my real ampli, for use my ampli like monitorI´M FORGET!! THANKS
1/4 output to amp then select ALT, 1/4 or XLR output to FRFR speaker or front of house then choose Rig. Be sure the Cab/ IR is at the end of your chain.
Always? When i connected to speakers too, the cab/IR at the end?. The amp i can put where i want? THAKS FOR YOUR ANSWER, AND SORRY FOR MY HR IGNORANCE!!
Doctor McFarland Studios thanks for the help as for my source should that be specific as in amp or can input/output or will that matter. Thanks in advance
So to be clear. In my situation, I run it into a FRFR Headrush and XLR to FOH. I set it to CAB out and leave the XLR on RIG? ALT OUT to RIG? I also connect into FRFR from Phones out, as per your advice. that is RIG also, to get all the effects? Thanks in advance
Everything is set to rig unless you are using a real amp. You wouldn't want the Cab/IR going to your real amp so therefore you would set the 1/4 out to Alt and the source would be Cab/IR Input. This will bypass the cab in the Headrush but still send the rest of the chain. Keep it simple. Just use the XLR of the HR to FOH and the Phones out to FRFR.
Hi Doc, thanks for the explaination. Can you tell me if its possible to use the HR as a headphone amp? I.e, can I take a feed from an aux send from the mixer and put it into the fx return or aux in and route that to the headphone out without it going to FOH so I can send a full mix to my in ear monitors? I know this is possible in Helix, Im hoping I can do something similar with HR.
Darren Turner I really don’t see why not. I don’t think the aux is routed to the main output or not. I don’t have the HR with me at the moment but I will experiment with it myself.
Darren Turner I had a crack at it last night and the aux signal is sent to the XLR outputs so I don’t suggest trying it for an in ear monitor situation.
@@DoctorMcFarlandStudios No Dr. To the PA. Guitar - HR - Console- I should use 3 channel: 1 Channel - Right 100% WET 2 Channel - Left 100% WET 3 Channel - Cab Output 100% DRY GUITAR SIGNAL Is that possible? Thank you for answering me!
@@DoctorMcFarlandStudios what global settings output wise would you set it to on the headrush when going straight into a Scarlett interface ? Your videos are so helpful by the way. 👍
Hello. I'm new headrush man. I need help to configuration global settings my HR in two situations. 1) HR connected with 1/4 jack to input ampli roland cube 20xl. 2) HR connected with 2 xlr to krk speakers or monitors. CAN YOU HELP ME PLEASE?. I'm lost. My sound is very bad. The loop sound bad, etc THANKS
First you will want to add the FX block into your chain to use the 4CM properly. I guess if you were to use your XLR outs to run to the mixing board you could just set the XLR OUT to RIG. If you are using a real cab then I would have your 1/4 outs set to ALT rig and the output source being the Cab or IR input depending on if you are using a cab or an IR. I did live video on youtube showing how to setup the 4CM with a real amp. I would check that one out as well.
Doctor McFarland Studios thank you for your reply I've been diving in this board for days setting up midi commands and tryin to achieve unity gain between the fx block and the send and return loop on my amp. If I have any more question I'd like to contact you if that's ok I surely do appreciate your help. My name is Chad by the way. Thank you again have a good day
Ok confused, if you set the alternative output signal to "cab input" would not that include the the last few pedals or all the pedals in the chain before the cab? You keep pointing to the top 4 pedals only and not the other two after the amp.
Ok basically how do I keep all my pedals in the chain with my amp? I want the whole rig but no cabinet so I am only using the tone of my 4x12 cab speakers only and not the tone of the cab in the chain, do I just set it to cab input? Im using my 1/4 Line outs not XLR to my rack amp and then to my physicall 4x12 cab.
How do you set one output with all FX & amp to a speaker cab on stage, and have a different output take the same stuff, minus the cab, and add an IR to send to FOH?
that is what I answered in the video. XLR goes to FOH and 1/4 output goes to amp. Set the output source to Cab/IR input and put the Cab/IR at the end of the chain.
If you are using a stock cab then the source needs to be cab, if you are using an IR then the source needs to be IR (1024) or which ever IR type you are using.
@@DoctorMcFarlandStudios in this video you have a cab ..some of your rigs just have an ir...do you have an unassigned amp hidden with the ir going into it and then using "amp output" ? I am using the M10 cap edge IR without a cab but the output source doesn't give me the option to chose IR output..
Excellent demo dr.! I just got my Headrush and you answered all the questions running through my head on output setup. Great job and keep them coming!!!
Excellent!!! I am learning new stuff all the time. When I do I usually make a video :)
Thanks for all that you do! This was helpful when improving the tonal quality from XLR-Out to PA or (FOH). I tested the options live; and found that the Cab-Out was best for my PA.
