WINDSHIELD INSTALLATION ON JIM'S 1957 OLDSMOBILE ROCKET 88
Вставка
- Опубліковано 20 сер 2024
- We're here at Jim's today to help him install the windshield in his 1957 Oldsmobile Rocket 88 🔥
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
/ badchad
CHECK OUT OUR MERCHANDISE HERE:
www.hiltzautoc...
FOLLOW US ON SOCIAL MEDIA:
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #oldsmobilerocket88 #1957oldsmobile #oldsmobile #rocket88 #windshieldinstallation
Please keep having Jim make guest appearances, he is so likeable, you just have to smile.
Well done camera work on the Windshield install Jolene. Ages ago I was a Glazier's Apprentice for about 2 years, and put in hundreds of windshields. It was fun to watch these two gents go at it on this Oldsmobile. The rope was as least twice as large a diameter that was should have been used. We always cleaned everything pristine before starting, including the rubber gasket. We'd never use an oil derivative lubricant as if there was a gasket leak the caulking wouldn't stick. Hopefully it will seal up as is and you'll be golden.
I'm glad Chad went out to see Jim the first time and got him back into being around other people, loneliness can be horrible. I like privacy and not too much socializing ,but I do enjoy talking to someone once in a while and connecting.
Me too!
We all need human interaction to stay healthy.
Jim is a very knowledgeable person. There's always a history lesson
hi chad-never put anything slick in the windshield groove-it will give it a place to come off the glass-place the bottom in to the car first and slap it in and down-pull the top of the glass and rubber down to seat the bottom. once the bottom is in; lube the inside on the rubber so it will slip in as you pull the rope-pull the rope about a foot at a time on each side until you get within a foot from the center-now pull both sides until the rope comes out. now slap the glass until it seats. I have been in the body shop 40 years. I am retired now and build hot rods. I really like your show and have picked up some great tips along the way. keep going and i will keep watching. Larry
Road trip to Jim's garage. Always interesting and a good change of pace.
Thus is true though perhaps the mics will be setup so we can all hear Jim's wisdom.
Jim made me think of something. I bought a van with a 4.3 V6 that flooded terribly! So bad that in the mile from where I bought it to my house, it gained almost a quart of gas in the oil! Everyone said you need to try a temperature sensor. I would’ve bet money that they were wrong. But a $17 sensor cured it completely so that vehicle he was speaking of running poorly when it’s cold could have the same issue possibly. I’m not a big fan of computer control stuff, but we’re stuck with it so I better get used to it I guess. glad the windshield worked out. “👍Looking good!”
Jim is always a special treat & a lot of fun to watch! I could just sit and listen to his stories all day! Love Jim!
I must say Jim takes the tension out of any situation, I'm sitting here cracking up with laughter. Absolutely brilliant.
Always like catching up with Jim and his projects. Would love to watch him gas welding!
We love seeing Jim & Jolene & you too Chad… Jim adds good character to the videos and we all adore him…
Jim is a 'natural man' as they said in the 60's. Great to see the glass get done. Thank you, take care and peace out
We love Jim. We love you all.
I can picture Jim ripping down the road in his Ferrari in Nova Scotia. He is a total enigma and that is beautiful.
I love to hear Jolene laugh, she really enjoys what she is doing.
Simply, a lovely episode of the three of you helping each other and enjoying each others company. Relaxing watching for us, Thank you.
Always nice to see Jim and I really wish he would restore the Olds.
Jim needs his own channel i think it would be fun
Jim's getting closer and closer to spin the tires. Good helper chad. Thanks for the video Jolene 👍👍👍
All my years working on old cars I have never put in a windshield. Very interesting to watch two very humble people work together to do this job . awesome content
Chad and Jolene are definitely good people.
Love the fact Jolene laughs a lot when Jim is around.
