How to make a box with wooden hinges only with a table saw
Вставка
- Опубліковано 21 сер 2024
- All you need to make a box with wood hinges is a table saw and of course a little bit of sanding. But you don't need a drill, a scroll saw, a router, a chisel or a dado stack. In this video I show you how you can make wooden hinges with my super simple single blade box joint jig. • Wie stellt man Fingerz...
If you have any questions please write it in the comment section. I will answer every single one.
If you like this video please give it a thumbs up, if not please give it a thumbs down and let me know whats wrong, in the comment section.
--
* NEW VIDEOS *
I publish a new video every Friday. If you want to be informed click the subscribe button and then this little bell. It is free and you can unsubscribe every time you want.
--
* BECOME A PATREON *
Do you like my videos?
Now you can support me on Patreon. I really appreciate it.
/ stephanpoehnlein
--
* MUSIC IN THIS VIDEO*
Britches Full of Stitches. Munster Bank. Bill Sullivan's (The A Polkas)
Artist: Sláinte
Album: Cup of Tea
URL: freemusicarchiv...
Copyright: Attribution-Share Alike 3.0 United States: creativecommons...
Bill Cheathum
Shake That Little Foot
URL: freemusicarchiv...
Copyright: Attribution-NonCommercial-ShareAlike: creativecommons...
Over the Waterfall
Shake That Little Foot
URL: freemusicarchiv...
Copyright: Attribution-NonCommercial-ShareAlike: creativecommons... #DIYJIG #Vorrichtung #selbermachen - Навчання та стиль
If you like the video, I would be very happy if you would share it wherever it makes sense. (blogs,forums, websites). That would really be a great help.😉
Furthermore you can support me in the production of my videos
either on Patreon: www.patreon.com/stephanpoehnlein 😊
or directly via Paypal: www.paypal.me/stephanPoe 😊
Love the box, love the music, LOVE the height gauge!!! Very nice tool. Very nice box. Well done.
Without any doubt, the best woodworking video I've seen in a long while. Teriffic idea. I'm going to use this technique for the wooden hinge on a gate leg table with a folding leaf and swing out leg. Thanks for sharing.
Thank you for you comment, Tom!
I've been turning magic wands and now the young magician asked me to make boxes to them. This looks like a nice desing that I'll try to use.
Great video, with music to suit inspired work ! Faced with a need, I made one search for Wooden hinges; first clik THIS ! INSPIRED ! That same night I drew an 180 offset version, and the next day I made it in red oak with a mahogany keeper. Thank you Stephan !
So simple and nice looking. I hate usual metal hinges and necessarily will steal this idea! Thank you Stephan!
I never thought I will ever say these words: "I am really happy if you steal it!" :)
Heh! I will steal but only with remark about author!)
you only steal with your internal body cam and to be on the safe side, it's stored on the body's own hard drive.
I was fascinated with how you "drilled" the long hole accurately for the concealed wire👍in both parts. Very clever way to do that, and hope I can remember for the future sometime.
Thank you for your comment!
I did not see the "drilling of the long hole". Did I miss something?
@@robira1313, at 1:18 he shows a hinge pin in a channel and a strip of wood filling the gap behind the pin. It is not drilled but a perfect hinge channel being made with the table saw. It's brilliant.
That little box was gorgeous and the hinge really set it off. That plain clear finish was the cherry on top! My wife would love a little box like that. You did a fantastic build. Simple, yet elegant! Awesome, just awesome.
Thank you 😊
I do Stephan. I've used the Incra wooden hinge template for years and it does make beautiful precision hinges. But your technique incorporates the hinge into the very carcass of the box itself. I may change up a few things..........like letting the lid overlap the front a bit to create an easy lift lid. But I will definitely use this method on my next hinged box.
FWIW, I will be sure to send the credit your way. Thanks again.
I'll have to say that's the first time i've seen that technique used to make box joints! Too much math for me, I just make em with a jig and index key. Great video and brilliant problem solving skills!
