1989-1998 Sierra / Silverado GMC obs 2002 5.3LS swap using factory fusebox.
Вставка
- Опубліковано 2 гру 2022
- BONUS INFO
am running a
-97 fuel pump assembly or updated 60psi pump
-Braided fuel lines and fittings kit from Evil Energy you will need Russell 648060 for use with factory fuel filter and SUM-220627B, SUM-220628B to complete your fuel line kit. 8/10 if you do it on the floor but 2/10 if you take the bed off its easier.
-Light blue and white at DRAC module goes to Green and white wire from ecu for speed.
-White wire goes straight to the Tach white wire for engine speed.
- MIL to MIL brown wires
-White wire from brake switch is a good signal for TCC relay.
-Solid green wire from ECM is for obd2 port will need batt [+] and grounds. and thats it.
-SCHOENFELD 1302LS1 headers clear pretty good.
- lt1swap.com for more wiring info.
-Dirty Dingo mounts.
Honestly after watching and reading this you shouldn't have not one question about this swap lol.
This was my 4th or so video EVER for YT i know i can make it better and i will try. - Авто та транспорт
Thanks compa showing the cables did help alot!!! 🔥🔥🔥🙏🙏
Good information I needed
Cooking the brake line.
Did you get the trans to shift out of 3rd? If so how? Did you have to power the trans through the fuse box?
Yes is explained in the video. How to wire up the transmission and how to do the brake signal
They told me too youse the camaro firebird one
Yes, that is the one. It came in. Am using the stock computer. But am sure the terninator takes those signals
Can you explain a little more how you are running the fuel pump wire with out the factory relay?
I am using the fuel pump relay from the 02 factory fuse box.
@@LS_SP33D so if I’m using a aftermarket harness then I would have to keep the obs relay? I didn’t see a wire on the harness for fuel pump
Well it depends on the harness some come with relays ready to be used
If you dont have one just find the pump wire and wire up a relay for it. From the key on signal
@@LS_SP33D thanks
Wich cluster do you going too youse? With that water sensor?
Stock gauge cluster. The water sensor has one line for ecu and one for oem gauge. So basically, a 2002 camaro ls sensor will do it.
Even if i am yousing the holley terminator x max ?thank you
The grey wire does no needs a relay for fuel pump!! It has 1 already on stock box
Buenas noches nececito ayuda en soportes de motor tengo un Chevy el camino y le voy hacer swap de un motor 5.3 Kiro saber cómo son los que tengo que usar
Buscalos en google la verdad no se cuales sean para ese coche
Where’d you find the driver side battery tray
Used the oem tray it fits and bolts up pretty good
Where does the starter (purple) wire go ?
Is in the video i wish i remembered off top of my head
If its a 03+ pcm and harness, u can hook it like factory!! Did, If not u can use ur own relay! Or lastly u can just leave it the way it its! From switch to starter!!
How r u running the fans???
They run full time by relay. But yes you can control by ecu via HP tuners.
They sell sensors that will ground out. At certain temperatures, btw if you wanna do a clean install. You can use it on the other head.