Very good presentation. What's the difference between this and the STC-3028? Why does the STC-3028 have 3 sensor wires and this one has 4? Is this some newer version / generation of STC-3028? ThY
@@robojax Hi master :) I bought 2 pieces. Could you tell me how to calibrate the STH2000 to another reference meter so that it shows the same value as it? Thanks.
Thanks, Ahmad for your through introduction of this SHT2000...I love that it can easily help me control my incubator that will run with 110 volts supply. Is it able to control the heater in a .1 degree cycle say from 37.5 to 37.6 centigrade?
thank you. I replied to your other comment. this is one of the best. Thank you for not skipping the ads and keep watching them. This will help me a lot.
السلام عليكم ، لقد قمت بتضمين الترجمة العربية وهذا أفضل ما يمكنني فعله. هل رأيت أو استخدمت التسمية التوضيحية العربية التي تظهر أسفل الفيديو؟ أنا فارسي من خراسان الكبير ولا أتحدث العربية. خراسان الكبير هي أرض الإمام البخاري والترمذي وابن ماجه والإمام مسلم وغيرهم. حاليًا ، يُطلق على خراسان اسم ظلم "أفغانستان" تم إجباره على سكان خرسان التي يبلغ عدد سكانها مليوني نسمة معظمهم من الفارسية والحنفية.
I'm looking for a controller for a single greenhouse ventilation fan. With this device in order to control both temperature and humidity using a single fan, it appears I would have to wire terminals 7 and 9 to the power source for the fan, and terminals 8 and 10 to the fan motor in order to have temperature and humidity controls wired in parallel. Is that correct?
Hi, it seems have skipped the video. Absolutely there no better way to show how to wire this. If I want to answer this , I have to watch the video as I forgot what happened then. so please watch the wiring section or the main hardware explanation. may be twice or 2 times the
Hello sir...Im from Indonesia...I have one Question regarding This Devices...I saw The Sensor Cable 90 Cm Only...Possible we Can Change the Cable sensor up to 150 M ..If its possible how we can connect..and the reading temprature still acurated or diffrent..? Thank u very much sir..
Hello, Welcome to Robojax UA-cam channel. this module does not have correction setting. When you increase the length, it might affect the reading. So module allow to compensate the reading and add or subtract value. You try it by measuring temperature with the standard wire, then connect longer wire and see how much it deviates. if it is closer to the actual value, you can trust it. I believe it should work. but have not tested it so I don't know for sure.
There's something weird with my thermostat.. I'm using it for an incubator, I set the temperature to 55-60 and put water in the incubator but it reads 40% humidity and it won't go higher, I cleaned the sensor already and everything, tte incubator has water too,.. what could it be? Please someone help me.
this is humidity controller. not humidity adder. you have to have humidifier or dehumidifier and this module control that for you. I am not sure if your incubator has humidifier or dehumidifier. it is up to you, perhaps you have not watched the video fully. Watch, listen and pay attention to what I said. Good luck and stay safe.
I won't to use something like this to control the heaters and cooling fan's on my fish tanks is the sensor in the background that you didn't use water proof and can you recommend something that can handle 240v 1000w heater and all so run cooling fan's
@@robojax after more shopping around the stc-3008 seems to suit my needs better have you looked at them yet and do you know how reliable the relays are fish tank heaters usually fale by sticking on and over heat the water I want to stop it happening to me again 😊
Hi, this is our company‘s product, thank you for posting this vedio.❤
Hi, we have more videos of yours. Contact me if you want to cooperate via robojax.com contact page.
I just bought one to use for a meat curing cabinet build. This will be perfect!
I want to use this in a very high humidy area, will condensation ruine the detection probe?
So if i wanted to run a humidifier and a dehumidifier + air conditioner and a heater i would need 2 of these units?
Very good presentation.
What's the difference between this and the STC-3028?
Why does the STC-3028 have 3 sensor wires and this one has 4?
Is this some newer version / generation of STC-3028?
ThY
I believe it is exactly the same except the screen is arranged differently. The same sensor. But I have not tested it.