Je vais me coucher moins bête ce soir mais la tête pleine d'admiration pour la maitrise de l'artiste
merci cette vidéo est sublime et surtout à voir et revoir
Amitiés DB
Very, very clever way to make a hinge. The hinge pin hole is always the difficult part. This technique solves that. Like others, I'm stealing this idea. Thanks for posting.
I am glad you like it :)
Behind simple works, there's always big and clever ideas. My respects from the Caribbean Shore of PR.
Thank you!
You are welcome. Blessings for you and your family as well. Deeply appreciate your kind reply.
Now I really have to make the box joint set of spacers, this is brilliant and would be a great gift box for small gift, a gift within a gift...:). Cat was very well behaved today. Thanks for sharing!
Thank you for your comment!
Wow. I saw many interesting ideas, thanks. The hinge kingpin was a surprice. I have been wondering how to do that. And the dovelling system was nice too. The blade height measurement tool was ingenious! Moreover thanks for the music which I was able to listen unlike 99.9% of the UA-cam videos.
Thank you 😊
Very clever way to make the hinge! Definitely something to try!
Going to try this very soon. One thing I plan to use a stainless steel spoke from an old bicycle wheel. 2 mm is standard and cheap.thanks for the great idea.
Intresting miter gate you got.Love it.
I had seen another person drill a hole for his. I was wondering how he could insure accuracy, since he basically free hand it with an electric drill.
I, rellally like your solution much better. It is quick amd very simple to do.
Thank you for sharing amd teaching us this method.
The guy can work. Fantastic !
Tja, so einfach kann es gehen. Klasse Video !
What an amazing technique. Simple yet so practical. Very enjoyable video.
Thank you :-)
Stephan wirklich clever gelöst mit diesem Langloch ... so schnell kann man sich ein Holzscharnier selbst bauen
lg Rene
Danke Rene für deinen Kommentar!
I like very much your videos. Thank for share it.
thanks for the video, really good way to hinge a box.
Great box. I love the idea of wooden hinges .
Thank you 😊
What a a nice hinge application. Thank you for explaining it.
Thank you for your comment.
Very ingenious hinges!
Thank you Mikel!
Wow! Its awesome the great wonderful wooden box!
Love it♥
That's fantastic! I need a birthday present for next week. I need to get started.
Thank you and good luck!
This is a really good idea. Thank you for the video. It was very helpful
very nice idea for the hinge thank you *o*
Thank you!
You have the one missing step I didn't have.. Thanks
Thanks for your comment
Now that is brilliant!
Thank you James!
Absolut Spitze , ich bin begeistert.
Super Arbeit. Macht richtig Spaß zu zusehen. Es juckt in den Fingern.😊 Jetzt muß es nur noch wärmer werden. Im Moment ist es unmöglich es in der Garage zu machen. Zu kalt . Es ist fast schlimmer als wenn die Kinder auf den Weihnachtsmann warten .😉
Aber die Zeit kommt bestimmt.
Gruß Ingo
Freut mich sehr, das es Dir gefällt 😉
BRILLIANT!!! Thanks for information.
Thank you for your comment.
whoops, @ 2:10, thats not a tablesaw! Just jokin'! great vid. Sometimes harder with a tablesaw than with hand tools!! Also, great to see cam clamps!! I just noticed that great sanding block look alike!
Great idea, sir, thnx for uploading, I m amazed
Klasse, so einfach - wenn man weiß, wie es geht. Danke für's Zeigen.
Freut mich wenn's gefällt.
Nice work!
So simple .... once you've seen how. Will definitely have to have a go at this. Thanks :)
Thank you for your comment Simon.
You're a real craftsmen, thanks for sharing... Music was good too!
Thank you!
AND I love the Kitty Cat perch you have there so your cat can keep an eye on you! Funny!
:-)
Wow! So clever and so simple! 👍
Thank you!
Great vid, love the NO TALK that angers so many, and I play clawhammer banjo .....
nice work.simple and clever
Thank you!
Wooow great box congratulations
Thank you :)
thank you so much, sir. Your work is amazing and your willingness to help others is greater than your work if that is possible...be well...Jim
thank you .You make it look super easy:) absolutely beautiful box and hinges.
Thank you very much!