Hi Doc. I made several rigs, some have stock cabs, some use ir's. I use my alt out to a clean Amp+cab for stage volume. Full rig (including cabsim or ir) goes thru XLR to foh. I can either select ir-in or cab-in as my alt output which means that if I select e.g. ir-in while a rig with cabsim is selected the cabsim goes to my real Amp+cab... And vice versa. I solved this by inserting a disabled ir in rigs that use stock cabs. Hope this makes sense and like to hear you opinion.
sikspek that is a really good work around. Good thinking.
Great video. Getting my Gigboard today. What's the best way to get a wet/dry configuration? I have two boss katanas and two Tech 21s. Not having the XLR outputs is a bummer.
Marc Pike you would need to have your rig in a parallel configuration and then pan your paths hard left and right so one side is dry and the other side is wet. I will do a video on this. I haven’t messed with other rig configurations.
I have been STRUGGLING with fizzy tone since I got mine. Been through Global EQ over and over... All this time I should have been on rig and cab out. Thanks for clearing this up!
Greg Barth what were you trying to do?
These devices have given players SO many options...but they can also be confusing.
In my experience (various Line 6 devices and a Zoom Gn5) if you go out to a powered speaker you will want to feed the full rig to the output as most powered speakers are designed to reproduce full range sound. In fact, I play with a guitarist currently who runs a Line 6 Firehawk FX out to two Alto two way speakers and it sounds fantastic. I have become convinced that full range powered speakers are the way to go for amplifying modelers on stage. Really HD sound. And to those who say these don't cut through a band mix live...I call bull. Tim's rig is plenty loud and easily competes with my drums and our bassist's Mesa Boogie rig.
Yep, FRFR speakers sound great and are an excellent option. Im sure in the full band mix it sounds fantastic.
It does. He has two of them so it's a stereo rig. He turns them back toward himself like wedge monitors and feeds the XLR outs to the FoH. Best guitar sound I have ever heard on stage in my 40+ years of semi-pro playing.
I have the Gigboard and the Global settings are a bit different. Can you advise on the using an external amp and going to the PA(Front of House) using the Gigboard? Thanks for the great information. Love the channel.
There is not an Alt Output option for the Gigboard. You could always use an IR pedal to send out of the Headphones and then use the Main outs to go to an amp with no IR or Cab in the digital chain.
Thanks for sharing.
I'm using the HR as interface to record into my DAW Reaper, can I get two signal into the DAW clean and through the chain? I use the USB cable only.
Yes you need to set the input of one of your tracks two the Low Input I think it’s called. Whatever is the input that is not the first two. That will give you the direct signal that you can later Reamp.
Hey Doc, just wanted to say thanks, these videos you have up for the Headrush are priceless, really hope Headrush sort you out, your’re a great ambassador for them. Love my Pedalboard. Do you have any idea when the firmware updates will be compatible with MacOS Catalina?
Donjuanthesecond thanks for watching. I don’t get news on updates but I’m sure they are working on something.
Awesome, very helpful! Cheers mate
Hi Doc. Love your channel. Helps out a lot especially when I don’t have a lot of time to mess around with settings! Got a quick question for you. Getting ready for a gig, wondering how I should set my alternate output source. Running Headrush FRFR for my stage sound and 1/4 to XLR to Mackie 2x250 non stereo powered PA for front of house. Any recommendations would be greatly appreciated.
If you are going to an FRFR on Stage and still going to the house then i would use the 1/4 in RIG mode so the front of house still gets the full rig sound. If you were using a real amp on stage then thats when I would use the 1/4 in Alt output mode effectively bypassing the cab/IR.
Thank you so much. Had rehearsal today and it sounded great!
Glad to hear it. What guitar are you using?
Gibson Les Paul Classic, amazing how clean the sound is coming into the mix. Definitely have to be turned down lower than the other guitar player who’s miking his tube amp.
Hi, I would like to use my Headrush as follows: the direct XLR output in line and the 1/4 output connected to a Electro Harmonix Magnum 44 Power Amp directly in a 2x12 enclosure ... could you tell me if it is possible to configure the output 1/4 without the enclosure simulation and the xlr output with the simulation ??
Eraldo Santorsula yep, just follow the steps in the video and you will be set.
Does the headrush gigboard offer the same functionality?
Sorry kind of confused on how to set my alternate output - my rig is a Peavey 6505 to it’s own orange cab - I use 4 cable method so I’m using the headrush just for effects - So I need my whole rigs plus an IR to go to the pa through xlr out and that same exact rig to the amp minus the IR our from the amp output of the board .. what would my alternate output settings be ?
Assuming you are using the IR 1024 file size your Alt Output source needs to be set to Input IR 1024. This will send the full signal out of the XLR when the XLR out is set to Rig and pass the full rig minus the IR when 1/4 Out is set to Alt.