Very nice of you to help Jim with his windshield 😊
When I was 13 years old my Great Dad taught me to drive on our Blue and White 1957 Oldsmoblile Super88. I loved that car and wish I owned it now. Jims Olds reminds me of ours but we had more paint and parts and interior on ours. They are a beautiful design inside and out and I vividly remember how much Torque that Rocket engine had and how nice and smooth the entire car was. thanks for the videos to remind me of the good ole days.
Jim is rocking & rolling on the Oldsmobile! So happy that you & Jolene went to help him out!
Gentleman Jims Rocket. I've wondered how much trouble these 55-58 curved windshields were to replace.
That a guy Chad! That's 3 good deeds in 2 days for 3 different people in two hours time! Good guy!
Great to see how Jim and yourself help each other out
its nice of you to help jim with his windshield and taking us with you on your adventure
I think your suppose to tap on the windshield on the curves to make sure its perpendicular to the flange so it sits right. I believe
You guys did a good job on windshield installation. You made that look to easy.
i never knew how a windshield is installed until watching you guy's. Great camera work Jolene 😊❤
It's upside down again. Got a good laugh out of that one. Love watching at Jims place.
What an excellent team, all three of you, so enjoyable to watch after working on my own projects. Thanks for sharing the channel.
I could visit Jim all day every day and just listen to him talking and explaining he's a good guy
Fun to watch. Always enjoy seeing Jim. Thanks for sharing.
i like watching you and Jimbo working on the sane project 😊
Nice to watch. Reminded me of replacing a windscreen on my mk.1 Capri. Had completely forgotten the whole thing. My old dad helped me. We soaked the rubber in hot soapey water to make it flexible, passed a cord from inside to outside the car, and between us in went in like magic. Good times. Windscreen cost £5. Had to remove it from the scrap yard myself, broke the 1st one, pushed the 2nd one out with my feet. Think that was 1985. 🏴
It's nice you get Jim motivated.
jim is 1 hell of a person...we like him....he has some great stories
It looks like another day with a pleasant visit with Jim.I believe I could sit and visit with him all day long.
The Queen... but we don't talk about her...
That look over at Jolene, I lost it.
Chad is something special without doubt.
Thanks again for lessons.
Well done Chad Jim and Jolene. Love that Chad doesn’t try to take over. Great respect shown by Chad to Jim. 👍👍👍
Hi Jim! It's funny for someone who says he didn't really know about windshields he had all the steps down
Pretty nice of Bad Chad to help Jim with his windshield. Another good job well done.
Jim is on top of this. It’s amazing how much knowledge he has. And wisdom.
Yes, and he spends so much money on his wardrobe; while he "rolls his own"
@@michealfigueroa6325 "Hermit Wear"
@@AustinRogers1 Available at your local Goodwill donation bin. Just say Jim sent ya.
I got a jacket there just like that one except it's blue.
@@gator2813 more money saved for the Buick build
The best personalities on a UA-cam channel.... " I had to remind myself to breath" " It's Friday " " Beautiful Jolene " Need I say any more!!
I don’t think anyone was breathing during last few minutes of installation, well done everyone was very patient..
I’ve Said it before I love the way you interact with him and the fact you help him such a lovely lovely guy well done you too
back to jims to help out what are friends for be good to see jim again
Always love a trip to Jim’s place. Thanks for bringing us along. Looking forward to a reunion of Jim, Doug , Jolene and Chad. Love the giggles from Jolene and the chuckles from the boys. Thanks guys.👍👍🇨🇦
Good to see Jim again and to get a progress report.
Yeeee Haw !!! helping Jim put the windshield in the Oldsmobile ,,, what an absolute treat , the man is totally animated , him and Chad workin together is a Hoot ! They were having a time gettin her done , Thanks folks for bringing us along , and Jolenes awesome camera work catching all the action !
I hope that he gets his car fit to drive its always fun to see Jim work he is a really smart guy
Honest Jim tells you everything that's wrong with the car before it goes wrong. 😁👍
Love seeing Jim again I like his garage with all the cars and car parts and other goodies he his a great country boy like myself
The window went in very smooth 👌
🤪👌professor Jimbo should sponsor the slippery spray product...