Stephan Pöhnlein i should thank you for sharing this great idea:) im sure we all are waiting for the video on making those blocks :-),
Coming soon!
I like your solution for getting the long hole for the rod. I tried unsuccessfully to drill into the fingers with a long bit but gave up and "cheated" by only drilling the outer three at each end and pinning them. I considered that this would be a strong enough hinge.
Neat little box. Well done 😊 Thank you ॐ
Thank you!
Love those hinges. I at first i was wondering 'How did he drill all the way through like that?' Great job!
One question, you created the finger joints then rounded them on a belt sander, would it work as well if you rounded them on a router then created the fingers? I know the focus of the video was only with a table saw, but I am new to wood working and thinking of different skills as I watch and learn.
Of course, you can also use a router but for such a small box it is a overkill. It really works great if you sand it round by hand.
Very clever idea, must have a go trying it out 👌
looking well ,,love to try one ,,
Thank you pieter for your comment!
Gute Idee, werde ich mir merken.
Dankeschön!
Great Video! Great project! I think I will have to make some hinges now:) Thanks for making this.
Thanks for your comment
Спасибо за мастер класс. 👍
Wow. Very nice.
Thanks
MUITO BOM, PARABÉNS!!!!
I SEE YOU HAVE A QUALITY INSPECTOR IN THE SHOP. LOL
Very nice
Sehr gut Danke
Now that's clever.
....and I'm afraid I'm going to steal it too !!! (there's no shame on here, is there?)
Thank you Stewart.
:D Very clever Stephan, Nice work and thanx for sharing!
Thank you!
Man that is awesome and I love the music thank you for sharing.
Thank you :)
very ingenious mate. looking forward to seeing more of your work. thanks so much for sharing.
Thank you for your comment
Hrmmm back a board out of a table saw - ya that sounds like a good idea.
Well done
nice work.simple and clever.TU
Thanks!
GREAT, I am subscribed
Thank you and welcome to my channel :)
That is cool!
Thank you Willem!
Great video I’m going to try this! Quick question what was the depth you cut the dado to?
How about that! I just might try this but, I dunno. I am simply not in your league. You, sir, are highly skilled. UA-cam videos don't often impress me but this one did. Subscribed - just because you're fun to watch.
Thank you very much for your nice comment.
Love the saw blade height gauge - is there a video for that?
Mega likaso
Nice
Stephan, this is truly very clever, at what depth did you run the slot for the wire? was it like half way up the finger joints or something? very curious as i want to use your idea
Thank you, yes the depth is a half finger + the thickness of the rod
Hallöle!✌😄Allein die Musik ist der Knaller!👌🎊🎉👍Die Schachtel ist echt gut....und am besten find ich das man die Stange nicht sieht...ähm...du weißt ja bestimmt wat ich meine!😄👌Falls es die noch gibt die Schachtel....nehmen wir sie gerne!😍😃FETTE GRÜßE VON UNS BEEDEN!✌😊😍
Freut mich sehr, dass euch meine Videos gefallen. Die Schachtel gibts leider nicht mehr aber vielleicht gibt es demnächst eine andere, mal sehen. LG
@ Das wäre auf jeden Fall sehr stark....und ich(Max) bin dann zur richtigen Zeit am Start...wenn das neue Kästchen in Arbeit ist!😉👍✌
Nice cat
interesting video. Thanks for posting, but had to run on silent after about 45 seconds as the music got old really quickly!
I have watched your box finger jig using a single blade and would love to know how you made it. Do you have plans?
Sorry I have no plans but here is another video in German ua-cam.com/video/MX8bKZ3YBqc/v-deo.html maybe it helps.
Hab mir das Video noch einmal angesehen. Dabei ist mir am Ende der Schleifmittel aufgefallen.👌Dieser ist doch sicher auch selbst hergestellt,so wie er aussieht. Gibt es davon ein Video ???
Gruß Ingo
Ja, gibt es hier :ua-cam.com/video/qGRspK8RtVg/v-deo.html&index=7&list=PLMgLB9DSu_X-tEZvt0Kev8SyEn1Tz_3xD
brilliant!
