Surron Segway Battery Bypass Green Line Engineeering

how to bypass your Segway or Suron 60v battery.
Get our Big Power Controller Plug and Play kit at www.glengineering.co
#Sur-Ron
#Surron
#Segway x260
#Segway
#Segway x160
#Bac4000
#Bac8000

[@AustinLagerberg]

Thanks, this is really helpful

[@chrisstuff2181]

Great video! What gauge wire is used in the bypass kit though?

[@permanentlypatriotic]

I have a bypass kit from GLE and can confirm it's 12AWG

[@wakbordr]

Is there a video like this for the Talaria bypass GLE sent me?

[@geheimgeheimer1907]

What is low voltage? I have the torp controller and 51volt low limit?

[@Colesome]

What is the low voltage point we should pay attention to? I've seen both 52v and 45v mentioned as the low voltage cutoff.

[@GLE]

48

[@tanohuizar]

Will there be any benefit in power or speed to make this modification on my x260 with the stock controller in place. Great info.

[@GLE]

There is no benefit unless you are purchasing our controller

[@danielw1750]

@@GLE would it still be safe to run without a voltage meter

[@Speedyfrank55]

Hi there, what would be the max kw/power setting i can use with the controller and the bypassed battery? I hear some guys saying 7kw and others running 8.5 kw? Thanks

[@GLE]

7kw for bypass

[@Speedyfrank55]

@@GLE thanks!

[@HKnK8]

Will I lose some range if I bypass the battery+bac4k? Compared to stock battery+bac4k?

[@GLE]

No, the controller is more efficient.

[@marner3085]

My battery looks nothing like the one in this video so what exactly is the right way to do a bypass bcuz I did it exactly how I figured would be even tho my battery looks different and now I’m getting no throttle everything else has power just no throttle and prior to doing the bypass everything worked perfectly

[@GLE]

A bypass has nothing to do with throttle. Check your real time throttle voltage or contact support

[@marner3085]

@@GLE what about my battery looking nothing like the one in the video ?

[@GLE]

@@marner3085 it’s all one bus bar underneath the three screws no matter what your battery looks like. Simply attach the phase wires on any two screws

[@Gassten]

My battery looks diffrent inside , it has 3 screws to mount on. Does it matter what ones to put the cable on?

[@GLE]

Just screw to both ends. It’s all one single bus bar underneath.

[@F-ronster]

I have the new 40 Ah (2023) model and looking to bypass it, Q1 is the battery used here the 2022 or 23 model? Q2 does the 40 Ah allow me to draw more kw ?

[@GLE]

Max power for that battery is 7500 watts

[@nomzig]

Sir I still not received my kit

[@stevenwalker1375]

What’s safe amps to push with bypassed battery 110a or can I push 120a?

[@joshuab2450]

105 amps

[@stevenwalker1375]

@@joshuab2450 that it a lot say more

[@joegua5228]

I see other kits with 3 wires and your with 2 wires is there a reason or it just don’t matter

[@GLE]

It does not matter as they connect to the same bus bar. Same effect, less work

[@joegua5228]

Thank you for the quick response. ordering one now

[@mikemauch2695]

With this mod I can go from 6800 to just 7000W?

[@zimbronrons]

is this correct?

[@atomicsociety6981]

What gauge wire and type of wire is used?

[@GLE]

It’s on our website

[@permanentlypatriotic]

12AWG