2019 - 2023 Mercedes Benz Sprinter Passenger Van 2500 3.0 VS30 - Replacing Front Brake Pads & Rotors

Поділитися
Вставка
  • Опубліковано 14 жов 2024
  • amzn.to/3T7sUQQ - Front Ceramic Disc Brake Pad Set Compatible with Freightliner Mercedes Sprinter Van
    amzn.to/3uKioVJ - BOSCH 16011499 QuietCast Premium Disc Brake Rotor - Compatible With Select Dodge Sprinter 2500/3500; Freightliner Sprinter 2500/3500; Mercedes-Benz Sprinter 2500/3500; FRONT - Single
    amzn.to/4a2SOve - Power Stop Front and Rear KOE8660 Stock Replacement Brake Pad and Rotor Kit Autospecialty
    amzn.to/49jtwJ9 Power Stop CRK7690 Coated Rotor Front Brake Kit Coated Brake Rotors & Z17 Ceramic Brake Pads
    amzn.to/3GnzoDQ - Front OR Rear Disc Brake Pad Wear Sensor Compatible With Mercedes-Benz Sprinter 2500 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 PC-297481
    amzn.to/4954WeA - Milwaukee 2767-20 M18 FUEL High Torque 1/2" Impact Wrench with Friction Ring
    amzn.to/406CUv9 - BIG RED T43202 Torin Heavy Duty Steel Jack Stands: 3 Ton
    amzn.to/4a36ZQP - Mayhew Tools 60141 Dominator Screwdriver Pry Bar, 12" Straight
    amzn.to/3NbSnF0 - Mayhew Steel Products, Inc. 3 PC Dominator Demo Driver Set
    amzn.to/3GnAAXQ - LEXIVON Master HEX Bit Socket Set, Premium S2 Alloy Steel | Complete 32-Piece, SAE and Metric Set
    My Ratchet and Quick Spinner shown in the video: Ko-ken 3726ZB kokenusa.com/d...
    amzn.to/3uO7HkN - LEXIVON Torx Bit Socket Set, Premium S2 Alloy Steel | 13-Piece Star T8 - T60 Set
    amzn.to/3FoBym2 - MILWAUKEE'S Mid-Torque Impact Wrench, 3/8",Cordless
    amzn.to/47GjRe7 - TEKTON 3/8 Inch Drive Impact Universal Joint | SIA12102
    amzn.to/4a1Xd1o - Capri Tools 3/8 in. Drive Semi-Deep Impact Sockets Set, Metric, 8 to 22 mm, 15-Piece
    amzn.to/3DBkAOx - Rotor Remover 9000 (a.k.a. Small sledgehammer)
    amzn.to/45F0Qac - Mission Automotive [2 Pack] Brake Caliper Hooks/Brake Caliper Hangers - Excellent Hook/Hanger for Automotive Tool Use
    amzn.to/3Lg5Xqg - Brass Wire Wheel Brush Kit for Drill
    amzn.to/47JRNqn - Steel Wire Brush Kit for Drill
    amzn.to/3QnzEc4 - CRC Brakleen
    amzn.to/3ZcxkFZ - Permatex 80078 Anti-Seize Lubricant
    amzn.to/3KrWMmH - Versachem 26080 Synthetic Caliper Grease
    amzn.to/3RV6tO9 - Permatex 24200 6 Pack 6ml Threadlocker, Blue
    amzn.to/46TaVlz - Permatex 80653 Silicone Extreme Brake Parts Lubricant, 8 fl. oz.
    amzn.to/47Gkp3F - TEKTON 1/2 Inch Drive Micrometer Torque Wrench (25-250 ft.-lb.) | 24340
    amzn.to/2VQD4qA - GearWrench 3/8" drive torque wrench 10-100 ft. lbs 85062
    Just a quick video showing how I replaced the Front Brake Pads & Rotors on a 2019 Mercedes Benz Sprinter Passenger Van. This is the same for newer models as well. This is also a RWD model with the 3.0L Diesel Engine. The brake pad wear sensor was only on the front passenger side and rear driver side on this van. The parts that we used were from our local O'reilly Automotive and came with two sensors included.
    The Torque Specs that I found online:
    Caliper Bracket Bolts 127 ft. lbs
    Caliper Slide Pin and slide pin bolt 25 ft. lbs
    Please verify these specifications with your manual.
    Tools needed:
    Small Prybar or Caliper Compression tool or C-clamp
    6mm allen wrench
    T-30 Torx bit
    21mm Socket and/or breaker bar
    Brake grease
    Torque Wrench
    Here's the link to the video on the Rear Pads & Rotor Replacement for this same van:
    • 2019 - 2023 Mercedes B...
    Thanks for Watching!
    Please Subscribe!
    www.danthefixitman.org
    www.amazon.com/shop/danthefixitman
    Song used in the video:
    'Sam the Man' by Mini Vandals
    This video is intended for entertainment and informational purposes only. Any repairs you make are your responsibility. I am not liable for any damages to you or your vehicle or your property.
    As an Amazon Associate I earn from qualifying purchases.

КОМЕНТАРІ • 3

  • @twowheelsonly75
    @twowheelsonly75 Місяць тому +1

    Last Week Rear. This Week Fronts. Great Video. I have done my own brakes on many vehicles for years. It's nice to go thru the steps and parts before starting to make sure to have the tools and torque specs.

  • @HappyPlants123
    @HappyPlants123 3 місяці тому +1

    This is very well done, thank you for all the various tips, I’m a first timer

    • @DantheFixitMan
      @DantheFixitMan  3 місяці тому

      You’re welcome, best of luck with it.
      Take care,
      -Dan