Thank you!
No thank you. I'm getting ready to build a wine gift box and have been struggling with an idea for its lid. It's supposed to have some rustic flair. I think this type of lid will be perfect!
This nice bro, tnx for sharing it with the world!! (New suscriber here) 😀👍🏻👌🏻👊🏻🗜📐🛠
Nice cat.
Amazing box will be using the idea to make boxes to hold dial calipers for my metalwork teacher at the end of the year. By the way, what is that amazing music you have playing through the video?
Thank you! Information about the music is in the description :)
Do you have any plans for the table saw height gage ? Love your videos. Give Moritz a hug !
Thank you! Here is a video about this height gauge: ua-cam.com/video/-aOCc7StPlI/v-deo.html
If you have more questions, please ask again.
It would have looked a lot better if the other pieces of the box were finger jointed!!
Love your box. But music??
great video. I am going to try this. Could you please tell how deep and width of the groove as well as the size of the rod? Thank you.
man....Du gibst ja Gas in letzter Zeit. Ich komme ja gar nicht mehr hinterher und eine Idee besser als die andere.
Vielen Dank Peter, bis auf weiteres gibt es jetzt zusätzlich zu den Freitagsvideos auch eins am Dienstag.
Nice video, nice box :-)
Thank you!
Very interesting this I must try really like the way you made box hinge. By the way what was the m.usic
Thank you. You find all information about the music in the video description.
cool music!
thanks!
Mega kann man echt ewig zu sehen! Aber hast halt schon auch mega Pro-Tool am Start. Ich müsste von Hand sägen und feilen bzw schleifen :D PEAZE DeO
Vielen Dank, Handarbeit kann auch Spaß machen sieh Dir mal diesen Kanal an ua-cam.com/channels/KqedAub4fQCzHhhL5Kxo8w.html
Stephan Pöhnlein Mach ich doch gleich! Danke
CleverFello ................. JRW
Nice. But you should of put cat treats in it... 👍
I see you have your cat supervising :)
It's called a CAT-SCAN! Lol
Interesting method of finger/box jointing; your own idea of the spacers to advance the blade? Or where did you find it?
How do you determine the DEPTH for your rod slot? Do you find PINE holds up well enough, or is hardwood necessary for hinges on frequently opened boxes?
Thank you for your comment Mark. Yes the spacers are my idea, but maybe it is not new. Here is a video about this Method: ua-cam.com/video/kbgnnsilyxM/v-deo.html. The depth of the rod slot is the half of the thickness of the board plus the thickness of the rod. For small boxes, pine works fine :)
I didn't see it clearly shown, but to keep the rod from the bottom of the slot you used a thin sliver of wood about half the thickness of the board and the same width of the slot that was glued into the slot in both pieces, then the rod was placed on top( temporarily ) of that and another sliver of wood was used to fill up the difference which was sanded down to flush...is this correct? I'm assuming this is so since the rod cannot be at the bottom. I really like this way...it looks so much more elegant and it's all wood. I have started making some small jewelry boxes and other types of small storage boxes with the box joints and having this jointed top will look great with the rest of the box jointed. Oh, I live here in in U.S.A. so I have a dado set that I use for my box joints...sure makes it easy. Thank you very much for sharing this with us, I really appreciate it.
I don't follow you here abotu the sliver of wood; have to re-watch it, but a wooden dowel is plenty strong, so metal rod isn't necessary. Separate individual wooden knuckle joint hinges, using long grain cuts (vs. short grain here) are sufficiently strong too, though a totally different approach. This one-piece (back & hinge unit) is unique.
Thank you for your comment. I don't know if it was all clear. so here is a short explanation:
First I made the slot with my table saw, then I put the rod, which has the same thickness as my table saw blade, in the slot, Then I glued the sliver, which has also the same thickness as my table saw blade in, to close the gap and sanded it down. I hope this helps.
Stephan Pöhnlein oh, the thin strip for the filler you mean, I understood that. I thought the other comment was suggesting some other sliver that I never noticed underneath the rod verses on top of it. I think I follow everything here. Great job.