Top post! Had this problem for a while assuming it was the actuator. Tried the reset and it worked first time without having to clear the fault code. Thanks so much for your post.
I have a volvo and same thing happened to me. Left the car parked with a weakish battery for 9 days while i travelled. Came back to this error. Don't know why these manufacturers switched to an electronic system for this when the reliable mechanical system really didnt need to be changed.
the cause on that was the contacts on the fuses were dirty/faulty. by removing and reinstalling, the fuse, it got a better contact. i would replace the fuse or clean the contacts w/ Sandpaper
Hi my bmw 5gt making big noise when you press parking brake, find out that driver side cable broken, how do you think what could be issue? Is it sensor or relay?thanks
Hi. What do you mean by big noise? My 2011 530D GT gives me an error that the parking brake is not working but it's actually working. The gong keeps going on though.
I had the error code 006023 and the yellow parking brake light was constantly on display. It dissapeared after error code reset with Carly and resetting the parking brake by pressing brake and pushing down the parking brake switch. Similarly as i the video.
Press and hold the brake pedal, lift e-brake liver up, on a dash you will see a indicater light coming on. You are done. To release: press and hold the brake pedal again, push the liver down. You done.
Did you head a very loud screeching noise after unlocking the car? Mine did & after replacing with a refurbished one, it did the same thing. I have a new one this time to install.
Hi,you can check this link,how to use inpa clear the error:ua-cam.com/video/nRiAmraKciM/v-deo.html If you need motor and gear you can check this link:www.ebay.com/itm/352548743953 www.ebay.com/itm/352854661805
He guys I bought the cheapest cable on Amazon: BMW K+DCAN USB to OBDII OBD2 Car Cable Diagnostic Scanner Tool I paid about US $20 for it. Used the driver software that came with the cable and also here: www.bimmergeeks.net/downloads Once you get the cable connected properly, the INPA software (downloaded from link above) should detect the car. Follow the software menus to reset the parking brake.
Did anyone even try to just disconnect the negative battery cable for 30 minutes?? That would make more sense to me instead of doing all this work for no reason.
Top post! Had this problem for a while assuming it was the actuator. Tried the reset and it worked first time without having to clear the fault code. Thanks so much for your post.
Were these the errors you saw?
4EC8: position sensor
4EC9: parking lock
4ECA: parking lock
4FF5: Shift-by-wire EGNER counter
Did you ever get the fix on the your tire pressure monitors?
I have a volvo and same thing happened to me. Left the car parked with a weakish battery for 9 days while i travelled. Came back to this error. Don't know why these manufacturers switched to an electronic system for this when the reliable mechanical system really didnt need to be changed.
Thanks for this video. Where can I get that special cable from any links?
the cause on that was the contacts on the fuses were dirty/faulty. by removing and reinstalling, the fuse, it got a better contact. i would replace the fuse or clean the contacts w/ Sandpaper
Hi my bmw 5gt making big noise when you press parking brake, find out that driver side cable broken, how do you think what could be issue? Is it sensor or relay?thanks
Hi. What do you mean by big noise? My 2011 530D GT gives me an error that the parking brake is not working but it's actually working. The gong keeps going on though.
The issue was a broken cable lol it could happen because it was old or when they adjust the cable to tight
@@VV-yh3ni Did you solve your problem? I have the exact same issue...
Where the fuses located
Thank you!
I had the error code 006023 and the yellow parking brake light was constantly on display. It dissapeared after error code reset with Carly and resetting the parking brake by pressing brake and pushing down the parking brake switch. Similarly as i the video.
On this video you said the reset method of pedal and parking brake button. How do you do that?
Not familiar with system.
Press and hold the brake pedal, lift e-brake liver up, on a dash you will see a indicater light coming on. You are done. To release: press and hold the brake pedal again, push the liver down. You done.
Did you head a very loud screeching noise after unlocking the car? Mine did & after replacing with a refurbished one, it did the same thing. I have a new one this time to install.
Taga Carael
Did you fix it?
Yes fixed with a brand new unit from dealer
Will just resetting the code solve the error?
Reset all the time and the parking light keep coming back
Hi, could you tell us how you coded the error step by step please.
Thanks
Sinan Alhamdani codes the error.? Say what
Hi,you can check this link,how to use inpa clear the error:ua-cam.com/video/nRiAmraKciM/v-deo.html
If you need motor and gear you can check this link:www.ebay.com/itm/352548743953
www.ebay.com/itm/352854661805
When fitting the cable back in how far must it be screwed in
Thank you for sharing this DIY
He guys I bought the cheapest cable on Amazon:
BMW K+DCAN USB to OBDII OBD2 Car Cable Diagnostic Scanner Tool
I paid about US $20 for it.
Used the driver software that came with the cable and also here: www.bimmergeeks.net/downloads
Once you get the cable connected properly, the INPA software (downloaded from link above) should detect the car. Follow the software menus to reset the parking brake.
Have a car with the same issue
The reset works for me for like 5 seconds then comes back. Oh well
Did anyone even try to just disconnect the negative battery cable for 30 minutes??
That would make more sense to me instead of doing all this work for no reason.
The codes are permanent in flash, this is an old school method which does not work anymore