Doctor McFarland Studios Thank you ! That works beautifully, I had to add irs at the of each effects rig , making an Ir preset helped with levels .. sounds amazing for how much time I have into it which is only a day with my replacement board (usb died) so I’m looking forward to really dialing it in 🍻 thanks for the video and tips !
Can you change the output source with different scenes?? So I could stomp a button and change my output source?
No, this is done globally
Hi, I'm struggling with this a little as well. I'm using my HRPD with 1/4 " (or XLR) out to my FRFR speaker. Currently still using my Boss GT100 to gig with as can't get a decent sound out of the HR. What do I need to set my outputs/inputs to in Global Settings for this set up?. We play small venues and only use PA for vocals so my floorboard and FRFR cab is my backline. Hope you can advise. Many thanks for all your vids so far, really helpul
Neil Morgan you don’t need to worry about global settings. I suggest downloading some of the Artist packs from the HR website (my Artist pack is pretty good). Dial in your amp tones like you would in real life.
@@DoctorMcFarlandStudios Many thanks for your reply. I have the Guns and JB artist packs loaded in already. I dont want to mess with the Global EQ just want to make sure I've got the correct settings. I Currently have it set to Cab Output, is this correct for my set up?
Neil Morgan well if you are using the FX RETURN of your amp then you need to put the cab last in the chain and set the Alt source to cab input.
@@DoctorMcFarlandStudios Cheers. I'm using my HR FRFR on stage (I will be), so not using an amp just HRPB connected to my FRFR via left mono out. Working well with my other multi fx unit. I just know the HRPB will soon be my main set up...Just not managed to get things sounding like they should, or, as I hear on some UA-cam videos. Makes me think I must be doing something wrong connections/settings wise. I've downloaded your artist pack btw, will give it a try soon. Thanks again.
So if I use the Headrush live but don’t use a cab or amp, I run straight through to the mixing board and through the mains and my floor monitor, I would set the input at “cab input” and “alt” ?
No just set the 1/4 out to Rig or just use the XLR outputs.
@@DoctorMcFarlandStudios any idea why my volume on my exp pedal is locked in at 87% on most of my rigs. The volume with the toe all the way down varies from rig to rig but they’re locked mostly between 84-93%. I can’t get 100% of the volume. It’s set at linear on
Hello from Spain. What settings in alternate output i need for.1. sound directly to table mix2. sound to table mix and my real ampli, for use my ampli like monitorI´M FORGET!! THANKS
jcaryali well if you are using the stock cab the use the Can Input under Source. If you are using an IR then use IR Input as source.
NICE!
when i select ALT or RIG in the alternate output (source, etc)? thanks
1/4 output to amp then select ALT, 1/4 or XLR output to FRFR speaker or front of house then choose Rig. Be sure the Cab/ IR is at the end of your chain.
Always? When i connected to speakers too, the cab/IR at the end?. The amp i can put where i want? THAKS FOR YOUR ANSWER, AND SORRY FOR MY HR IGNORANCE!!
What would you set the output to if your amp and cab were after your drives but before your effects only using the xlr out to front of house
If you are going to FOH then you always want to send the full Rig. Only use Alt if you want to send a separate signal to an amp.
Doctor McFarland Studios thanks for the help as for my source should that be specific as in amp or can input/output or will that matter. Thanks in advance
So to be clear. In my situation, I run it into a FRFR Headrush and XLR to FOH. I set it to CAB out and leave the XLR on RIG? ALT OUT to RIG? I also connect into FRFR from Phones out, as per your advice. that is RIG also, to get all the effects? Thanks in advance
Everything is set to rig unless you are using a real amp. You wouldn't want the Cab/IR going to your real amp so therefore you would set the 1/4 out to Alt and the source would be Cab/IR Input. This will bypass the cab in the Headrush but still send the rest of the chain. Keep it simple. Just use the XLR of the HR to FOH and the Phones out to FRFR.
Doctor McFarland Studios you’re awesome bro! My FRFR was sounding weird. Made changes and boom!
Eman Bass yeah your description of the setup didn’t make sense. Glad you got it figured out.
Doctor McFarland Studios person I got it from had it set to amp out and it wasn’t sounding right. Until I saw this video. Thanks again
Hi Doc, thanks for the explaination. Can you tell me if its possible to use the HR as a headphone amp? I.e, can I take a feed from an aux send from the mixer and put it into the fx return or aux in and route that to the headphone out without it going to FOH so I can send a full mix to my in ear monitors? I know this is possible in Helix, Im hoping I can do something similar with HR.
Darren Turner I really don’t see why not. I don’t think the aux is routed to the main output or not. I don’t have the HR with me at the moment but I will experiment with it myself.
Doctor McFarland Studios thanks, I'll wait for your results. I guess I'll try it myself too, lol.
Darren Turner I had a crack at it last night and the aux signal is sent to the XLR outputs so I don’t suggest trying it for an in ear monitor situation.