@@robojax Hi master :) I bought 2 pieces. Could you tell me how to calibrate the STH2000 to another reference meter so that it shows the same value as it?
Thanks.
Thanks, Ahmad for your through introduction of this SHT2000...I love that it can easily help me control my incubator that will run with 110 volts supply. Is it able to control the heater in a .1 degree cycle say from 37.5 to 37.6 centigrade?
thank you. I replied to your other comment. this is one of the best. Thank you for not skipping the ads and keep watching them. This will help me a lot.
أستاذأحمد نريد من حضرتك شرح مفصل باللغه العربية
السلام عليكم ، لقد قمت بتضمين الترجمة العربية وهذا أفضل ما يمكنني فعله. هل رأيت أو استخدمت التسمية التوضيحية العربية التي تظهر أسفل الفيديو؟ أنا فارسي من خراسان الكبير ولا أتحدث العربية. خراسان الكبير هي أرض الإمام البخاري والترمذي وابن ماجه والإمام مسلم وغيرهم. حاليًا ، يُطلق على خراسان اسم ظلم "أفغانستان" تم إجباره على سكان خرسان التي يبلغ عدد سكانها مليوني نسمة معظمهم من الفارسية والحنفية.
I'm looking for a controller for a single greenhouse ventilation fan. With this device in order to control both temperature and humidity using a single fan, it appears I would have to wire terminals 7 and 9 to the power source for the fan, and terminals 8 and 10 to the fan motor in order to have temperature and humidity controls wired in parallel. Is that correct?
Hi, it seems have skipped the video. Absolutely there no better way to show how to wire this. If I want to answer this , I have to watch the video as I forgot what happened then. so please watch the wiring section or the main hardware explanation. may be twice or 2 times the
Thank you , is it 110v , 60Hz?
You are welcome. I have connected it to 120V (in Canada). it will work with 220V.
Hi if I want to use this but with a different heating element, say a silicone heating pad, will this be ok to use?
As long as the same sensor is used this will function well.
Hello sir...Im from Indonesia...I have one Question regarding This Devices...I saw The Sensor Cable 90 Cm Only...Possible we Can Change the Cable sensor up to 150 M ..If its possible how we can connect..and the reading temprature still acurated or diffrent..? Thank u very much sir..
Hello, Welcome to Robojax UA-cam channel. this module does not have correction setting. When you increase the length, it might affect the reading. So module allow to compensate the reading and add or subtract value. You try it by measuring temperature with the standard wire, then connect longer wire and see how much it deviates. if it is closer to the actual value, you can trust it. I believe it should work. but have not tested it so I don't know for sure.
Hello from indonesia
Hello from Canada.
There's something weird with my thermostat.. I'm using it for an incubator, I set the temperature to 55-60 and put water in the incubator but it reads 40% humidity and it won't go higher, I cleaned the sensor already and everything, tte incubator has water too,.. what could it be? Please someone help me.
this is humidity controller. not humidity adder. you have to have humidifier or dehumidifier and this module control that for you. I am not sure if your incubator has humidifier or dehumidifier. it is up to you, perhaps you have not watched the video fully. Watch, listen and pay attention to what I said. Good luck and stay safe.
I won't to use something like this to control the heaters and cooling fan's on my fish tanks is the sensor in the background that you didn't use water proof and can you recommend something that can handle 240v 1000w heater and all so run cooling fan's
of course this is not for liquid. use this ua-cam.com/video/DBRI7ry0Ku8/v-deo.html
@@robojax thank you looks good just concerned about the maximum load could I fit a better relay I would like to run a 500w or 1000w heater 👍
@@robojax after more shopping around the stc-3008 seems to suit my needs better have you looked at them yet and do you know how reliable the relays are fish tank heaters usually fale by sticking on and over heat the water I want to stop it happening to me again 😊
Hi - - can this be calibrated?
doesn't need calibration.
Может быть откалиброван. Одновременно зажимаете две верхних клавиши или две нижних. Предел - -9,9 - 0,0+9,9