Worked like a charm!
Always great to see Jim on the channel
It's so good to for you CHAD to help Jim he is such a very nice person good work on the camera too Jolene
Very interesting to see how the windshield was inserted
Gotta love Jim!
We all mistakes like this all the time when working on stuff. It's just that the mistakes aren't filmed and shown around the world. Thanks for being the most relatable and real show in the history of "Reality TV".
Love watching anything the involves Jim, you pair are a legendary comedy duo, lol
Great job .Thanks Jim, Chad and Jolene.
Glad we are getting back toJim’s Olds.
You two are awesome and you have some great patience for cars and what needs to be done and this proved it , period!
It was great to see Jimbo again. Stay safe guy's
Always like catching up with Jim and his projects
wow i worked for Standard Auto Glass from 1968 to 1998 ,, you guys did a good job , Thx Ed Loretto Ontario Canada
Yesterday's show reminded me how important having the hood straight, it's the part you spend the most time looking at
Very educational! Jim is always a kick to watch and listen too!
Love seeing Jim’s cars too
I really enjoy seeing Jim in the videos! So humble, honest and just seems like the people I enjoy most! Glad to see progress on your toy Jim Cheers bi!
Working on glass is stressful to me, bravo for your team work!
Chad & Jolene it was nice watching your channel today, I thought that was so funny when you started to tell Jim what end was up on that windshield and stopped lol. But it was nice that you guys stopped at Jims and helped him with his windshield, plus visited with him . People shouldn't be by themselves all the time it starts to cause depression. So I'm glad that you 2 visit him periodically . Keep up the great work and God Bless you both and your families. 💯💪🏼👍👍🙏🙏✌😁✌
Always good to see Jim. Thanks.
Excellent, Im glad you guys decided to do this today the tutorial is really handy, I just pulled the upper tailgate off my Hillman estate to strip and paint it and I'll need to refit the window when I put it back spare windows I have so Im not bothered about braking the glass other than the mess it makes
Jimbo has done this before. Chad helped out to get this old windshield in place.😎👍🇨🇦
I wish he wrote top on the top when he had the right top on top
I sure like that 57. Those 3 piece back windows are so cool. Thanks for the video 👍
Awesome to see you spending some time with Jim more of our generation shud be giving some time to the older generations we can always learn something from them and I nkow I would like it when I am retired good stuff keep it up
Jim always makes me smile thank you Chad and Jolene
It's worth going to Jim's just to hear Jolene laugh.......
Great to hear Jolene giggling and laughing !
Great of you to be there for Jim so he at least has something to look forward to as a friend in the two of you. Thanks for sharing your time with us again today.😁
That was frickin hilarious, thanks for the entertainment with Jim...one hell of a cool guy.
I loved your video on the windshield install. Jim makes your video a joy to watch. Good camera work Joleen.
You two guys work well together. Nice to have a good friend like Jim.
I love Jim. That Olds is coming out sweet. I would make it safe and drive the wheels off it.
"It's got an end on it like your hat" best line
Good to see Jim again !
It's always Nice to see Jim you can tell he's a nice guy
Looks like a trip to jim’s place
That's great. Good to see how jim is doing. God bless you and jolene 👉👍👍🤩🤩⚘⚘⚘♥️♥️😎😎😎
I’ve found that rubber that has no cracks from drying out, can be boiled in a pot of water with a few tablespoons of real dish soap for five minutes. It will boil off dirt and soften the rubber, rinse and repeat. The rubber should now be more useable to put back in place. If storing when thoroughly dry, put in a plastic bag with some talcum powder and shake to coat, then seal in a new clean plastic bag.
Did what i had to do, now tuning in to chad and jim!
Great to see Jim working on the Buick and great on Chad and Joline for helping.
It cracks me up that all the years around cars these guys never did a windshield like this and one guy is a car builder
Always enjoy a video with Jim in it.
That went smooth, Jim's a legend