Doctor McFarland Studios oh, that's a bummer. Maybe they can offer the ability to route the aux in signal in a firmware update. Thanks for trying :)
I just want to use the pedals fx. I have a great sounding tube amp so i dont need the amp modeling from the unit. is the possible?
Yes, I have a video going over a FX Only rig.
Hi! How can i configure the HR like wet/dry/wet? I'll go direct to the console.
Will you be using a real amp or FRFR speakers? I plan on doing a video about this kind of setup.
@@DoctorMcFarlandStudios No Dr. To the PA. Guitar - HR - Console- I should use 3 channel:
1 Channel - Right 100% WET
2 Channel - Left 100% WET
3 Channel - Cab Output 100% DRY GUITAR SIGNAL
Is that possible? Thank you for answering me!
So bro how could I get it to work with my focusrite interface?
I use the 1/4 or XLR out of my Headrush into two channels on my interface for stereo recording.
@@DoctorMcFarlandStudios what global settings output wise would you set it to on the headrush when going straight into a Scarlett interface ?
Your videos are so helpful by the way. 👍
Hello. I'm new headrush man. I need help to configuration global settings my HR in two situations. 1) HR connected with 1/4 jack to input ampli roland cube 20xl. 2) HR connected with 2 xlr to krk speakers or monitors. CAN YOU HELP ME PLEASE?. I'm lost. My sound is very bad. The loop sound bad, etc THANKS
Could you by chance tell me what out put source I'd need to turn on running a 4cable method with my amp head and cab
First you will want to add the FX block into your chain to use the 4CM properly. I guess if you were to use your XLR outs to run to the mixing board you could just set the XLR OUT to RIG. If you are using a real cab then I would have your 1/4 outs set to ALT rig and the output source being the Cab or IR input depending on if you are using a cab or an IR. I did live video on youtube showing how to setup the 4CM with a real amp. I would check that one out as well.
Doctor McFarland Studios thank you for your reply I've been diving in this board for days setting up midi commands and tryin to achieve unity gain between the fx block and the send and return loop on my amp. If I have any more question I'd like to contact you if that's ok I surely do appreciate your help. My name is Chad by the way. Thank you again have a good day
Reach out any time. Keep rockin
When something is set in Global does it change from preset to preset or is it a set it and forget it thing?
Global is set and forget. I used stock cabs for awhile but now I am back to using IRs. I just get my Alt Output Source to IR 1024 In.
Ok confused, if you set the alternative output signal to "cab input" would not that include the the last few pedals or all the pedals in the chain before the cab? You keep pointing to the top 4 pedals only and not the other two after the amp.
When I point to the top 4 pedals I am not referencing the signal after the amp output but only the chain up until the amp input.
Ok basically how do I keep all my pedals in the chain with my amp? I want the whole rig but no cabinet so I am only using the tone of my 4x12 cab speakers only and not the tone of the cab in the chain, do I just set it to cab input? Im using my 1/4 Line outs not XLR to my rack amp and then to my physicall 4x12 cab.
Yep. Set the Alt source to Cab input and that will include everything else in the chain.
Thanks!
I only want good sound. I had very efforts to buy HR and i don´t achievement. THANKS A LOT
Question do you need a direct box to connect to the mixer or you just go straight connected from output XLR...?
XLR out is all I use. The sound guy will know what to do.
How do you set one output with all FX & amp to a speaker cab on stage, and have a different output take the same stuff, minus the cab, and add an IR to send to FOH?
that is what I answered in the video. XLR goes to FOH and 1/4 output goes to amp. Set the output source to Cab/IR input and put the Cab/IR at the end of the chain.
@@DoctorMcFarlandStudios I meant to specify for MX5. Doesn't have XLR, but maybe you can split the two 1/4 outputs the same way?
@@sbrave You can't use the Alt output method for the Gigboard and MX5 since they don't have separate output optoins.
I ned help with Dyn Delay, can I contact you?
Mitch Glider sure anytime. I will try to help.
still need help?
And in SOURCE cab output in both type?. I have so many questions because i don´t understand english very well. SORRY
If you are using a stock cab then the source needs to be cab, if you are using an IR then the source needs to be IR (1024) or which ever IR type you are using.
What if you use a ir in lieu of a cab? I dont se an "ir output".
Jeff Nobles the IR is being sent to the XLR output in this example.
@@DoctorMcFarlandStudios so "amp output" would be the same as "ir output" , when an ir is used instead of a cab?
@@DoctorMcFarlandStudios in this video you have a cab ..some of your rigs just have an ir...do you have an unassigned amp hidden with the ir going into it and then using "amp output" ?
I am using the M10 cap edge IR without a cab but the output source doesn't give me the option to chose IR output..
That should read Cab output not amp output.
Jeff Nobles output source I set to IR 1024 In